EN 14313-2009 0000 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification (Incorporates Ame.pdf

《EN 14313-2009 0000 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification (Incorporates Ame.pdf》由会员分享，可在线阅读，更多相关《EN 14313-2009 0000 Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification (Incorporates Ame.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN 14313:2009ICS 91.100.60NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDThermal insulationproducts for buildingequipment andindustrial installations Factory madepolyethylene foam(PEF) products SpecificationCopyright European Committee for Standardization Pr

2、ovided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 30 June2010 BSI 2010ISBN 978 0 580 53422 5Amendments/corrigenda issued since pu

3、blicationDate CommentsBS EN 14313:2009National forewordThis British Standard is the UK implementation of EN 14313:2009.The UK participation in its preparation was entrusted to TechnicalCommittee PRI/72, Rigid cellular materials.A list of organizations represented on this committee can be obtained on

4、request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunityfrom legal obligations.Copyright European Committee for Standardization Provided

5、 by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14313:2009EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 14313 November 2009 ICS 91.100.60 English Version Thermal insulation products for building equipment and industrial in

6、stallations - Factory made polyethylene foam (PEF) products -Specification Produits isolants thermiques pour lquipement du btiment et les installations industrielles - Produits manufacturs en mousse de polythylne (PEF) - Spcification Wrmedmmstoffe fr die technische Gebudeausrstung und fr betriebstec

7、hnische Anlagen in der Industrie - Werkmig hergestellte Produkte aus Polyethylenschaum (PEF) - Spezifikation This European Standard was approved by CEN on 29 September 2009. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ

8、ean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (Englis

9、h, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria,

10、Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATIO

11、N COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14313:2009: ECopyright European Committee for Standardization

12、 Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14313:2009EN 14313:2009 (E) 2 Contents Page Foreword 31 Scope 52 Normative references 53 Terms, definitions, symbols, units and abbreviated terms .74 Requirements .95 Test

13、methods . 156 Designation code 197 Evaluation of conformity 198 Marking and labelling . 20Annex A (normative) Factory production control . 21Annex B (normative) Determination of minimum service temperature 23Annex C (informative) Additional properties . 26Annex ZA (informative) Clauses of this Europ

14、ean Standard addressing the provisions of the EU Construction Products Directive. 28Bibliography . 36Figures Figure ZA.1 Example of CE marking information 35Tables Table 1 Dimensional tolerances (length, width, thickness, squareness) 11Table 2 Dimensional tolerances (inside diameter) 11Table 3 Level

15、s for water absorption 13Table 4 Test methods, test specimens and conditions. 16Table A.1 Minimum product testing frequencies . 21Table A.2 Minimum product testing frequencies for the reaction to fire characteristics 22Table C.1 Test methods, test specimens and conditions . 27Table ZA.1 Relevant cla

16、uses 29Table ZA.2 System(s) of attestation of conformity 30Table ZA.3 Assignment of evaluation of conformity tasks for products under system 1 . 31Table ZA.4 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 32Copyright E

17、uropean Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14313:2009EN 14313:2009 (E) 3 Foreword This European Standard (EN 14313:2009) has been prepared by Technical Committee CEN/TC 88 “Therm

18、al insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at t

19、he latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN

20、 by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive 89/106/EEC. For relationship with EU Directive 89/106/EEC, see informative Annex ZA, which is an integral part of this document. Locally responsible authorities and contracting en

21、tities, who are bound by EU Directives to specify their re-quirements using European harmonized product standards, are allowed to demand additional properties out-side the provisions of this standard if this is technically necessary because of prevailing operational conditions of the building equipm

22、ent or the industrial installation projected or because of safety regulations. This European Standard contains four annexes: Annex A (normative), Factory production control Annex B (normative), Determination of minimum service temperature Annex C (informative), Additional properties Annex ZA (inform

23、ative), Clauses of this European Standard addressing the provisions of the EU Con-struction Products Directive This document includes a bibliography. This European Standard is one of a series of standards for insulation products used in building equipment and industrial installations, but this stand

24、ard can be used in other areas, where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed be-low as a European package of standards, setting 21 months after availability as the date of withdrawal (dow) of national standards which conflict

25、 with the European Standards of this package. The package of standards comprises the following group of interrelated standards for the specifications of fac-tory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 14303, Thermal insulation products for building equi

26、pment and industrial installations Factory made mineral wool (MW) products Specification EN 14304, Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification EN 14305, Thermal insulation products for building eq

27、uipment and industrial installations Factory made cellular glass (CG) products Specification Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14313:2009EN 14313:2009 (E) 4 E

28、N 14306, Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification EN 14307,Thermal insulation products for building equipment and industrial installations Factory made ex-truded polystyrene foam (XPS) products Specifica

29、tion EN 14308, Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification EN 14309, Thermal insulation products for building equipment and industrial installations Factory made prod

30、ucts of expanded polystyrene (EPS) Specification EN 14313, Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification EN 14314, Thermal insulation products for building equipment and industrial installations Factory mad

31、e phenolic foam (PF) products Specification According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Repub-lic, Denmark, Estonia, Finland, France, German

32、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for Res

33、aleNo reproduction or networking permitted without license from IHS-,-,-BS EN 14313:2009EN 14313:2009 (E) 5 1 Scope This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial in

34、stallations with an operating tempera-ture in the range of approximately - 80 C to + 150 C. NOTE Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between - 50 C and - 80 C. The tensile str

35、ess should be kept at the minimum by applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturers advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive ba

36、cking and/or different closure systems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performa

37、nce of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulation

38、s and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(mK) at 10 C are not covered by this standard. This standard does not cover products for the insulation of the building structure. The normative part of this standard does not cover compressive stress (se

39、e Annex C, C.4). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer-ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 822,

40、Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 1604, Thermal insulating produ

41、cts for building applications Determination of dimensional stability under specified temperature and humidity conditions EN 1609, Thermal insulating products for building applications Determination of short term water absorp-tion by partial immersion EN 12085, Thermal insulating products for buildin

42、g applications Determination of linear dimensions of test specimens EN 12086, Thermal insulating products for building applications Determination of water vapour transmis-sion properties Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduct

43、ion or networking permitted without license from IHS-,-,-BS EN 14313:2009EN 14313:2009 (E) 6 EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance E

44、N 12939, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal re-sistance EN 13172, Thermal insulating products Evaluation of conformity EN 13467, Thermal insulat

45、ing products for building equipment and industrial installations Determination of dimensions, squareness and linearity of preformed pipe insulation EN 13468, Thermal insulating products for building equipment and industrial installations Determination of trace quantities of water soluble chloride, f

46、luoride, silicate, sodium ions and pH EN 13469, Thermal insulating products for building equipment and industrial installations Determination of water vapour transmission properties of preformed pipe insulation EN 13472, Thermal insulating products for building equipment and industrial installations

47、 Determination of short term water absorption by partial immersion of preformed pipe insulation EN 13501-1:2007, Fire classification of construction products and building elements Part 1: Classification using data from reaction to fire tests EN 13823, Reaction to fire tests for building products Bui

48、lding products excluding floorings exposed to the thermal attack by a single burning item EN 14366:2004, Laboratory measurement of noise from waste water installations EN 14706, Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature EN 14707, Thermal insulating products for building equipment and industrial installations Determination of maximum service temperature for preformed pipe insulation EN 15715:2009, The