EN 3660-064-2009 9375 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064 Cable outlet style K straight for heat s.pdf

《EN 3660-064-2009 9375 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064 Cable outlet style K straight for heat s.pdf》由会员分享，可在线阅读，更多相关《EN 3660-064-2009 9375 Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064 Cable outlet style K straight for heat s.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN3660-064:2009ICS 49.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDAerospace series Cable outletaccessories for circularand rectangularelectrical and opticalconnectorsPart 064: Cable outlet, style K, straight,for heat shrinkable boot, shielded,sealed, s

2、elf-locking for EN 2997 and EN4067 Product standardCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-This British Standard was published under the authority of the Standards Policy

3、 and Strategy Committee on 31January 2010 BSI 2010ISBN 978 0 580 67326 9Amendments/corrigenda issued since publicationDate CommentsBS EN 3660-064:2009National forewordThis British Standard is the UK implementation of EN 3660-064:2009. The UK participation in its preparation was entrusted to Technica

4、lCommittee ACE/6, Aerospace avionic electrical and fibre optictechnology.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct appl

5、ication. Compliance with a British Standard cannot confer immunityfrom legal obligations.Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EUROPEAN STANDARD NORM

6、E EUROPENNE EUROPISCHE NORM EN 3660-064 November 2009 ICS 49.060 English Version Aerospace series - Cable outlet accessories for circular and rectangular electrical and optical connectors - Part 064: Cable outlet, style K, straight, for heat shrinkable boot, shielded, sealed, self-locking for EN 299

7、7 and EN 4067 - Product standard Srie arospatiale - Accessoires arrire pour connecteurs circulaires et rectangulaires lectriques et optiques - Partie 064 : Raccord type K, droit, blind, tanche, pour manchon thermortractable, auto-frein pour EN 2997 et EN 4067 - Norme de produit Luft- und Raumfahrt -

8、 Endgehuse fr elektrische und optische Rund- und Rechtecksteckverbinder - Teil 064: Endgehuse, Bauform K, gerade, fr wrmeschrumpfende Bauteile, Schirmanschlu, abgedichtet, selbstsichernd fr EN 2997 und EN 4067 - Produktnorm This European Standard was approved by CEN on 20 June 2009. CEN members are

9、bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to th

10、e CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same

11、status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Rom

12、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reserved

13、 worldwide for CEN national Members. Ref. No. EN 3660-064:2009: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 2 Contents Page Foreword

14、3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Characteristics . 5 5 Tests 10 6 Identification 15 7 Marking . 16 8 Technical specification . 16 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permi

15、tted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 3 Foreword This document (EN 3660-064:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of th

16、is Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by e

17、ndorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifyi

18、ng any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece,

19、Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo repro

20、duction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 4 1 Scope This European Standard defines a range of cable outlets, style K, for use under the following conditions: The mating connectors are listed in EN 3660-002. Temperature range, Class F : 65 C

21、to 200 C; Class K : 65 C to 260 C; Class W : 65 C to 175 C. Associated electrical accessories : EN 3660-033 Metallic band (for shield termination backshells). These cable outlets are designed for termination of overall shielding braid or individual cable shields. They accommodate/permit the terminat

22、ion of heat shrinkable boots. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) appli

23、es. EN 2591-100*, Aerospace series Elements of electrical and optical connection Test methods Part 100: General EN 2997 (all parts), Aerospace series Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 C to 175 C continuous, 2

24、00 C continuous, 260 C peak EN 3660-001, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 001: Technical specification EN 3660-002, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Pa

25、rt 002: Index of product standards EN 3660-033, Aerospace series Cable outlet accessories for circular and rectangular electrical and optical connectors Part 033: Metallic band Product standard 1)AS85049A, Connector accessories, electrical general specification for 2)DIN 82, Knurling 3 Terms and def

26、initions For the purposes of this document, the terms and definitions given in EN 3660-001:2006 apply. *As well as all parts of EN 2591quoted in this standard. 1) In preparation at the date of publication of this standard. 2) Published by: Society of Automotive Engineers, Inc. (SAE), 400 Commonwealt

27、h Drive, Warrendale, PA 15096-0001. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 5 4 Characteristics 4.1 Dimensions and mass For dimens

28、ions and mass, see Figure 1 and Table 1 to Table 4. For cable entry dimensions, see 4.2. Dimensions in millimetres Key 1 Thread C 2 Marking 3 Four holes 2,8 for tools, depth = 1,27 4 RAA 1,0 DIN 82 knurling 5 Number of teeth N 6 RKV 08 DIN 82 knurling Figure 1 Cable outlet 8,06-9,340,640,7+Copyright

29、 European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 6 Table 1 Fixed dimensions of shell Dimensions in millimetres Shell size A B C D E N max. max. Thre

30、ad 0 0,25 max. Number of teeth 08 22,48 15,67 0.500-20UNF 6,86 15,3 12 10 25,65 18,64 0.625-24UNEF 9,53 15,3 15 12 28,83 21,79 0.750-20UNEF 12,98 15,3 21 14 32,00 24,99 0.875-20UNEF 14,86 15,3 24 16 35,18 28,24 1.000-20UNEF 18,03 15,3 30 18 38,55 30,94 1.062-18UNEF 20,04 15,3 33 20 41,53 34,16 1.188

31、-18UNEF 23,22 15,3 36 22 44,70 37,29 1.312-18UNEF 26,39 15,3 39 24 47,89 40,46 1.438-18UNEF 29,31 15,3 42 Table 2 Variable dimensions of wiring chamber Dimensions in millimetres Length code wiring chamber G max. H max. J A 34,6 26,3 7,40 B 42,6 34,3 15,40 C 47,6 39,3 20,40 D 57,6 49,3 30,40 The code

32、 and dimensions of the wiring chamber shall be valid for all sizes of backshell. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 7 Table 3

33、 Mass for classes F and W Mass in grams Shell size code End-fitting size code Length code wiring chamber A B C D E F G H J K L M 08 10 12 14 14,3 14,3 B 16 18 20 23,9 B 22 24 Table 4 Mass for class K Mass in grams Shell size code End-fitting size code Length code wiring chamber A B C D E F G H J K L

34、 M 08 32,5 33,9 B 10 39,3 40,4 B 12 44,7 B 14 16 18 65,2 B 20 22 83,3 B 24 96,8 B 4.2 Cable entry dimensions See Figure 2 and Table 5. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS

35、-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 8 Figure 2 Interface dimensions Table 5 Dimensions in millimetres End-fitting size code A B C D Bundle/cable diameter 0,1 0,3 min. min. max. A 4,7 7,7 12,2 1,12 2,0 4,0 B 6,4 9,4 14,0 1,12 3,9 5,5 C 7,9 11,0 15,5 1,12 5,4 7,5 D 9,5 12,6 17,1 1,12 7,4 9,0

36、E 11,1 14,1 18,7 1,12 9,4 10,5 F 12,7 15,7 20,3 1,12 10,4 12,0 G 15,9 18,9 23,5 1,12 12,4 15,5 H 19,1 22,0 26,7 1,12 15,4 18,5 J 22,2 25,2 29,8 1,75 18,4 21,5 K 25,5 28,4 33,0 1,75 21,4 25,0 L 28,6 31,5 36,2 1,75 25,4 28,0 M 31,8 34,7 39,4 1,75 28,4 31,0 NOTE The cable outlet shall be selected in ac

37、cordance with the diameter of the cable to be hardened. 4.3 Associated connectors See EN 3660-002. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:

38、2009 (E) 9 4.4 Interface dimensions Standard AS85049 interface. See Figure 3, Figure 4 and Table 6. All dimensions are in millimetres. Key 1 4,95 mm min penetration of Z diameter measured from front of teeth. 2 N number of teeth, see Table 6. Figure 3 Interface Figure 4 Dimensions Table 6 Dimensions

39、 in millimetres Shell size W X Y Z N + 0,64 0 0 0,38 + 0,38 0 0 0,25 Number of teeth 08 12,70 9,14 7,59 6,86 12 10 15,88 12,55 11,00 9,53 15 12 19,05 15,49 13,94 12,98 21 14 22,23 18,67 17,12 14,86 24 16 25,40 21,84 20,29 18,03 30 18 26,97 23,27 22,07 20,04 33 20 30,98 26,44 25,25 23,22 36 22 33,32

40、29,62 28,42 26,39 39 24 36,53 32,79 31,60 29,31 42 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 10 4.5 Material and finish Material/Fin

41、ish Class F : Aluminium/Nickel plated Material/Finish Class K : Stainless steel/Passivated Material/Finish Class W : Aluminium/Olive drab cadmium plated 4.6 Robustness assembly torque These torque values are intended for installation use only, see Table 7. Table 7 Shell size Robustness assembly torq

42、ue max. Nm Class K Classes F and W 08 7,6 5,1 10 10,2 5,1 12 14,2 5,1 14 15,3 5,1 16 15,3 5,1 18 15,3 10,2 20 17,8 10,2 22 17,8 10,2 24 17,8 10,2 5 Tests 5.1 Tests according to EN 2591-100 Test details to be in accordance with Table 8, EN 3660-001 and EN 2591-100. Qualification to be in accordance w

43、ith EN 3660-001. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 11 Table 8 EN 2591- Designation of the test Not applicable Applicable see

44、 EN 3660-001Details 101 Visual examination X 102 Examination of dimensions and mass X See 4.1 and 4.2. 205 Housing (shell) electrical continuity X Cable outlet connector connection add maximum to the values given. Class F: 2,5 m; Class W: 5 m; Class K: 10 m. 212 Surface transfer impedance (from 100

45、MHz to 1 GHz) aX Frequency Zt (m) MHz Class F Class W Class K 0,1 5 10 20 1 5 10 20 10 7 15 30 30 10 20 40 100 20 40 80 Test mounting as per 5.2. The Zt values correspond to the total surface impedance of the assembly. Test shall be achieved with a same size and class couple connectors EN 2997 (all

46、parts) than the accessory. continued Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 3660-064:2009EN 3660-064:2009 (E) 12 Table 8 (continued) EN 2591- Designation of the test Not applicable Applicable see EN 3660-001Details 213 Shielding effectiveness from 100 MHz to 1 GHz X Method 2 Frequency Minimum attenuation Classes F and W Class K MHz dB dB 100 90 80 200 88 75 300 88 73 400 87 71 800 85 66 1 000 85 65 301 Endurance at temperature X 305 Rapid chan