EN 13081-2008 en Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (Incorporates Amendment A1 2012)《危险品运输槽罐 槽罐服务设备 蒸汽收集适配.pdf

《EN 13081-2008 en Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (Incorporates Amendment A1 2012)《危险品运输槽罐 槽罐服务设备 蒸汽收集适配.pdf》由会员分享，可在线阅读，更多相关《EN 13081-2008 en Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler (Incorporates Amendment A1 2012)《危险品运输槽罐 槽罐服务设备 蒸汽收集适配.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BSEN13081:2008ICS13.300;23.020.20;23.040.60NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAWBRITISHSTANDARDTanksfortransportofdangerousgoodsServiceequipmentfortanksVapourcollectionadaptorandcoupler+A1:2012National forewordThis British Standard is the UK implementation of EN 13081:2008+A1:

2、2012. It supersedes BS EN 13081:2008 which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated by !“.The UK

3、 participation in its preparation was entrusted to Technical Committee AUE/18, Tanks for the transport of dangerous goods.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a c

4、ontract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 13081:2008+A1:2012This British Standardwas published under theauthority of the StandardsPolicy and StrategyCommittee on 31 March2009 The British Standards

5、 Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationDate Comments 31 March 2012 Implementation of CEN amendment A1:2012ISBN 978 0 580 75092 2EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13081:2008+A1 February 2012 ICS 23.040.60; 13.300; 23

6、.020.20 Supersedes EN 13081:2008English Version Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler Citernes de transport de matires dangereuses - Equipement de service pour citernes - Adaptateur et coupleur pour la rcupration des vapeurs Tank

7、s fr die Befrderung gefhrlicher Gter - Bedienungsausrstung von Tanks - VKG- und MKG-Kupplungen fr die Gassammelleitung This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 24 December 2011. CEN members are bound to comply with the CEN/CENELEC In

8、ternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to a

9、ny CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official

10、versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia

11、, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved world

12、wide for CEN national Members. Ref. No. EN 13081:2008+A1:2012: EEN 13081:2008+A1:2012 (E) 2 Contents Page Foreword 3Introduction .51 Scope 62 Normative references 63 Terms and definitions .64 Function 75 Design characteristics 75.1 General 75.2 Performance characteristics 75.3 Pressure ratings.75.4

13、Temperature range 75.5 Materials of construction 75.6 Dimensional characteristics .86 Tests 86.1 General 86.2 Production tests.86.2.1 General 86.2.2 Shell tightness test 96.2.3 Internal seat tightness test .96.2.4 Operability test .96.2.5 Test results .96.3 Type tests .96.3.1 General 96.3.2 Shell st

14、rength test. 106.3.3 Shell tightness test . 106.3.4 Internal seat tightness test 106.3.5 Mechanical endurance test 106.3.6 Mechanical strength test 106.3.7 Test results 117 Marking 118 Installation, operation and maintenance instructions 11Annex A (normative) Vapour collection adaptor to be fitted o

15、n the transport tank 12Annex B (normative) Vapour collection coupler to be fitted to the stationary loading and unloading facility 14Annex C (normative) Interlock and other devices . 15C.1 Interlock . 15C.2 DTQM tank identifier . 16Annex D (informative) 4 hole fixing 17Bibliography . 18BS EN 13081:2

16、008+A1:2012EN 13081:2008+A1:2012 (E) 3 Foreword This document (EN 13081:2008+A1:2012) has been prepared by Technical Committee CEN/TC 296 “Tanks for transport of dangerous goods”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, eith

17、er by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

18、 CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes !EN 13081:2008“. This document includes Amendment 1 approved by CEN on 2011-12-24. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. !Comp

19、ared to EN 13081:2008 the following changes have been made: a) in 3.2 a definition for “probe“ has been added; b) in Annex A (normative) specifications for the opening of the adaptor have been added; c) in Annex B (normative) specifications for the opening of the coupler have been added; d) in Annex

20、 C (normative) specifications for the interlock have been added.“ This European standard forms part of a coherent standards programme comprising the following standards, under the general title “Tanks for transport of dangerous goods - Service equipment for tanks“ EN 13081, Vapour collection adaptor

21、 and coupler EN 13082, Vapour transfer valve EN 13083, Adaptor for bottom loading and unloading EN 13308, Non pressure balanced footvalve EN 13314, Fill hole cover EN 13315, Gravity discharge coupler EN 13316, Pressure balanced footvalve EN 13317, Manhole cover assembly EN 13922, Overfill prevention

22、 systems for liquid fuels EN 14595, Pressure and Vacuum Breather Vent EN 14596, Emergency pressure relief valve EN 15208, Sealed parcel delivery systems Working principles and interface specifications BS EN 13081:2008+A1:2012EN 13081:2008+A1:2012 (E) 4 The standards programme also includes the follo

23、wing Technical Report: CEN/TR 15120, Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Sta

24、ndard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t

25、he United Kingdom. BS EN 13081:2008+A1:2012EN 13081:2008+A1:2012 (E) 5 Introduction The vapour collection adaptor and coupler are part of the vapour collection system that is required to comply with the European Directive 94/63/EC on Volatile Organic Compounds (VOC) 1. The vapour collection adaptor

26、and coupler establish a vapour tight path between the transport tank and the stationary loading and unloading facilities. BS EN 13081:2008+A1:2012EN 13081:2008+A1:2012 (E) 6 1 Scope This European Standard covers the vapour collection adaptor and coupler used to achieve a vapour tight path between th

27、e transport tank and the stationary loading and unloading facilities. This European Standard specifies the performance requirements and the critical dimensions of the vapour recovery adaptor fitted to the tank and the mating coupler fitted to a hose or to pipework connected to the stationary loading

28、 and unloading facilities. It also specifies the tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this European Standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR 2 which have a vapour p

29、ressure not exceeding 110 kPa, at 50 C and petrol, and which have no sub-classification as toxic or corrosive. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references

30、 the latest edition of the referenced document (including amendments) applies. EN 12266-1:2003, Industrial valves Testing of valves Part 1: Pressure tests, test procedures and acceptance criteria Mandatory requirements EN 12266-2:2002, Industrial valves Testing of valves Part 2: Tests, test procedur

31、es and acceptance criteria Supplementary requirements EN 15208:2007, Tanks for transport of dangerous goods - Sealed parcel delivery systems Working principles and interface specifications EN ISO 1302, Geometrical Product Specifications (GPS) Indication of surface texture in technical product docume

32、ntation (ISO 1302:2002) EN ISO 4287, Geometrical Product Specifications (GPS) Surface texture: Profile method Terms, definitions and surface texture parameters (ISO 4287:1997) ISO 2859-1, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by acceptance quality limit (A

33、QL) for lot-by-lot inspection 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 Maximum Working Pressure (MWP) gauge pressure maximum pressure to which the equipment is designed to operate, being the highest of the following three pressures: a)

34、 highest effective pressure allowed in the tank during filling (maximum filling pressure allowed) b) highest effective pressure allowed in the tank during discharge (maximum discharge pressure allowed) c) effective gauge pressure to which the tank is subjected by its contents (including such extrane

35、ous gases as it may contain) at the maximum working temperature BS EN 13081:2008+A1:2012EN 13081:2008+A1:2012 (E) 7 !3.2 probe device used to displace the obturator (poppet) of the adaptor“ 4 Function The vapour collection adaptor and coupler shall provide the following: a quick action vapour tight

36、mechanical connection between the transport tank and the stationary loading and unloading facilities for the transfer of vapour; vapour tightness when not connected. The vapour collection adaptor may be capable of accepting interlock actuators and similar devices, see Annex C. The vapour collection

37、adaptor may have provision for a sight glass to check for the presence of liquid. The vapour collection adaptor may have provision for the drainage of liquid. 5 Design characteristics 5.1 General The vapour collection adaptor and coupler shall permit the transfer of vapour only after initiation of t

38、he mating action. 5.2 Performance characteristics The manufacturer shall provide the pressure drop curves for both the vapour collection adaptor and coupler at the following conditions: flow rate up to 1 500 standard m3/h of air at 20 C (1 500 standard m3/h of air corresponds to the bottom loading o

39、f 5 compartments simultaneously each at 150 m3/h flow of substances). 5.3 Pressure ratings The vapour collection adaptor shall be capable of operating at the MWP of the transport tank to which it is attached. The vapour collection coupler shall be capable of operating at the MWP of the stationary lo

40、ading and unloading facility to which it is attached. 5.4 Temperature range Unless otherwise specified, the design temperature range shall be 20 C to + 50 C. Where the vapour collection adaptor and coupler are subjected to more severe conditions, the design temperature range shall be extended to 40

41、C or + 70 C as applicable. 5.5 Materials of construction The manufacturer shall provide with the equipment a full material specification for those parts that may come into contact with the substances described by Clause 1. BS EN 13081:2008+A1:2012EN 13081:2008+A1:2012 (E) 8 5.6 Dimensional character

42、istics The dimensions, tolerances and surface machined finish of the vapour collection adaptor and coupler shall be as given in Annexes A and B (see Figures A.1 and B.1). The mounting dimensions of the flange connecting the vapour collection adaptor to the pipework of the tank shall be as follows: o

43、utside diameter (maximum) : 174 mm; inside diameter (minimum) : 100 mm; pitch circle diameter : 150 mm; number of holes : 8 equispaced; hole diameter : 14 mm. NOTE 1 Tolerances 1 mm. NOTE 2 Holes should straddle adaptor centre line. NOTE 3 A 4 hole mounting, which can accommodate the specified 8 hol

44、e flange without loss of performance may be used as an option, see Annex D. 6 Tests 6.1 General Two classes of tests are required: production tests and type tests. Testing methods and procedures shall conform to EN 12266-1 and EN 12266-2 except as specified within this European Standard. Unless othe

45、rwise specified, test fluids shall be air or other suitable gas. The choice of the fluid is the responsibility of the manufacturer. NOTE Where the obturator forms part of the pressure containing shell, it may be closed during strength and tightness tests. 6.2 Production tests 6.2.1 General The numbe

46、r, frequency and sampling methods of production test samples shall not be less than those specified within ISO 2859-1 (AQL of 2,5). Production tests shall comprise the following: shell tightness test; internal seat tightness test; and operability test. BS EN 13081:2008+A1:2012EN 13081:2008+A1:2012 (

47、E) 9 6.2.2 Shell tightness test 6.2.2.1 Test pressure The test pressure shall conform to A.3.2.2 of EN 12266-1:2003. 6.2.2.2 Test duration The test duration shall conform to A.3.2.3 of EN 12266-1:2003. 6.2.2.3 Acceptance criteria The acceptance criteria shall conform to A.3.3 of EN 12266-1:2003. 6.2

48、.3 Internal seat tightness test 6.2.3.1 Valve classification type (for test method selection only) The valve classification type shall be a check valve as in EN 12266-1:2003, Table A.3. 6.2.3.2 Test pressure The test pressure shall be 5,5 kPa. 6.2.3.3 Test duration The test duration shall conform to

49、 Table A.4 of EN 12266-1:2003. 6.2.3.4 Acceptance criteria The acceptance criteria shall conform to rate A of EN 12266-1:2003, Table A.5. 6.2.4 Operability test The operability test shall conform to B.1 of EN 12266-2:2002. 6.2.5 Test results Test results shall be recorded and maintained in accordance with the manufacturers procedures. 6.3 Type tests 6.3.1 General A minimum o