EN 13038-2011 en Soil improvers and growing media - Determination of electrical conductivity《土壤改良剂和生长基质 电导率的测定 》.pdf

《EN 13038-2011 en Soil improvers and growing media - Determination of electrical conductivity《土壤改良剂和生长基质 电导率的测定 》.pdf》由会员分享，可在线阅读，更多相关《EN 13038-2011 en Soil improvers and growing media - Determination of electrical conductivity《土壤改良剂和生长基质 电导率的测定 》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13038:2011Soil improvers and growingmedia Determination ofelectrical conductivityBS EN 13038:2011 BRITISH STANDARDNational forewordThis British Standard is the UK implement

2、ation of EN 13038:2011. Itsupersedes BS EN 13038:2000 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee AW/20, Top soil and other growing media.A list of organizations represented on this committee can beobtained on request to its secretary.This publicati

3、on does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2011ISBN 978 0 580 68880 5ICS 65.080Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority

4、of theStandards Policy and Strategy Committee on 30 November 2011.Amendments issued since publicationDate Text affectedBS EN 13038:2011EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13038 November 2011 ICS 65.080 Supersedes EN 13038:1999English Version Soil improvers and growing media - Determ

5、ination of electrical conductivity Amendements du sol et supports de culture - Dtermination de la conductivit lectrique Bodenverbesserungsmittel und Kultursubstrate - Bestimmung der elektrischen Leitfhigkeit This European Standard was approved by CEN on 17 September 2011. CEN members are bound to co

6、mply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENEL

7、EC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the

8、same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

9、 Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2011 CEN All rights of exploitation in any form and by any

10、means reserved worldwide for CEN national Members. Ref. No. EN 13038:2011: EBS EN 13038:2011EN 13038:2011 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 Principle 45 Reagents .46 Apparatus .57 Preparation .58 Procedure .58.1 Test samples passing through a

11、20 mm sieve .58.2 Test samples passing through a 40 mm sieve .58.3 Filtration 58.4 Blank .68.5 Measuring conductivity .68.6 Measurement of the specific electrical conductivity of the filtrates 69 Precision .610 Test report 7Annex A (informative) Results of an interlaboratory trial to determine speci

12、fic electrical conductivity 8Bibliography 9BS EN 13038:2011EN 13038:2011 (E) 3 Foreword This document (EN 13038:2011) has been prepared by Technical Committee CEN/TC 223 “Soil improvers and growing media”, the secretariat of which is held by ASI. This European Standard shall be given the status of a

13、 national standard, either by publication of an identical text or by endorsement, at the latest by May 2012, and conflicting national standards shall be withdrawn at the latest by May 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

14、rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13038:1999. The main change to the previous is the change of the scope. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the f

15、ollowing countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, S

16、lovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 13038:2011EN 13038:2011 (E) 4 1 Scope This European Standard specifies an instrumental method for the routine determination of electrical conductivity in a water extract of a soil improver or growing medium. The determinatio

17、n is carried out to obtain an indication of the content of water soluble electrolytes in either soil improvers or growing media. This method is not applicable to liming materials and preformed materials such as mineral wool slabs and foam slabs. NOTE The requirements of the standard may differ from

18、the national legal requirements for the declaration of the products concerned. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the ref

19、erenced document (including any amendments) applies. EN 13040:2007, Soil improvers and growing media Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density EN ISO 3696, Water for analytical laboratory use Specif

20、ication and test methods (ISO 3696:1987) ISO 1770, Solid-stem general purposes thermometers 3 Terms and definitions For the purposes of this document the terms and definitions given in EN 13040:2007 and the following apply. 3.1 electrical conductivity ability of an aqueous extract of the sample to c

21、onduct electricity as a function of the ion concentration 4 Principle A test portion is extracted with water at (22 3,0) C in an extraction ratio of 1 : 5 (1 V sample + 5 V water) to dissolve the electrolytes. The specific electrical conductivity of the extract is measured and the result is adjusted

22、 to a measurement temperature of 25 C. 5 Reagents 5.1 Water having an electrical conductivity not higher than 0,2 mS/m at 25 C and a pH 5,6 (grade 2 water according to EN ISO 3696). 5.2 Potassium chloride solution, c(KCl) = 0,100 mol/l Dissolve 7,456 g potassium chloride, (KCl), previously dried for

23、 2 h at 105 C, in water (see 5.1) and dilute to 1000 ml. The specific electrical conductivity of this solution at 25 C is 1290 mS/m. BS EN 13038:2011EN 13038:2011 (E) 5 5.3 Potassium chloride solution, c(KCl) = 0,0100 mol/l Add 100,0 ml of potassium chloride solution (see 5.2) into a 1000 ml volumet

24、ric flask and dilute to the mark with water (see 5.1) at 20 C. The specific electrical conductivity of this solution at 25 C is 141 mS/m. Commercially available solutions may also be used. NOTE All potassium chloride solutions used for calibration should be stored in tightly sealed glass bottles whi

25、ch do not release alkali metal or alkali earth cations. 6 Apparatus 6.1 Conductivity meter fitted with a conductivity cell and equipped with adjustable measuring range setting and (automatic) temperature correction and having a resolution not greater than 1 mS/m at 25 C. Preferably, the conductivity

26、 meter should also be equipped with a cell constant control. 6.2 Analytical balance with an accuracy of 0,001 g. 6.3 Thermometer capable of measuring to the nearest 0,1 C complying with type C according to ISO 1770. 6.4 Plastic or glass containers, of sufficient capacity to accommodate the volume of

27、 the sample, extractant and 10 % air volume. 6.5 Shaking or mixing machine, capable of holding container (see 6.4) and maintaining the sample in suspension without damaging the structure of the sample. 6.6 Filter paper, with low ash content and high retentive properties. 7 Preparation Prepare the sa

28、mple in accordance with Clause 8 of EN 13040:2007 and determine the compacted laboratory bulk density of the sample in accordance with Annex A of EN 13040:2007. 8 Procedure 8.1 Test samples passing through a 20 mm sieve Take a weight equivalent 60 ml of the sample volume to the nearest 1 g and trans

29、fer to the container (see 6.4). Add 300 ml of water (see 5.1) secure the cap and shake for 1 h on the shaking machine (see 6.5) at (22 3) C. 8.2 Test samples passing through a 40 mm sieve Take a weight equivalent 250 ml of the sample volume to the nearest 1 g and transfer to the container (see 6.4).

30、 Add 1250 ml of water (see 5.1), secure the cap and shake for 1 h on the shaking machine (see 6.5) at (22 3) C. 8.3 Filtration Filter through filter paper (see 6.6) discarding the first 10 ml. In some cases, paper filtration is too slow or even impossible. In such cases alternative procedures, (e.g.

31、 centrifugation, glass fibre filter papers) may be used to obtain a clear supernatant. The technique used shall be reported. BS EN 13038:2011EN 13038:2011 (E) 6 8.4 Blank Repeat the procedures (see 8.1 to 8.2) but omitting the sample. Any modifications to the filtration procedure should also be repe

32、ated. NOTE Measurement of a blank is introduced to determine the contribution of the water, glassware and filter paper used to the electrical conductivity of the extracts. 8.5 Measuring conductivity 8.5.1 Measure the conductance (G) of the potassium chloride solutions (see 5.2 and 5.3) according to

33、the instruction manual of the instrument. 8.5.2 Calculate for potassium chloride solution (see 5.3) the cell constant according to: GKks= (1) where k is the cell constant, in reciprocal metres; Ksis the specific electrical conductance of one of the potassium chloride solutions, in millisiemens per m

34、etre; G is the measured electrical conductance of the same potassium chloride solution, in millisiemens per metre. The calculated cell constant shall not differ by more than 5 % from the value given by the manufacturer. 8.5.3 Adjust the cell constant on the conductivity meter. 8.6 Measurement of the

35、 specific electrical conductivity of the filtrates Measure within one hour of extraction the specific electrical conductivity of the filtrates in millisiemens per metre (mS/m) according to the instructions given by the manufacturer of the conductivity meter (see 6.1). Carry out the measurements with

36、 the temperature correction set at 25 C. Note the results to one decimal place. If the blank exceeds twice the detection limit of the conductivity meter, all the results from this batch are void. All the apparatus and equipment used in the extraction shall be checked and cleaned as required. No resu

37、lts shall be reported until the blank is less than twice the detection limit of the conductivity meter. NOTE 1 The measured values of the electrical conductivity can be influenced by contamination of the electrodes. This type of interference is very difficult to recognise. Pollution of the electrode

38、s may change the cell constant, which can be perceived by measuring the electrical conductance of the standard potassium chloride solutions. NOTE 2 Air bubbles on the electrodes, developed during warming up of solutions disturb the measurements. 9 Precision The repeatability and reproducibility of t

39、he specific electrical conductivity in separately prepared samples should be in accordance with Table A.1. A summary of the results of an interlaboratory trial to determine the precision of the method in accordance with ISO 5725 are given in Annex A. BS EN 13038:2011EN 13038:2011 (E) 7 The values de

40、rived from the interlaboratory trial may not be applicable to concentrations and matrices other than those given. 10 Test report The test report shall contain the following information: a) a reference to this European Standard; b) all information necessary for complete identification of the sample;

41、c) the results of the determination as whole numbers, expressed in millisiemens per metre; d) details of any operations not specified in the European Standard or regarded as optional, as well as any factor which may have affected the results; e) compacted laboratory bulk density. BS EN 13038:2011EN

42、13038:2011 (E) 8 Annex A (informative) Results of an interlaboratory trial to determine specific electrical conductivity An interlaboratory trial was organized in 1995 under the auspices of the European Committee for Standardization, to test the procedures specified in this European Standard. In thi

43、s trial the number of laboratories given in Table A.1 determined the specific electrical conductivity in three types of samples. Table A.1 Summary of the results of an interlaboratory trial for the determination of the specific electrical conductivity Sample Unfertilized peat perlite Composted coars

44、e bark Sewage sludge composted with straw Number of laboratories retained after eliminating outliers 16 16 16 Number of outliers (laboratories) 0 0 0 Mean Value (mS/m) 10,18 31,70 126,93 Repeatability standard deviation, sr (mS/m) 0,40 0,98 3,18 Repeatability relative standard deviation (%) 3,93 3,0

45、9 2,50 Repeatability limit, r = 2,8 sr(mS/m) 1,12 2,73 8,90 Reproducibility standard deviation, sR(mS/m) 2,02 5,39 11,96 Reproducibility relative standard deviation (%) 19,84 17,00 9,42 Reproducibility limit, r = 2,8 sR(mS/m) 5,71 15,11 33,50 BS EN 13038:2011EN 13038:2011 (E) 9 Bibliography EN 27888

46、, Water quality Determination of electrical conductivity (ISO 7888:1985) ISO 5725 (all parts), Accuracy (trueness and precision) of measurement methods and results This page deliberately left blankThis page deliberately left blankBSI is the independent national body responsible for preparing British

47、 Standardsand other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.British Standards Institution (BSI)raising standards worldwideBSI Group Headquarters389 Chiswick High Road

48、London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards are updated by amendment or revision. Users of British Stan-dards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and serv-ices. We would be

49、grateful if anyone finding an inaccuracy or ambiguity whileusing this British Standard would inform the Secretary of the technical com-mittee responsible, the identity of which can be found on the inside frontcover.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers Members an individual updating service called PLUS which ensuresthat subscribers automatically receive the latest editions of standards.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: plu