EN 12697-25-2005 2907 Bituminous mixtures - Test methods for hot mix asphalt - Part 25 Cyclic compression test《沥青混合料 热混沥青的试验方法 第25部分 循环压力试验》.pdf

《EN 12697-25-2005 2907 Bituminous mixtures - Test methods for hot mix asphalt - Part 25 Cyclic compression test《沥青混合料 热混沥青的试验方法 第25部分 循环压力试验》.pdf》由会员分享，可在线阅读，更多相关《EN 12697-25-2005 2907 Bituminous mixtures - Test methods for hot mix asphalt - Part 25 Cyclic compression test《沥青混合料 热混沥青的试验方法 第25部分 循环压力试验》.pdf（32页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 12697-25:2005 Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic compression test The European Standard EN 12697-25:2005 has the status of a British Standard ICS 93.080.20 Licensed Copy: Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIBS

2、 EN 12697-25:2005 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 4 May 2005 BSI 4 May 2005 ISBN 0 580 45985 5 National foreword This British Standard is the official English language version of EN 12697-25:2005. The UK participation in its p

3、reparation was entrusted by Technical Committee B/510, Road materials, to Subcommittee B/510/1, Coated macadam and hot asphalt, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standard

4、s which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This pu

5、blication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible internat

6、ional/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN titl

7、e page, pages 2 to 29 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Licensed Copy: Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEUROPEANSTANDARD NO

8、RMEEUROPENNE EUROPISCHENORM EN1269725 April2005 ICS93.080.20 Englishversion BituminousmixturesTestmethodsforhotmixasphaltPart 25:Cycliccompressiontest MlangesbitumineuxMthodesdessaipourmlange hydrocarbonchaudPartie25:Essaicycliquede compression AsphaltPrfverfahrenfrHeiasphaltTeil25: Druckschwellvers

9、uch ThisEuropeanStandardwasapprovedbyCENon15March2005. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsm

10、aybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial

11、 versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norway,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUR

12、OPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2005CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN1269725:2005:E Licensed Copy: Wang Bin, na, Fri Aug 05 06:53:

13、07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 2 Contents page Foreword 3 Introduction6 1 Scope .7 2 Normative references .7 3 Terms and definitions.7 4 Test method A Uniaxial cyclic compression test with confinement.9 4.1 Principle.9 4.2 Apparatus 10 4.3 Specimen preparation 13 4.4 Con

14、ditioning14 4.5 Test procedure 14 4.6 Calculation and expression of results.15 4.7 Test report .16 4.8 Precision16 5 Test method B Triaxial cyclic compression test17 5.1 Principle.17 5.2 Apparatus 19 5.3 Specimen preparation 22 5.4 Conditioning23 5.5 Test procedure 24 5.6 Calculation and expression

15、of results.25 5.7 Test report .27 5.8 Precision28 Bibliography.29 Licensed Copy: Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 3 Foreword This document (EN 12697-25:2005) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretaria

16、t of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by October 2005. This European Standard

17、 is one of a series of standards as listed below: EN 12697-1, Bituminous mixtures Test methods for hot mix asphalt Part 1: Soluble binder content. EN 12697-2, Bituminous mixtures - Test method for hot mix asphalt - Part 2: Determination of particle size distribution. EN 12697-3, Bituminous mixtures

18、- Test methods for hot mix asphalt - Part 3: Bitumen recovery: Rotary evaporator. EN 12697-4, Bituminous mixtures - Test methods for hot mix asphalt - Part 4: Bitumen recovery: Fractionating column. EN 12697-5, Bituminous mixtures Test methods for hot mix asphalt Part 5: Determination of the maximum

19、 density. EN 12697-6, Bituminous mixtures Test methods for hot mix asphalt Part 6: Determination of bulk density of bituminous specimens. EN 12697-7, Bituminous mixtures Test methods for hot mix asphalt Part 7: Determination of bulk density of bituminous specimens by gamma rays. EN 12697-8, Bitumino

20、us mixtures - Test methods for hot mix asphalt - Part 8: Determination of void characteristics of bituminous specimens. EN 12697-9, Bituminous mixtures Test methods for hot mix asphalt Part 9: Determination of the reference density. EN 12697-10, Bituminous mixtures Test methods for hot mix asphalt P

21、art 10: Compactability. EN 12697-11, Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen. EN 12697-12, Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous spec

22、imens. EN 12697-13, Bituminous mixtures Test methods for hot mix asphalt Part 13: Temperature measurement. EN 12697-14, Bituminous mixtures Test methods for hot mix asphalt Part 14: Water content. EN 12697-15, Bituminous mixtures - Test methods for hot mix asphalt - Part 15: Determination of the seg

23、regation sensitivity. EN 12697-16, Bituminous mixtures Test methods for hot mix asphalt Part 16: Abrasion by studded tyres. Licensed Copy: Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 4 EN 12697-17, Bituminous mixtures - Test methods for hot mix asphalt

24、- Part 17: Particle loss of porous asphalt specimen. EN 12697-18, Bituminous mixtures Test methods for hot mix asphalt Part 18: Binder drainage. EN 12697-19, Bituminous mixtures Test methods for hot mix asphalt Part 19: Permeability of specimen. EN 12697-20, Bituminous mixtures Test methods for hot

25、mix asphalt Part 20: Indentation using cube or Marshall specimens. EN 12697-21, Bituminous mixtures Test methods for hot mix asphalt Part 21: Indentation using plate specimens. EN 12697-22, Bituminous mixtures Test methods for hot mix asphalt Part 22: Wheel tracking. EN 12697-23, Bituminous mixtures

26、 - Test methods for hot mix asphalt - Part 23: Determination of the indirect tensile strength of bituminous specimens. EN 12697-24, Bituminous mixtures Test methods for hot mix asphalt Part 24: Resistance to fatigue. EN 12697-25, Bituminous mixtures Test methods for hot mix asphalt Part 25: Cyclic c

27、ompression test. EN 12697-26, Bituminous mixtures Test methods for hot mix asphalt Part 26: Stiffness. EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: Sampling. EN 12697-28, Bituminous mixtures Test methods for hot mix asphalt Part 28: Preparation of samples for determinin

28、g binder content, water content and grading. EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen. EN 12697-30, Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor. E

29、N 12697-31, Bituminous mixtures - Test methods for hot mix asphalt - Part 31: Specimen preparation by gyratory compactor. EN 12697-32, Bituminous mixtures Test methods for hot mix asphalt Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor. EN 12697-33, Bituminous mixtures -

30、 Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor. EN 12697-34, Bituminous mixtures Test methods for hot mix asphalt Part 34: Marshall test. EN 12697-35, Bituminous mixtures Test methods for hot mix asphalt Part 35: Laboratory mixing. EN 12697-36, Bituminous mixtures

31、 - Test methods for hot mix asphalt - Part 36: Determination of the thickness of a bituminous pavement. EN 12697-37, Bituminous mixtures - Test methods for hot mix asphalt - Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA. EN 12697-38, Bituminous mixtures Test meth

32、ods for hot mix asphalt Part 38: Common equipment and calibration. EN 12697-39, Bituminous mixtures Test methods for hot mix asphalt Part 39: Binder content by ignition. Licensed Copy: Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 5 prEN 12697-40, Bitumin

33、ous mixtures Test methods for hot mix asphalt Part 40: In-situ drainability. prEN 12697-41, Bituminous mixtures Test methods for hot mix asphalt Part 41: Resistance to de-icing fluids. prEN 12697-42, Bituminous mixtures Test methods for hot mix asphalt Part 42: Amount of foreign matters in reclaimed

34、 asphalt. prEN 12697-43, Bituminous mixtures Test methods for hot mix asphalt Part 43: Resistance to fuel. No existing European Standard is superseded. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europ

35、ean Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Licensed Copy:

36、 Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 6 Introduction This European Standard contains two test methods to determine the resistance to permanent deformation of a bituminous mixture by cyclic compression tests with confinement. The tests make it pos

37、sible to rank various mixes or to check on the acceptability of a given mix. They do not allow making a quantitative prediction of rutting in the field to be made. The choice for confinement was made in order to obtain realistic test results for gap-graded mixes. Licensed Copy: Wang Bin, na, Fri Aug

38、 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 7 1 Scope This European Standard describes two test methods (A and B) for determining the resistance of bituminous mixtures to permanent deformation. Test method A describes the method for determining the creep characteristics of

39、bituminous mixtures by means of an uniaxial cyclic compression test with some confinement present. In this test a cylindrical specimen is subjected to a cyclic axial stress. To achieve a certain confinement, the diameter of the loading platen is taken smaller than that of the sample. NOTE 1 Confinem

40、ent of the sample is necessary to predict realistic rutting behaviour, especially for gap-graded mixes with a large stone fraction. Test method B describes the method for determining the creep characteristics of bituminous mixtures by means of the triaxial cyclic compression test. In this test a cyl

41、indrical specimen is subjected to a confining stress and a cyclic axial stress. This test is most often used for the purpose of evaluation and development of new types of mixtures. This European Standard applies to specimens prepared in the laboratory or cored from the road. The maximum size of the

42、aggregates is 32 mm. NOTE 2 For purposes of compliance with EN 13108, the test conditions are given in prEN 13108-20. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated re

43、ferences, the latest edition of the referenced document (including any amendments) applies. EN 12697-6, Bituminous mixtures - Test methods for hot mix asphalt - Part 6: Determination of bulk density of bituminous specimens. EN 12697-27, Bituminous mixtures Test methods for hot mix asphalt Part 27: S

44、ampling. EN 12697-29, Bituminous mixtures Test methods for hot mix asphalt Part 29: Determination of the dimensions of a bituminous specimen. EN 12697-30, Bituminous mixtures Test methods for hot mix asphalt Part 30: Specimen preparation by impact compactor. EN 12697-31, Bituminous mixtures Test met

45、hods for hot mix asphalt Part 31: Specimen preparation by gyratory compactor. EN 12697-33, Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. Li

46、censed Copy: Wang Bin, na, Fri Aug 05 06:53:07 BST 2005, Uncontrolled Copy, (c) BSIEN 12697-25:2005 (E) 8 3.1 accuracy class permissible measuring error, expressed as a percentage, in the output signal of a transducer 3.2 contact area that portion of the pressure platen that is in contact with the t

47、est specimen 3.3 creep curve display of the cumulative axial strain, expressed in %, of the specimen as a function of the number of load applications NOTE Generally the following stages can be distinguished (see Figure 1) stage 1: the (initial) part of the deformation curve, where the slope of the c

48、urve decreases with increasing number of loading cycles; stage 2: the (middle) part of the deformation curve, where the slope of the curve is quasi constant and with a turning point in the deformation curve; stage 3: the (last) part of the deformation curve, where the slope increases with increasing number of loading cycles. Depending on the testing conditions and on the mix, one or more stages may be absent. Key NCumulativ