DOD A-A-54836-1993 BOX PATHOLOGICAL SPECIMEN SHIPPING《运输病理样本盒子》.pdf

《DOD A-A-54836-1993 BOX PATHOLOGICAL SPECIMEN SHIPPING《运输病理样本盒子》.pdf》由会员分享，可在线阅读，更多相关《DOD A-A-54836-1993 BOX PATHOLOGICAL SPECIMEN SHIPPING《运输病理样本盒子》.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、 . A-A-54836 9 9999974 0344395 b75 9 A-A-54 8 36 26 March 1993 COMMERCIAL ITEM DESCRIPTION BOX, PATHOLOGICAL SPECIMEN, SHIPPING The General Services Administration has authorized the use of this Commercial Item Description as a replace- ment for Military Specification MIL-B-37749, which is cancelled

2、. This Commercial Item Description covers a reusable controlled temperature shipping container sufficiently durable for use in air and parcel post shipment of anatomical specimens or other items requiring closely controlled temperatures. Salient characteristics: General. Shall be a light weight insu

3、lated shipping box consisting of a container, gasket, hinged cover, carrier strap and sealing fitting. Container. The container shall be made of a high density polyethylene shell filled with polyurethane foam. The inside dimensions shall be 17 2 1/4 inches long, 6-1/4 f. 1/4 inches wide and 7-1/2 2

4、1/4 inches deep. A plastic latching mechanism shall be provided on the front of the container to secure the hinged cover in the closed position. The outside of the container shall have a 2-3/8 f. 1/8 inches wide by 1/8 inch deep minimum vertical groove in the center of each end surface. The carrier

5、strap shall recess in this groove. Four feet, one in each corner, shall be provided on the bottom of the container. Each foot shall be 1/8 inch (minimum). Gasket. The gasket shall be made of cross linked expanded polyethylene foam at least 1/8 inch thick. The gasket shall fit the container and hinge

6、d cover interface and shall be attached to the cover with suitable adhesive. AMSC N/A FSC 8115 DISTRIBUTION STATEMENT A: Approved for public release; distribution is unlimited. O Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54836 9999974 01443

7、76 501 = . A-A- 5 4 8 3 6 Hinqed cover. density polyethylene shell filled with polyurethane foam. The cover thickness shall be 2-1/2 1/4 inches. The cover shall be attached to the container by means of corrosion resistant hinges or hinge pins and shall provide a corrosion resisting latching fitting

8、to allow the cover to be secured to the container. A 2-3/8 & 1/8 inches wide by 1/8 inch (minimum) deep continuous groove, as in the center of each end surface of the container, shall be provided in the longitudinal center of the top and ends to recess the carrier strap. The closure system shall ens

9、ure that a constant pressure is exerted between the cover and the container. The hinged cover shall consist of a high Carrier strap. The carrier strap shall consist of a woven nylon strap and a “D“ ring. The finished strap shall be 2 5 1/8 inches by 65 & 1 inches long, including the “D“ ring which s

10、hall be attached to one end of the strap. The entire outer surface of the strap shall contain hook type fasteners except for the last 2-1/2 2 1/8 inches of the end opposite the “D“ ring. This portion of the strap shall contain pile type fasteners. The strap shall recess in the grooves provided in th

11、e container and closed cover when the strap is secured. The strap shall be suitably attached to the bottom of the container to position the “D“ ring at the center of the closed cover with the strap secured. The “D“ ring shall be fabricated of corrosion resisting metal. The carrier strap shall enable

12、 the box to be carried with one hand. Sealinq fittinq. The sealing fitting shall consist of 1/8 inch (minimum) inside diameter eyebolt, fabricated of corrosion resisting metal. The eye bolt threaded section shall be securely fastened to the container to enable the eye to protrude through a slot in t

13、he moveable latch portion when the latch is secured to the cover. Style, desiqn and dimensions. The pathological specimen shipping box shall be in accordance with Figure 1 for style, design and dimension. Finish. The exterior surface of the pathological specimen shipping box shall be legibly marked

14、with the manufacturers labels affixed that comply with title 42 Public Health Act. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54836 9999974 0344397 448 = A-A- 5 4 8 3 6 Identification markinq and labelinq. The pathological specimen shippin

15、g box shall be legibly and permanently marked with the name of the manufacturer or their registered trademark. Performance. Water leakage. The pathological specimen shipping box shall show no signs of water leaking when tested as follows: filled with water, the cover closed, latched and the strap se

16、cured, box turned upside down and left undisturbed for 5 minutes , Air leakaqe. The pathological specimen shipping box shall show no sign of leaking when tested as follows: the latched box with strap secured, pressurized with 2 PSI gauge air pressure and submerged in a water bath for at least 2 minu

17、tes. Weisht. The pathological specimen shipping box weight shall be approximately 13 lbs. Cleaninq. The interior and exterior surfaces of the pathological specimen shipping box and carier strap shall be completely washable and capable of being cleaned with warm soapy water. Instructions for use. The

18、 pathological specimen shipping box shall be provided with instructions for use which shall include a caution statement indicating that prior to shipping, a label complying with title 42 Public Health Act (Etiologic Agents) Biomedical Material shall be attached to the containers exterior top or side

19、 surfaces. O Workmanship. The pathological specimen shipping box shall be free from defects which detract from its appearance or impair its serviceability. Unit. Each (EA). One pathological specimen shipping box as specified, constitutes one unit, 3 Provided by IHSNot for ResaleNo reproduction or ne

20、tworking permitted without license from IHS-,-,-A-A-5483b m 9999974 0344398 384 m A-A-5 4 8 3 6 QUALITY ASSURANCE PROVISIONS. Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements

21、as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any

22、of the inspections set forth in the specification where such inspection are deemed necessary to assure supplies and services conform to prescribed requirements. Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to t

23、he Government upon the Governments request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate. Inspection. Inspection, as used herein, is defined as both examination (such as visual or

24、 auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item. Examination. Examination shall be conducted to determine compliance with specification requirements. Samplinq for ex

25、amination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one pathological specimen shipping box as specified. Sampling shall be inspection level II with an Acceptable Quality Level (AQL) of 1.0. T

26、ests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for determination of two or more test characteristics. SamDlins for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herei

27、n. product for test purposes shall be one pathological specimen shipping box. of 1.0. Unit of Sampling shall be inspection level S-2 with an AQL 4 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-54836 9999974 0144399 210 M A-A-54 8 3 6 Contractor

28、 certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this Commercial Item Description, and that the product conforms to the producers own drawings, specifications, standards, and quality assurance practices. T

29、he government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract. Metric products. Products manufactured to metric dimensions will be considered on an equal basis with those manufactured

30、 using inch-pound units, providing they fall within the tolerance specified using conversion tables contained in the latest revision of Federal Standard No. 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tol

31、erances specified in the inch-pound units, a request should be made to the contracting officer to determine if the product is acceptable, The contracting officer has the option of accepting or rejecting the product. Requlatory reuuirements. Federal Food, Druq, and Cosmetic Act. If the product covere

32、d by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regu

33、lations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations. Recovered materials. The offeror/contrac

34、tor is encouraged to use recovered material in accordance with Federal Acquisition Regulation Subpart 23.4 to the maximum extent practical. 5 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-5483b = 9999974 0344400 8b2 A-A-5 4 8 3 6 Preservation,

35、packaqinq, P ackinq, labelinq, and markinq. Unless otherwise specified, preservation, packaging, and packing shall be to a degree of proLection to preclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc:, involving shipment from the supply source to the

36、receiving activity, plus reshipment from receiving activity and shall conform to applicable carriers rules and regulations. Intermediate and exterior package quantities and labeling and marking shall be as specified in the contract and/or order. Orderins data. Intermediate/exterior package quantitie

37、s and labeling and marking must be specified in the contract and/or order. NOTE: The following National Stock Number and its respective Item Identification is covered by this document: NATIONAL STOCK NUMBER ITEM IDENTIFICATION 8115-01-013-8533 BOX, PATHOLOGICAL SPECIMEN SHIPPING, INSULATED, Plastic

38、MILITARY INTERESTS: Preparing Activity: Custodians: DoD-MB Army - MD Navy - MS Air Force - 03 CIVIL AGENCY COORDINATING ACTIVITIES: VA-OSS USPHS FDA-MPQAS Agent: DLA-DM Project Number: 8115-0543 Location: c:worddocericboxcid 6 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-. 1 . = A-A-54836 - I m 9939374 0144401 7T9 D A-A-5 4 8 3 6 44 .I o/- 7 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-