DLA MS39058 REV C-2005 SWITCH SENSITIVE-24 VOLTAGE DC (WATERPROOF)《传感开关24伏高压直流(防水)》.pdf

《DLA MS39058 REV C-2005 SWITCH SENSITIVE-24 VOLTAGE DC (WATERPROOF)《传感开关24伏高压直流(防水)》.pdf》由会员分享，可在线阅读，更多相关《DLA MS39058 REV C-2005 SWITCH SENSITIVE-24 VOLTAGE DC (WATERPROOF)《传感开关24伏高压直流(防水)》.pdf（2页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC/N/A 1 of 2 FSC 5930 INCH-POUND MS39058C 21 July 2005 SUPERSEDING MS39058B (AT) 16 February 1988 MILITARY SPECIFICATION SHEET SWITCH, SENSITIVE-24 VOLTAGE DC (WATERPROOF) INACTIVE FOR NEW DESIGN, DATED 8 MARCH 1999 This specification is approved for use by all Departments and Agencies of the Dep

2、artment of Defense. The requirements for acquiring the products described herein shall consist of this specification sheet and the issue specified in the solicitation: MIL-DTL-13484. NOTES: 1. All dimensions are in inches. Tolerance is 0.031 (0.79 mm) for decimals. 2. In the event of a conflict betw

3、een the text of this military specification and the references cited herein, the text of this military specification shall take precedence. 3. Referenced Government documents are specified in the solicitation form a part of this military specification to the extent specified herein. FIGURE 1. Dimens

4、ions and configuration. Inches mm Inches mm Inches mm 0.031 0.79 0.281 7.14 0.531 13.49 0.0625 1.59 0.313 7.95 0.563 14.30 0.125 3.18 0.375 9.53 0.594 15.09 0.250 6.35 0.406 10.31 0.813 20.65 0.280 7.11 0.438 11.13 1.813 46.05 Provided by IHSNot for ResaleNo reproduction or networking permitted with

5、out license from IHS-,-,-MS39058C 2 MS PIN Former PIN Switch type Contact arrangement “L“ dimension MS39058-1 ORD 7974220 I SP/ST Normally open 31.00 (787.4) MS39058-2 ORD 7974221 I SP/ST Normally closed 12.19 (309.6) MS39058-3 ORD 7974222 II SP/ST Normally open/ Normally closed 12.19 (309.6) REQUIR

6、EMENTS: Switch type shall be as specified in the tabulation. Switch casing material: Rubber SC 410 AC1E3F2in accordance with ASTM-D2000. Actuation force: 1 to 2 pounds within 0.125 inch (3.18 mm) of center of actuation area. Release force: 6 ounces minimum. Release time: 0.25 second maximum. Pretrav

7、el: 0.015 minimum. Overtravel: 0.015 minimum. Movement differential: 0.005 maximum. Current rating: 7.5 amperes lamp load, 7.5 amperes inactive load (L/R ratio .026); 15 amperes resistive load. Marginal notations are not used in this revision to identify changes with respect to the previous issue du

8、e to the extend of changes. Referenced Documents: MIL-DTL-13484 ASTM-D2000 Custodians: Preparing activity: Army - AT DLA - CC (Project 5930-1919-002) NOTE: The activities listed above were interested in this document as of the date of the this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the Assist Online database at http:/assist.daps.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-