DLA MIL-PRF-39003 6 F-2012 CAPACITOR FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR33.pdf

《DLA MIL-PRF-39003 6 F-2012 CAPACITOR FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR33.pdf》由会员分享，可在线阅读，更多相关《DLA MIL-PRF-39003 6 F-2012 CAPACITOR FIXED ELECTROLYTIC (SOLID ELECTROLYTE) TANTALUM (POLARIZED SINTERED SLUG) ESTABLISHED RELIABILITY STYLE CSR33.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、AMSC N/A FSC 5910 INCH-POUND MIL-PRF-39003/6F 23 August 2012 SUPERSEDING MIL-PRF-39003/6E 3 December 2009 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG), ESTABLISHED RELIABILITY, STYLE CSR33 This specification is approved for u

2、se by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF-39003. Inches mm .094 2.39 .250 6.35 1.500 38.10 CIRCUIT DIAGRAM FIGURE 1. Dimensions and configuration. FAILURE RATE LEV

3、ELS “M”, “P”, AND “R” ARE INACTIVE FOR NEW DESIGN AFTER 2 FEBRUARY 1984. FAILURE RATE LEVEL “S” IS INACTIVE FOR NEW DESIGN AFTER 15 AUGUST 1984. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/6F 2 Case size Dimensions L .031 (0.79) D +

4、 .016 (0.41) - .015 (0.38) M .002 (0.05) J max A B C D .286 (7.26) .474 (12.04) .686 (17.42) .786 (19.96) .135 (3.43) .185 (4.70) .289 (7.34) .351 (8.92) .020 (0.51) .020 (0.51) .025 (0.64) .025 (0.64) .422 (10.72) .610 (15.49) .822 (20.88) .922 (23.42) NOTES: 1. Dimensions are in inches. 2. Metric

5、equivalents are in parentheses and are given for general information only. 3. The case insulation shall extend .015 (0.38 mm) minimum beyond each end. However, when a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body. 4. Lead length may be a minimum of 1-inch long fo

6、r use in tape and reel automatic insertion equipment, when specified. FIGURE 1. Dimensions and configuration Continued. REQUIREMENTS: Requirements: Requirements shall be in accordance with MIL-PRF-39003, and as specified herein. Design and construction: Capacitors shall be of the design, constructio

7、n, and physical dimensions specified on figure 1. Case type: Tubular, insulated. Material: Metal (alloy unspecified). Type of seal: Hermetic. Leads: Type N-32, N-52, W-32 or W-52 of MIL-STD-1276. DC rated voltage: See table I. Above +85C voltage derating is required (see MIL-PRF-39003). DC leakage (

8、DCL): See table I. Capacitance (Cap.) (nom): See table I. Cap. tolerance: See table I. Dissipation factor (DF): See table I. Operating temperature: -55C to +125C. Failure rate level: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE

9、I. Electrical characteristics and PINs. DC rated voltage Capaci- tance Capaci- tance tolerance DC leakage at Dissipation factor at -55C through +125C Case size PIN M39003/06- 1/ failure rate level for (%1000 hrs.) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001)

10、volts 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 F 10 10 12 100 100 330 330 390 470 470 680 680 820 1000 1000 percent 10 20 10 10 20 10 20 10 10 20 10 20 10 10 20 A 0.5 0.5 0.5 1 1 2 2 2 2 2 5 5 5 5 5 A 2 2 2 3 3 8 8 8 8 8 10 10 10 10 10 percent 6 6 6 8 8 8 8 10 10 10 10 10 10 10 10 A A A B B C C C C C D D D D D

11、 0001- 0002- 0003- 0004- 0005- 0006- 0007- 0008- 0009- 0010- 0011- 0012- 0013- 0014- 0015- 0101- 0102- 0103- 0104- 0105- 0106- 0107- 0108- 0109- 0110- 0111- 0112- 0113- 0114- 0115- 0201- 0202- 0203- 0204- 0205- 0206- 0207- 0208- 0209- 0210- 0211- 0212- 0213- 0214- 0215- 0301- 0302- 0303- 0304- 0305-

12、 0306- 0307- 0308- 0309- 0310- 0311- 0312- 0313- 0314- 0315- 5001- 5002- 5003- 5004- 5005- 5006- 5007- 5008- 5009- 5010- 5011- 5012- 5013- 5014- 5015- 2001- 2002- 2003- 2004- 2005- 2006- 2007- 2008- 2009- 2010- 2011- 2012- 2013- 2014- 2015- 3001- 3002- 3003- 3004- 3005- 3006- 3007- 3008- 3009- 3010-

13、 3011- 3012- 3013- 3014- 3015- 4001- 4002- 4003- 4004- 4005- 4006- 4007- 4008- 4009- 4010- 4011- 4012- 4013- 4014- 4015- 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 6.8 6.8 8.2 47 47 56 68 68 82 220 220 270 390 470 470 560 10 20 10 10 20 10 10 20 10 10 20 10 10 10 20 10 0.5 0.5 0.5 1 1 1 1 1 1 1

14、 1 2 2 4 4 4 2 2 2 2 2 4 4 4 4 7 7 10 16 16 16 16 6 6 6 6 6 6 6 6 6 8 8 8 10 10 10 10 A A A B B B B B B C C C D D D D 0016- 0017- 0018- 0019- 0020- 0021- 0022- 0023- 0024- 0025- 0026- 0027- 0028- 0029- 0030- 0031- 0116- 0117- 0118- 0119- 0120- 0121- 0122- 0123- 0124- 0125- 0126- 0127- 0128- 0129- 01

15、30- 0131- 0216- 0217- 0218- 0219- 0220- 0221- 0222- 0223- 0224- 0225- 0226- 0227- 0228- 0229- 0230- 0231- 0316- 0317- 0318- 0319- 0320- 0321- 0322- 0323- 0324- 0325- 0326- 0327- 0328- 0329- 0330- 0331- 5016- 5017- 5018- 5019- 5020- 5021- 5022- 5023- 5024- 5025- 5026- 5027- 5028- 5029- 5030- 5031- 20

16、16- 2017- 2018- 2019- 2020- 2021- 2022- 2023- 2024- 2025- 2026- 2027- 2028- 2029- 2030- 2031- 3016- 3017- 3018- 3019- 3020- 3021- 3022- 3023- 3024- 3025- 3026- 3027- 3028- 3029- 3030- 3031- 4016- 4017- 4018- 4019- 4020- 4021- 4022- 4023- 4024- 4025- 4026- 4027- 4028- 4029- 4030- 4031- See footnote a

17、t end of table. MIL-PRF-39003/6F3Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-TABLE I. Electrical characteristics and PINs. Continued. DC rated voltage Capaci- tance Capaci- tance tolerance DC leakage at Dissipation factor at -55C through +125C Ca

18、se size PIN M39003/06- 1/ failure rate level for (%1000 hrs.) +25C +85C +125C M (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) volts 15 15 15 15 15 15 15 15 15 15 15 15 15 15 F 4.7 4.7 5.6 33 33 39 150 150 180 220 220 270 330 330 percent 10 20 10 10 20 10 10 20 10 10 20 10 10 20

19、 A 0.5 0.5 0.5 1 1 1 1 1 2 2 2 2 2 2 A 2 2 2 2 2 2 7 7 10 10 10 16 16 16 percent 4 4 4 6 6 6 8 8 8 8 8 8 8 8 A A A B B B C C C D D D D D 0032- 0033- 0034- 0035- 0036- 0037- 0038- 0039- 0040- 0041- 0042- 0043- 0044- 0045- 0132- 0133- 0134- 0135- 0136- 0137- 0138- 0139- 0140- 0141- 0142- 0143- 0144- 0

20、145- 0232- 0233- 0234- 0235- 0236- 0237- 0238- 0239- 0240- 0241- 0242- 0243- 0244- 0245- 0332- 0333- 0334- 0335- 0336- 0337- 0338- 0339- 0340- 0341- 0342- 0343- 0344- 0345- 5032- 5033- 5034- 5035- 5036- 5037- 5038- 5039- 5040- 5041- 5042- 5043- 5044- 5045- 2032- 2033- 2034- 2035- 2036- 2037- 2038- 2

21、039- 2040- 2041- 2042- 2043- 2044- 2045- 3032- 3033- 3034- 3035- 3036- 3037- 3038- 3039- 3040- 3041- 3042- 3043- 3044- 3045- 4032- 4033- 4034- 4035- 4036- 4037- 4038- 4039- 4040- 4041- 4042- 4043- 4044- 4045- 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 2.7 3.3 3.3 3.9 18 22 22 27 56 68 68

22、82 100 100 120 150 150 180 10 10 20 10 10 10 20 10 10 10 20 10 10 20 10 10 20 10 0.5 0.5 0.5 0.5 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 10 10 10 10 10 10 10 10 10 10 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 8 8 8 A A A A B B B B C C C C C C C D D D 0046- 0047- 0048- 0049- 0050- 0051- 0052- 0053- 0054- 005

23、5- 0056- 0057- 0058- 0059- 0060- 0061- 0062- 0063- 0146- 0147- 0148- 0149- 0150- 0151- 0152- 0153- 0154- 0155- 0156- 0157- 0158- 0159- 0160- 0161- 0162- 0163- 0246- 0247- 0248- 0249- 0250- 0251- 0252- 0253- 0254- 0255- 0256- 0257- 0258- 0259- 0260- 0261- 0262- 0263- 0346- 0347- 0348- 0349- 0350- 035

24、1- 0352- 0353- 0354- 0355- 0356- 0357- 0358- 0359- 0360- 0361- 0362- 0363- 5046- 5047- 5048- 5049- 5050- 5051- 5052- 5053- 5054- 5055- 5056- 5057- 5058- 5059- 5060- 5061- 5062- 5063- 2046- 2047- 2048- 2049- 2050- 2051- 2052- 2053- 2054- 2055- 2056- 2057- 2058- 2059- 2060- 2061- 2062- 2063- 3046- 304

25、7- 3048- 3049- 3050- 3051- 3052- 3053- 3054- 3055- 3056- 3057- 3058- 3059- 3060- 3061- 3062- 3063- 4046- 4047- 4048- 4049- 4050- 4051- 4052- 4053- 4054- 4055- 4056- 4057- 4058- 4059- 4060- 4061- 4062- 4063- MIL-PRF-39003/6F4Provided by IHSNot for ResaleNo reproduction or networking permitted without

26、 license from IHS-,-,-See footnote at end of table. TABLE I. Electrical characteristics and PINs. Continued. DC rated voltage Capaci- tance Capaci- tance tolerance DC leakage at Dissipation factor at -55C through +125C Case size PIN M39003/06- 1/ failure rate level for (%1000 hrs.) +25C +85C +125C M

27、 (1.0) P (0.1) R (0.01) S (0.001) G (1.0) B (0.1) C (0.01) D (0.001) volts 35 35 35 35 35 35 35 35 35 35 35 35 F 1.8 8.2 10 10 33 33 39 47 47 56 68 68 percent 10 10 10 20 10 20 10 10 20 10 10 20 A 0.5 1 1 1 1 1 1 1 1 2 2 2 A 2 2 2 2 5 5 5 5 5 10 10 10 percent 4 6 6 6 6 6 6 6 6 6 6 6 A B B B C C C C

28、C D D D 0064- 0065- 0066- 0067- 0068- 0069- 0070- 0071- 0072- 0073- 0074- 0075- 0164- 0165- 0166- 0167- 0168- 0169- 0170- 0171- 0172- 0173- 0174- 0175- 0264- 0265- 0266- 0267- 0268- 0269- 0270- 0271- 0272- 0273- 0274- 0275- 0364- 0365- 0366- 0367- 0368- 0369- 0370- 0371- 0372- 0373- 0374- 0375- 5064

29、- 5065- 5066- 5067- 5068- 5069- 5070- 5071- 5072- 5073- 5074- 5075- 2064- 2065- 2066- 2067- 2068- 2069- 2070- 2071- 2072- 2073- 2074- 2075- 3064- 3065- 3066- 3067- 3068- 3069- 3070- 3071- 3072- 3073- 3074- 3075- 4064- 4065- 4066- 4067- 4068- 4069- 4070- 4071- 4072- 4073- 4074- 4075- 50 50 50 50 50 5

30、0 50 50 50 50 50 50 1.2 1.5 1.5 5.6 6.8 6.8 22 22 27 33 33 39 10 10 20 10 10 20 10 20 10 10 20 10 0.5 0.5 0.5 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 5 5 5 9 9 9 4 4 4 4 6 6 6 6 6 6 6 6 A A A B B B C C C D D D 0076- 0077- 0078- 0079- 0080- 0081- 0082- 0083- 0084- 0085- 0086- 0087- 0176- 0177- 0178- 0179- 0180

31、- 0181- 0182- 0183- 0184- 0185- 0186- 0187- 0276- 0277- 0278- 0279- 0280- 0281- 0282- 0283- 0284- 0285- 0286- 0287- 0376- 0377- 0378- 0379- 0380- 0381- 0382- 0383- 0384- 0385- 0386- 0387- 5076- 5077- 5078- 5079- 5080- 5081- 5082- 5083- 5084- 5085- 5086- 5087- 2076- 2077- 2078- 2079- 2080- 2081- 2082

32、- 2083- 2084- 2085- 2086- 2087- 3076- 3077- 3078- 3079- 3080- 3081- 3082- 3083- 3084- 3085- 3086- 3087- 4076- 4077- 4078- 4079- 4080- 4081- 4082- 4083- 4084- 4085- 4086- 4087- 1/ Dash number shall include a letter that indicates user preference for surge current/high temperature solder or the dash w

33、ill be deleted. MIL-PRF-39003/6F5Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/6F 6 REQUIREMENTS Continued: Stability at low and high temperatures: In accordance with MIL-PRF-39003. Step 1 (+25C): DCL: See table I. Capacitance: Within

34、 tolerance of table I value. DF: See table I. Step 2 (-55C): Capacitance: Shall not change more than 10 percent of step 1 measured value. DF: See table I. Step 3 (+25C): DCL: See table I. Capacitance: Shall not change more than 2 percent of step 1 measured value. DF: See table I. Step 4 (+85C): DCL:

35、 See table I. Capacitance: Shall not change more than 8 percent of step 1 measured value. DF: See table I. Step 5 (+125C): DCL: See table I. Capacitance: Shall not change more than 12 percent of step 1 measured value. DF: See table I. Step 6 (+25C): DCL: See table I. Capacitance: Shall not change mo

36、re than 2 percent of step 1 measured value. DF: See table I. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-MIL-PRF-39003/6F 7 Surge voltage: In accordance with MIL-PRF-39003. DCL: See table I. Capacitance: Shall not change more than 2 percent of in

37、itial measured value. DF: See table I. Life: Method 108 of MIL-STD-202. 240, 1,000, and 2,000 hours: At +25C (as applicable): DCL: See table I. Capacitance: Shall not change more than 5 percent of initial measured value. DF: See table I. At +85C: DCL: See table I. At +125C: DCL: See table I. 4,000,

38、6,000, 8,000, and 10,000 hours (exponential only): At +25C (as applicable): DCL: 200 percent of initial limit. Capacitance: Shall not change more than 10 percent of initial measured value. DF: See table I. At +85C: DCL: 200 percent of initial limit. At +125C: DCL: 200 percent of initial limit. Marki

39、ng: In accordance with MIL-PRF-39003. Part or Identifying Number (PIN): M39003/06-(dash number from table I). Substitutability data: Substitutability for failure rate levels and capacitance tolerances shall be in accordance with MIL-PRF-39003. Provided by IHSNot for ResaleNo reproduction or networki

40、ng permitted without license from IHS-,-,-MIL-PRF-39003/6F 8 Reference documents. In addition to MIL-PRF-39003, this specification sheet references the following documents. MIL-STD-202 MIL-STD-1276 Changes from previous issue. The margins of this specification are marked with vertical lines to indic

41、ate where modifications from this revision were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irresp

42、ective of the marginal notations. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project 5910-2010-013) DLA - CC Review activities: Navy - AS, MC, OS, SH Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil/ . Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-