DLA AN149251 THRU AN149350 REV 2 (1)-2003 BOLT - SOCKET HEAD 6 HOLES DRILLED 625-18.pdf

《DLA AN149251 THRU AN149350 REV 2 (1)-2003 BOLT - SOCKET HEAD 6 HOLES DRILLED 625-18.pdf》由会员分享，可在线阅读，更多相关《DLA AN149251 THRU AN149350 REV 2 (1)-2003 BOLT - SOCKET HEAD 6 HOLES DRILLED 625-18.pdf（1页珍藏版）》请在麦多课文档分享上搜索。

1、 AN149251 THRU AN149350 REV 2 AMENDMENT 1 12 MAY 2003 AIR FORCE-NAVY AERONAUTICAL STANDARD BOLT SOCKET HEAD, 6 HOLES DRILLED, .625-18 This amendment forms a part of AN149251 THRU AN149350 REV 2, dated 1 AUGUST 1958, and is approved for use by all Departments and Agencies of the Department of Defense

2、. PAGE 1 Surface roughness: Delete “AS107” and substitute “ASME B46.1”. Manufacturing specification: Delete “ASM7452” and substitute “AS7452”. Delete the whole sentence “For definition and application of drawing status notes, see ANA Bulletin No. 337.”. Custodians: Preparing Activity: Navy - AS DLA-IS Air Force - 99 (Project 5306-2704) AMSC N/A FSC 5306 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. INCH-POUND Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-