DLA A-A-59911-2012 ANCHOR ROCK CHOCK TYPE I REPLACEMENT KITS.pdf

《DLA A-A-59911-2012 ANCHOR ROCK CHOCK TYPE I REPLACEMENT KITS.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-59911-2012 ANCHOR ROCK CHOCK TYPE I REPLACEMENT KITS.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、 AMSC N/A FSC 8465 A-A-59911 28 August 2012 COMMERCIAL ITEM DESCRIPTION ANCHOR, ROCK, CHOCK, TYPE I REPLACEMENT KITS The General Services Administration has authorized the use of this Commercial Item Description for all Federal agencies. 1. SCOPE. This Commercial Item Description (CID) covers the re

2、quirements for kits that replace the Anchor, Rock, Chock (A-A-59834) issued in the Assault Climber Team Kit (ACTK) (A-A-59873) completely or in part. 2. CLASSIFICATION. The Anchor, Rock, Chock, Replacement Kits for Type I Wedge, wired will be furnished as four kits. 2.1 Classes Class I - Complete Se

3、t Replacement Kit Class II - Anchor, Rock Chock Type I, Small Replacement Kit Class III - Anchor, Rock Chock Type I, Medium Replacement Kit Class IV -Anchor, Rock Chock Type I, Large Replacement Kit 2.2 Sizing. The chocks will be as light-weight as possible, while meeting the standards described in

4、the description. 3. SALIENT CHARACTERISTICS. The kits shall be composed of the following items in the following quantities as listed in Table I: Comments, suggestions, or questions on this document should be addressed to: Attn: DLA Troop Support, Standardization Team, 700 Robbins Avenue, Philadelphi

5、a, PA 19111-5096. Since contact information can change, you may want to verify the currency of this address information using Acquisition Streamlining and Standardization Information System (ASSIST) online database at https:/assist.dla.mil METRIC Provided by IHSNot for ResaleNo reproduction or netwo

6、rking permitted without license from IHS-,-,-A-A-59911 2 TABLE I. Type I quantities requirements TYPE SIZE QUANTITY CLASS I CLASS II CLASS III CLASS IV I 1 1 1 N/A N/A I 2 1 1 N/A N/A I 3 1 1 N/A N/A I 4 1 1 N/A N/A I 5 1 N/A 1 N/A I 6 1 N/A 1 N/A I 7 1 N/A 1 N/A I 8 1 N/A N/A 1 I 9 1 N/A N/A 1 I 10

7、 1 N/A N/A 1 I 11 1 N/A N/A 1 3.1 Dimensions. Individual item dimensions for Type I shall be in accordance with drawings and specification requirements specified in the applicable CID document (see A-A-59834) unless item is a manufacturers part number/cage code then, in which case manufacturers curr

8、ent specifications apply. 3.2 Color. Individual item colors for Anchor, Rock, Chock Type I Replacement Kits shall be in accordance with applicable specifications. (See A-A-59834). 3.3 End item testing. Individual item test standards for Anchor, Rock, Chock Type I Replacement Kits shall be in accorda

9、nce with their related International Climbing and Mountaineering Federation Standards, where applicable. (See A-A-59834). 3.4 Materials. Individual item materials shall be in accordance with the applicable specifications (see A-A-59834). 3.5 Workmanship. The Anchor, Rock, Chock, Type I Replacement K

10、its shall conform to the quality of product established by this document and the related document for each item (A-A-59834). The occurrence of defects shall not exceed the contractors own quality assurance standards and the quality assurance standards defined in the technical data in the solicitatio

11、n and/or contract. 3.6 Service life. The Anchor, Rock, Chock, Type I Replacement Kits shall have no unexpected material or component failures during a continuous one-year cycle. The Anchor, Rock, Chock, Replacement Kits shall have no unexpected material or component failures during periodic use over

12、 a five year period. 3.7 Labels/barcoding/instruction slip. If applicable, all labeling, barcoding and instruction slip requirements shall be as specified in the solicitation or contract (see 7.2). 3.7.1 Labels. Each Anchor, Rock, Chock Type I Replacement Kit shall have identification label Class 5

13、conforming to Type VI of MIL-DTL-32075. The color of the label shall be white. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59911 3 The following information shall be included in the printing for the identification label: ANCHOR, ROCK, CHOCK,

14、TYPE I REPLACEMENT KIT NSN: XXXX-XX-XXX-XXXX (Example) The following instruction information shall be supplied: a. The name or trademark of the manufacturer, importer or supplier b. The meaning of any marking on the product c. The use of the product d. How to choose other components for use in the s

15、ystem e. How to maintain and service the product f. The lifespan of the product or how to access it g. The effects of chemical reagents and temperature on the product h. The effects of storing and aging i. Identification of the model, if more than one model is available 4. REGULATORY REQUIREMENTS. T

16、he offeror/contractor is encouraged to use recovered materials to the maximum extent practicable, in accordance with paragraph 23.403 of the Federal Acquisition Regulation (FAR). 4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or environmentally preferable mate

17、rials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements and promotes economically advantageous life cycle costs. 5. PRODUCT CONFORMANCE PROVISIONS. 5.1 Product conformance. The products provided shall meet the sali

18、ent characteristics of this Commercial Item Description, conform to the producers own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial marketplace. The Government reserves the right to require proof of such conformance.

19、5.2 End item examination. Each kit shall be examined for the following defects as listed in Table II: TABLE II. End item examination Examine Defect Description Components Missing components Incorrect item, size, type or color Label, barcoding and instruction slip (if applicable) Incorrect, illegible

20、, omitted or misplaced 5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order (see 7.2). 6. PACKAGING. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59911 4 6.1 Preservation, packing and marking. Th

21、e preservation, packing and marking shall be as specified in the contract or order (see 7.2) and as below. 7. NOTES. 7.1 Sources of Government documents. 7.1.1 Copies of Government documents are available online at https:/assist.dla.mil/quicksearch/ or from the Standardization Documents Order Desk,

22、Building 4D, 700 Robbins Avenue, Philadelphia, PA 19111-5094. 7.1.2 Federal Acquisition Regulations are available online at http:/acquisition.gov/far/index.html or by contacting the Superintendent of Documents at 202-512-1800. 7.2 Ordering data. The contract or order should specify the following: a.

23、 Title, number, and date of this Commercial Item Description. b. When required, labeling, barcoding and instruction slip (see 3.7) c. Acceptance criteria (see 5.3). d. Packaging (see 6.1). 7.3 National Stock Numbers (NSNs). The following is a list of NSNs and Sizes associated for Type I, to determin

24、e the required items for the replacement kit that corresponds to A-A-59834, Anchor, Rock, Chock, listed below: NSNs SIZES 8465-01-578-6458 1 8465-01-578-6642 2 8465-01-578-6671 3 8465-01-578-6823 4 8465-01-578-6849 5 8465-01-578-6852 6 8465-01-578-6859 7 8465-01-578-7082 8 8465-01-578-7089 9 8465-01

25、-578-7162 10 8465-01-578-7310 11 7.4 Key words. Assault Climber Team Climbing Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-59911 5 MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITY: Custodians: GSA-FSS Army GL Navy MC PREPARING ACTIVITY:

26、DLA-CT Project Number: 8465-2012-025 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https:/assist.dla.mil. Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-