DLA A-A-30094 A-1987 WHEELCHAIR FOLDING《折叠轮椅》.pdf

《DLA A-A-30094 A-1987 WHEELCHAIR FOLDING《折叠轮椅》.pdf》由会员分享，可在线阅读，更多相关《DLA A-A-30094 A-1987 WHEELCHAIR FOLDING《折叠轮椅》.pdf（3页珍藏版）》请在麦多课文档分享上搜索。

1、I -. - A-A-30074A I35 W 7777774 O025843 4 W - (I-q45 A-A-3094A January 28, 1987 SUPERSEDING July 19, 1983 A-A- 30094 COMMERCIAL ITEM DESCRIPTION WHEELCHAIR, FOLDING The General Services Administration has authorized the use of this commercial item description as a replacement for VA Specification X-

2、l529c, which is cancelled. Thi s commerci al i tem description describes a wheelchai r for general use by hospitalized patients and beneficiaries, Salient characteristics: The wheelchair shall be an adult, manual, folding wheelchair with large wheels in the rear. The wheelchair shall be of tubular s

3、teel construction with chrome plated frame, flame resistant artificial leather or impregnated vinyl reinforced seat and back. The wheelchair shall be equipped with metal side panels, handbrakes on the large wheels, and wood or plastic base arm rests covered with flame resistant vinyl or shall be sol

4、id molded plastic. The seat shall be not less than 18 inches wide and not less than 16 inches deep and shall carry a 250 pound load without failure of the seat or chair. The wheelchair shall have push handles with handgrips and handrims on the rear wheels which shall have 36 spokes and be 24 inches

5、in diameter, bicycle type. The front casters shall be free rolling, 8 inches in diameter by 1 inch, and swivel yoke mounted. Tires front and rear shall be nonmarking gray solid rubber. Footrests shall be the fold-up type, stationary in angle to the wheelchair but adjustable in length. The wheelchair

6、 shall fold and open simply and quickly in one operation. The seat, back, and armrests shall be blue. Iletric products. Products manufactured to metric dimensions will b e considered on an equal basis with those manufactured using i nch-pound units, provi di ng they fa1 1 wi thi n the to1 erances sp

7、ecified using conversion tab1 es contained in the latest revision of Federal Standard 376, and all other requirements of this document are met. If a product is manufactured to metric dimensions and those dimensions exceed the tolerances specified in the inch/pound units, a request should be made to

8、the contracting officer to determine if the product is acceptable. The contracting officer has the option of accepting or rejecting the product. / . THIS DOCUMENT CONTAINS 3 PAGES. FSC 6530 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-30074A 6

9、5 7977774 0025844 6 U A-A- 30094.A Contractor certification: The contractor shall certify that the product offered meets the salient characteristics of this description, and conforms to the producers own drawings, specifications, standards and quality assurance practices. The Government reserves the

10、 right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract, A-A-30094A Regulatory requirements - Federal Food, Drug and Cosmetic Act - If covered by this document has been determ Food and Drug Administratio

11、n to be under the product ned by the I its .s. jurisdiction, the offerorlcontractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of the Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addi tiort, th

12、e offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal , State, and local statutes, ordinances, and regulations. Recovered materials - The offeror/contractor is encouraged to use recovered materi al

13、i n accordance with Public Law 580, as amended and as implemented by Federal Acquisition Regulation 23.4 to the maximum extent practical. Preservation, packaging, packing, labeling, and marking - Unless otherwise specified, preservation, packaging and packing shall be to a degree of protection to pr

14、eclude damage to containers and/or contents thereof under normal shipping conditions, handling, etc., involving shipment from the supply source to the receiving activity, plus reshipment from receiving activity, and shall conform to applicable carriers rules and regulations. Intermediate and exterio

15、r package quantities and labeling and marking shall be as specified in the contract and/or order. 2 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-A-A-3007rlA b5 W 7777774 0025q5 A- A- 30094A NOTE The following National Stock Number is covered by th

16、is document: NSN 6530-00-551 -4354 Ordering data. Purchasers should select the preferred options permi tted herein, and i ncl ude the fol 1 owi ng i nformati on i n procurement documents: -(a) Title, number, and date of this commercial item description t MILITARY INTERESTS: CIVIL AGENCY COORDINATING ACTIVITIES: Military Coordinating Activity: PHS FDA-MPQAS DO D - M B PREPARING ACTIVITY: VA-OSS VAMKC (904) Agent VA-OSS VACO (92B) AGENT: DLA-DM Custodians: Army-MD Navy-MS Air Force-O3 3 Provided by IHSNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-