DIN EN ISO 16585-2003 Closed end blind rivets with break pull mandrel and protruding head - A2 SSt (ISO 16585 2002) German version EN ISO 16585 2002《封闭型盘头抽芯盲铆钉 A2 SSt》.pdf

《DIN EN ISO 16585-2003 Closed end blind rivets with break pull mandrel and protruding head - A2 SSt (ISO 16585 2002) German version EN ISO 16585 2002《封闭型盘头抽芯盲铆钉 A2 SSt》.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 16585-2003 Closed end blind rivets with break pull mandrel and protruding head - A2 SSt (ISO 16585 2002) German version EN ISO 16585 2002《封闭型盘头抽芯盲铆钉 A2 SSt》.pdf（8页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 21.060.40Geschlossene Blindniete mit Sollbruchdorn und Flachkopf A2/SSt (ISO 16585 : 2002)European Standard EN ISO 16585 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision taken by CEN/TC 1

2、85 to adopt, withoutalteration, International Standard ISO 16585 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss MechanischeVerbindungselemente (Fasteners Standards Committee), Technical Committee Niete.DIN EN ISO 3269 is the standard correspond

3、ing to International Standard ISO 3269 referred to in clause 2of the EN.National Annex NAStandard referred to(and not included in Normative references)DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000)Ref. No. DIN EN ISO 16585 : 2003-04English price group 06 Sales No. 110608.03DEUTSCH

4、E NORM April 2003EN ISO 16585Continued overleaf.EN comprises 6 pages. No part of this standard may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).

5、Closed end blind rivets with break pull mandrel andprotruding head A2/SSt(ISO 16585 : 2002)English version of DIN EN ISO 16585English versionICS 21.060.40Management Centre: rue de Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr N

6、ormungClosed end blind rivets with pull mandrel andprotruding head A2/SSt(ISO 16585 : 2002) 2002. CEN All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN ISO 16585 : 2002 ERivets aveugles rupture de tige corps ferm, tte bombe A2/SSt(ISO 1658

7、5 : 2002)Geschlossene Blindniete mit Soll-bruchdorn und Flachkopf A2/SSt(ISO 16585 : 2002)This European Standard was approved by CEN on 2002-10-14.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of a

8、national standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ards may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any

9、other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany,

10、Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the United Kingdom.EN ISO 16585November 2002Page 2EN ISO 16585 : 2002ForewordInternational StandardISO 16585 : 2002 Closed end blind rivets with pull mandrel and protruding head A2/

11、SSt,which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, has beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and acces-sories, the Secretariat of which is held by DIN, as a European Standard.This European Standar

12、d shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, and conflicting national standards withdrawn, by May 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing cou

13、ntries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 16585 : 2002 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 16585 : 2002Page 4EN ISO 16585 : 2002Page 5EN ISO 16585 : 2002Page 6EN ISO 16585 : 2002