DIN EN ISO 16583-2003 Open end blind rivets with break pull mandrel and countersunk head - Cu St or Cu Br or Cu SSt (ISO 16583 2002) German version EN ISO 16583 2002《开口型沉头抽芯盲铆钉 Cu .pdf

《DIN EN ISO 16583-2003 Open end blind rivets with break pull mandrel and countersunk head - Cu St or Cu Br or Cu SSt (ISO 16583 2002) German version EN ISO 16583 2002《开口型沉头抽芯盲铆钉 Cu .pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 16583-2003 Open end blind rivets with break pull mandrel and countersunk head - Cu St or Cu Br or Cu SSt (ISO 16583 2002) German version EN ISO 16583 2002《开口型沉头抽芯盲铆钉 Cu .pdf（9页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 21.060.40Offene Blindniete mit Sollbruchdorn und Senkkopf Cu/St oder Cu/Br oder Cu/SSt (ISO 16583 : 2002)European Standard EN ISO 16583 : 2002 has the status of a DIN Standard.A comma is used as the decimal marker.National forewordThis standard has been published in accordance with a decision ta

2、ken by CEN/TC 185 to adopt, withoutalteration, International Standard ISO 16583 as a European Standard.The responsible German body involved in its preparation was the Normenausschuss MechanischeVerbindungselemente (Fasteners Standards Committee), Technical Committee Niete.DIN EN ISO 3269 is the stan

3、dard corresponding to International Standard ISO 3269 referred to in clause 2of the EN.AmendmentsDIN 7337, August 1991 edition, has been superseded by the specifications of EN ISO 16583, which isidentical to ISO 16583.Previous editionsDIN 7337: 1985-05, 1985-07, 1991-08.National Annex NAStandard ref

4、erred to(and not included in Normative references)DIN EN ISO 3269 Fasteners Acceptance inspection (ISO 3269 : 2000)Ref. No. DIN EN ISO 16583 : 2003-04English price group 07 Sales No. 110708.03DEUTSCHE NORM April 2003EN ISO 16583Continued overleaf.EN comprises 7 pages. No part of this standard may be

5、 reproduced without the prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Open end blind rivets with break pull mandrel andcountersunk head Cu/St or Cu/Br or Cu/SSt(ISO 16583

6、: 2002)English version of DIN EN ISO 16583This standard, together withDIN EN ISO 14589, August 2001edition, DIN EN ISO 15977 toDIN EN ISO 15984, andDIN EN ISO 16582 andDIN EN ISO 16584, April 2003editions, supersedes DIN 7337,August 1991 edition.English versionICS 21.060.40Management Centre: rue de

7、Stassart 36, B-1050 BrusselsEuropean Committee for StandardizationComit Europen de NormalisationEuropisches Komitee fr NormungOpen end blind rivets with break pull mandrel andcountersunk head Cu/St or Cu/Br or Cu/SSt(ISO 16583 : 2002) 2002. CEN All rights of exploitation in any form and by any means

8、reserved worldwide for CEN national members.Ref. No. EN ISO 16583 : 2002 ERivets aveugles rupture de tige corps ouvert, tte fraise Cu/St ouCu/Br ou Cu/SSt (ISO 16583 : 2002)Offene Blindniete mit Sollbruchdornund Senkkopf Cu/St oder Cu/Broder Cu/SSt (ISO 16583 : 2002)This European Standard was approv

9、ed by CEN on 2002-10-14.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such national stand-ard

10、s may be obtained on application to the Management Centre or to any CENmember.The European Standards exist in three official versions (English, French, German).A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Manage

11、ment Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, the CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzer-land, and the

12、United Kingdom.EN ISO 16583November 2002Page 2EN ISO 16583 : 2002ForewordInternational StandardISO 16583 : 2002 Open end blind rivets with break pull mandrel and countersunk head Cu/St or Cu/Br orCu/SSt,which was prepared by ISO/TC 2 Fasteners of the International Organization for Standardization, h

13、as beenadopted by Technical Committee CEN/TC 185 Threaded and non-threaded mechanical fasteners and acces-sories, the Secretariat of which is held by DIN, as a European Standard.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by e

14、ndorsement, and conflicting national standards withdrawn, by May 2003 at the latest.In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-ing countries are bound to implement this European Standard:Austria, Belgium, the Czech Republic, Denmark, F

15、inland, France, Germany, Greece, Iceland, Ireland, Italy,Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.Endorsement noticeThe text of the International Standard ISO 16583 : 2002 was approved by CEN as a European Standard withoutany modification.Page 3EN ISO 16583 : 2002Page 4EN ISO 16583 : 2002Page 5EN ISO 16583 : 2002Page 6EN ISO 16583 : 2002Page 7EN ISO 16583 : 2002