DIN EN ISO 14123-2-2016 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2 Methodology leading to verification pro.pdf

《DIN EN ISO 14123-2-2016 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2 Methodology leading to verification pro.pdf》由会员分享，可在线阅读，更多相关《DIN EN ISO 14123-2-2016 Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2 Methodology leading to verification pro.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、May 2016 English price group 11No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.110!%SM9“2484222www.din.deDIN EN

2、ISO 14123-2Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery Part 2: Methodology leading to verification procedures (ISO 14123-2:2015);English version EN ISO 14123-2:2015,English translation of DIN EN ISO 14123-2:2016-05Sicherheit von Maschinen

3、 Minderung von Gesundheitsrisiken, die auf Gefahrstoffemissionen von Maschinen zurckzufhren sind Teil 2: Methodik beim Aufstellen von berprfungsverfahren (ISO 14123-2:2015);Englische Fassung EN ISO 14123-2:2015,Englische bersetzung von DIN EN ISO 14123-2:2016-05Scurit des machines Rduction des risqu

4、es pour la sant rsultant de substances dangereuses mises par des machines Partie 2: Mthodologie menant des procdures de vrification (ISO 14123-2:2015);Version anglaise EN ISO 14123-2:2015,Traduction anglaise de DIN EN ISO 14123-2:2016-05SupersedesDIN EN 626-2:2008-09 andDIN EN 626-2Corrigendum1:2009

5、-02www.beuth.deDocument comprises 16 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.04.16 DIN EN ISO 14123-2:2016-05 2 A comma is used as the decimal marker. Start of application The start of application of this standard is 20

6、16-05-01. National foreword This standard includes safety requirements within the meaning of the 9. Verordnung zum Produktsicherheitsgesetz (ProdSG) (Ninth Ordinance to the German Product Safety Act) and in connection with European legislation (New Approach Machinery Directive). This document (EN IS

7、O 14123-2:2015) has been prepared by Technical Committee ISO/TC 199 “Safety of machinery” in collaboration with Technical Committee CEN/TC 114 “Safety of machinery”. Both secretariats are held by DIN, Germany. The responsible German body involved in its preparation was DIN-Normenausschuss Sicherheit

8、stechnische Grundstze (DIN Standards Committee Safety Design Principles), Working Committee NA 095-03-01 AA Messstrategien und Anforderungen an Messverfahren. This standard contains specifications giving detail to the essential requirements set out in Annex I of the “Machinery Directive”, Directive

9、2006/42/EC, and which apply to machines emitting hazardous substances, that are either first placed on the market or commissioned within the EEA. This standard serves to facilitate proof of compliance with the essential requirements of that directive. The DIN Standards corresponding to the Internati

10、onal Standards referred to in this document are as follows: ISO 12100:2010 DIN EN ISO 12100:2011-03 ISO 14123-1 DIN EN ISO 14123-1 ISO 29042 (all parts) DIN EN 1093 (all parts) Amendments This standard differs from DIN EN 626-2:2008-09 and DIN EN 626-2 Corrigendum 1:2009-02 as follows: a) the main t

11、itle of the standard has been changed; b) the Introduction has been updated taking ISO Guide 78:2012 into account; c) normative and informative references have been updated; d) the terminology has been adapted to DIN EN ISO 12100; e) the former Annex ZA “Relationship between this European Standard a

12、nd the Essential Requirements of EU Directive 98/37/EC” has been deleted; f) the standard has been editorially revised. Previous editions DIN EN 626-2: 1996-08, 2008-09 DIN EN 626-2 Corrigendum 1: 2009-02 DIN EN ISO 14123-2:2016-05 3 National Annex NA (informative) Bibliography DIN EN 1093 (all part

13、s), Safety of machinery Evaluation of the emission of airborne hazardous substances DIN EN ISO 12100:2011-03, Safety of machinery General principles for design Risk assessment and risk reduction (ISO 12100:2010) DIN EN ISO 14123-1, Safety of machinery Reduction of risks to health resulting from haza

14、rdous substances emitted by machinery Part 1: Principles and specifications for machinery manufacturers ISO Guide 78:2012, Safety of machinery Rules for drafting and presentation of safety standards DIN EN ISO 14123-2:2016-05 4 This page is intentionally blank EUROPEAN STANDARD NORME EUROPENNE EUROP

15、ISCHE NORM EN ISO 14123-2 December 2015 ICS 13.110 Supersedes EN 626-2:1996+A1:2008English Version Safety of machinery - Reduction of risks to health resulting from hazardous substances emitted by machinery - Part 2: Methodology leading to verification procedures(ISO 14123-2:2015) Scurit des machine

16、s - Rduction des risques pour la sant rsultant de substances dangereuses mises par des machines - Partie 2: Mthodologie menant des procdures de vrification (ISO 14123-2:2015) Sicherheit von Maschinen - Minderung von Gesundheitsrisiken, die auf Gefahrstoffemissionen von Maschinen zurckzufhren sind -

17、Teil 2: Methodik beim Aufstellen von berprfungsverfahren(ISO 14123-2:2015) This European Standard was approved by CEN on 10 October 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a nationa

18、l standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A versio

19、n in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Cze

20、ch Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. E

21、UROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 14123-2:2

22、015 EEuropean foreword 3Introduction 51 Scope . 62 Normative references 63 Terms and definitions . 64 Methodology . 64.1 General . 64.2 Identification of hazardous substances . 64.3 Characterization of emissions 74.4 Identification of critical factors 74.5 Specification of indicative parameters . 75

23、 Verification .7Annex A (normative) Flow diagram of steps leading to verification procedure .8Annex B (informative) Examples of types of emission and how to assess them .9Annex C (informative) Examples of relevant factors and their indicative parameters . 10Bibliography . 12Contents PageAnnex ZA Rel

24、ationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC 11 (informative).2DIN EN ISO 14123-2:2016-05 EN ISO 14123-2:2015 (E) Foreword 4European foreword This document (EN ISO 14123-2:2015) has been prepared by Technical Committee ISO/TC 199 “Safety of machi

25、nery“ in collaboration with Technical Committee CEN/TC 114 “Safety of machinery” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting

26、 national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document super

27、sedes EN 626-2:1996+A1:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral

28、part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of

29、 Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 14123-2:2015 has been approve

30、d by CEN as EN ISO 14123-2:2015 without any modification. DIN EN ISO 14123-2:2016-05 EN ISO 14123-2:2015 (E) 3 ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is

31、 normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part

32、 in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particula

33、r the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this d

34、ocument may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso

35、.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the WTO

36、 principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 199, Safety of machinery.This second edition cancels and replaces the first edition (ISO 14123-2:1998), of which, by taking ISO 12100

37、into account, it constitutes a minor revision.ISO 14123 consists of the following parts, under the general title Safety of machinery Reduction of risks to health resulting from hazardous substances emitted by machinery: Part 1: Principles and specifications for machinery manufacturers Part 2: Method

38、ology leading to verification proceduresDIN EN ISO 14123-2:2016-05 EN ISO 14123-2:2015 (E) 4 IntroductionThe structure of safety standards in the field of machinery is as follows:a) type-A standards (basic safety standards) giving basic concepts, principles for design, and general aspects that can b

39、e applied to machinery;b) type-B standards (generic safety standards) dealing with one safety aspect or one type of safeguard that can be used across a wide range of machinery: type-B1 standards on particular safety aspects (for example, safety distances, surface temperature, noise); type-B2 standar

40、ds on safeguards (for example, two-hand controls, interlocking devices, pressure-sensitive devices, guards);c) type-C standards (machine safety standards) dealing with detailed safety requirements for a particular machine or group of machines.This document is a type-B1 standard as stated in ISO 1210

41、0. Its primary purpose is to give guidance to the writers of type-C standards when machines are identified as emitting hazardous substances as a significant risk. This part of ISO 14123 can also be used as guidance in controlling the risk where there is no type-C standard for a particular machine.Th

42、is part of ISO 14123 also provides type-C standard writers with guidance to enable the development of procedures relating to verification. Such procedures are required to take account of the health risks associated with the emission of hazardous substances in all phases of the machine life cycle (se

43、e ISO 12100:2010, 5.4 and ISO 14123-1:2015, Clause 4).This part of ISO 14123 can also be used to assist designers and manufacturers to identify sources of emission that can subsequently affect the exposure of operators and others.This document is of relevance, in particular, for the following stakeh

44、older groups representing the market players with regard to machinery safety: machine manufacturers (small, medium and large enterprises); health and safety bodies (regulators, accident prevention organizations, market surveillance etc.);Others can be affected by the level of machinery safety achiev

45、ed with the means of the document by the above-mentioned stakeholder groups: machine users/employers (small, medium and large enterprises); machine users/employees (e.g. trade unions, organizations for people with special needs); service providers, e.g. for maintenance (small, medium and large enter

46、prises); consumers (in case of machinery intended for use by consumers).The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document.The requirements of this document can be supplemented or modified by a type-C standard.For machines t

47、hat are covered by the scope of a type-C standard and that have been designed and built according to the requirements of that standard, the requirements of that type-C standard take precedence.DIN EN ISO 14123-2:2016-05 EN ISO 14123-2:2015 (E) 5 1 ScopeThis part of ISO 14123 establishes a methodolog

48、y that leads to the selection of critical factors relating to emissions of hazardous substances for the purpose of specifying suitable verification procedures.This part of ISO 14123 is intended to be used in conjunction with ISO 14123-1 and relates specifically to ISO 14123-1:2015, Clause 8.2 Normative referencesThe following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For