DIN EN 62453-303-2-2010 Field device tool (FDT) interface specification - Part 303-2 Communication profile integration - IEC 61784 CP 3 4 CP 3 5 and CP 3 6 (IEC 62453-303-2 2009) E.pdf

《DIN EN 62453-303-2-2010 Field device tool (FDT) interface specification - Part 303-2 Communication profile integration - IEC 61784 CP 3 4 CP 3 5 and CP 3 6 (IEC 62453-303-2 2009) E.pdf》由会员分享，可在线阅读，更多相关《DIN EN 62453-303-2-2010 Field device tool (FDT) interface specification - Part 303-2 Communication profile integration - IEC 61784 CP 3 4 CP 3 5 and CP 3 6 (IEC 62453-303-2 2009) E.pdf（34页珍藏版）》请在麦多课文档分享上搜索。

1、Februar 2010DEUTSCHE NORM DKE Deutsche Kommission Elektrotechnik Elektronik Informationstechnik im DIN und VDEPreisgruppe 18DIN Deutsches Institut fr Normung e.V. Jede Art der Vervielfltigung, auch auszugsweise, nur mit Genehmigung des DIN Deutsches Institut fr Normung e.V., Berlin, gestattet.ICS 35

2、.160; 35.240.50!$=G“1562636www.din.deDDIN EN 62453-303-2Field Device Tool (FDT)-Schnittstellenspezifikation Teil 303-2: Integration von Kommunikationsprofilen Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC 61784(IEC 62453-303-2:2009);Englische Fassung EN 62453-303-2:2009Field device tool (FDT)

3、 interface specification Part 303-2: Communication profile integration IEC 61784 CP 3/4, CP 3/5 and CP 3/6 (IEC 62453-303-2:2009);English version EN 62453-303-2:2009Spcification des interfaces des outils des dispositifs de terrain (FDT) Partie 303-2: Intgration des profils de communication CEI 61784

4、 CP 3/4, CP 3/5 et CP 3/6 (CEI 62453-303-2:2009);Version anglaise EN 62453-303-2:2009Alleinverkauf der Normen durch Beuth Verlag GmbH, 10772 Berlin www.beuth.deGesamtumfang 34 SeitenDIN EN 62453-303-2:2010-02 2 Beginn der Gltigkeit Die von CENELEC am 2009-08-01 angenommene EN 62453-303-2 gilt als DI

5、N-Norm ab 2010-02-01. Nationales Vorwort Vorausgegangener Norm-Entwurf: E DIN IEC 62453-303-2:2008-02. Fr diese Norm ist das nationale Arbeitsgremium K 956 Feldbus“ der DKE Deutsche Kommission Elektrotechnik Elektronik Informationstechnik im DIN und VDE (www.dke.de) zustndig. Die enthaltene IEC-Publ

6、ikation wurde vom SC 65E System: engineering and management“ erarbeitet. Das IEC-Komitee hat entschieden, dass der Inhalt dieser Publikation bis zu dem Datum (maintenance result date) unverndert bleiben soll, das auf der IEC-Website unter http:/webstore.iec.ch“ zu dieser Publikation angegeben ist. Z

7、u diesem Zeitpunkt wird entsprechend der Entscheidung des Komitees die Publikation besttigt, zurckgezogen, durch eine Folgeausgabe ersetzt oder gendert. Diese Norm enthlt eine Schnittstellenfestlegung fr Entwickler von FDT-Programmbausteinen, um Datenzugriff und Programmablauf in einer Client-Server

8、-Architektur zu entwerfen. Das vorliegende Schriftstck beschreibt die Integration des Profinet-I/O-Protokolls (DIN EN 61158-x-10) in die FDT-Spezifika-tionen nach DIN EN 62453-2. Da sich die Benutzer der vorliegenden Norm der englischen Sprache als Fachsprache bedienen, wird die Englische Fassung de

9、r EN 62453-303-2 verffentlicht. Fr die meisten der verwendeten Begriffe existieren keine gebruchlichen deutschen Benennungen, da sich die deutschen Anwender in der Regel ebenfalls der englischen Benennungen bedienen. Diese Norm steht nicht in unmittelbarem Zusammenhang mit Rechtsvorschriften und ist

10、 nicht als Sicherheitsnorm anzusehen. Das Prsidium des DIN hat mit Prsidialbeschluss 1/2004 festgelegt, dass DIN-Normen, deren Inhalt sich auf internationale Arbeitsergebnisse der Informationsverarbeitung grndet, unter bestimmten Bedingungen allein in englischer Sprache verffentlicht werden drfen. D

11、iese Bedingungen sind fr die vorliegende Norm erfllt. Fr den Fall einer undatierten Verweisung im normativen Text (Verweisung auf eine Norm ohne Angabe des Ausgabedatums und ohne Hinweis auf eine Abschnittsnummer, eine Tabelle, ein Bild usw.) bezieht sich die Verweisung auf die jeweils neueste gltig

12、e Ausgabe der in Bezug genommenen Norm. Fr den Fall einer datierten Verweisung im normativen Text bezieht sich die Verweisung immer auf die in Bezug genommene Ausgabe der Norm. Der Zusammenhang der zitierten Normen mit den entsprechenden Deutschen Normen ergibt sich, soweit ein Zusammenhang besteht,

13、 grundstzlich ber die Nummer der entsprechenden IEC-Publikation. Beispiel: IEC 60068 ist als EN 60068 als Europische Norm durch CENELEC bernommen und als DIN EN 60068 ins Deutsche Normenwerk aufgenommen. EUROPEAN STANDARD EN 62453-303-2 NORME EUROPENNE EUROPISCHE NORM October 2009 CENELEC European C

14、ommittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELE

15、C members. Ref. No. EN 62453-303-2:2009 E ICS 25.040.40; 35.100.05; 35.110 English version Field device tool (FDT) interface specification Part 303-2: Communication profile integration IEC 61784 CP 3/4, CP 3/5 and CP 3/6 (IEC 62453-303-2:2009) Spcification des interfaces des outils des dispositifs d

16、e terrain (FDT) Partie 303-2: Intgration des profils de communication CEI 61784 CP 3/4, CP 3/5 et CP 3/6 (CEI 62453-303-2:2009) Field Device Tool (FDT)-Schnittstellenspezifikation Teil 303-2: Integration von Kommunikationsprofilen Kommunikationsprofile (CP) 3/4, 3/5 und 3/6 nach IEC 61784 (IEC 62453

17、-303-2:2009) This European Standard was approved by CENELEC on 2009-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bib

18、liographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibil

19、ity of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Gree

20、ce, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 62453-303-2:2010-02 EN 62453-303-2:2009 2 Foreword The text of document 65E/128/FDIS, future e

21、dition 1 of IEC 62453-303-2, prepared by SC 65E, Devices and integration in enterprise systems, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62453-303-2 on 2009-08-01. Each part of the EN 62453-

22、3xy series is intended to be read in conjunction with EN 62453-2. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-05-01 latest date by which the national standards confli

23、cting with the EN have to be withdrawn (dow) 2012-08-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62453-303-2:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the followi

24、ng note has to be added for the standard indicated: IEC 61158 NOTE Harmonized in EN 61158 series (not modified). _ DIN EN 62453-303-2:2010-02 EN 62453-303-2:2009 3 CONTENTS INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms, definitions, symbols, abbreviated terms and conventions 6 3.1 Terms

25、 and definitions 6 3.2 Abbreviated terms .7 3.3 Conventions 7 3.3.1 Data type names and references to data types 7 3.3.2 Vocabulary for requirements7 3.3.3 Use of UML .7 4 Bus category 7 5 Access instance and device data8 5.1 Process Channel objects provided by DTM8 5.2 DTM services to access instan

26、ce and device data .8 6 Protocol specific behavior.8 7 Protocol specific usage of general data types.8 8 Protocol specific common data types10 9 Network management data types10 9.1 General .10 9.2 Parameter access data types 10 10 Communication data types .16 11 Channel parameter data types19 12 Dev

27、ice identification .22 12.1 Protocol specific handling of data type STRING 22 12.2 Device type identification data types .22 12.3 Topology scan data types25 12.4 Scan identification data types26 12.5 Device type identification data types .28 Bibliography31 Annex ZA (normative) Normative references t

28、o international publications with their corresponding European publications 32 Figure 1 Part 303-2 of the IEC 62453 series 5 Table 1 Protocol identifier 7 Table 2 Physical layer identifier .7 Table 3 Protocol specific usage of general data types8 Table 4 Simple parameter access data types .10 Table

29、5 Structured parameter access data types13 Table 6 Simple communication data types .16 Table 7 Structured communication data types17 Table 8 Simple channel parameter data types20 Table 9 Structured channel parameter data types 21 DIN EN 62453-303-2:2010-02 EN 62453-303-2:2009 4 Table 10 Identificati

30、on data types for PROFINET with pure DCP23 Table 11 Identification data types for PROFINET with I NetworkManagementInfoWrite service. 9.2 Parameter access data types The data types describe the parameter information of an IEC 61784 CP 3/4, CP 3/5 and CP 3/6 device (see Table 4 and Table 5) Table 4 S

31、imple parameter access data types Data type Definition Description arType UINT ARType according to the PROFINET specification Shall only be set by Parent arProperties UDINT ARProperties according to the PROFINET specification Shall only be set by Parent arUUID UUID ARUUID according to the PROFINET s

32、pecification Shall only be set by Parent alarmCRType UINT AlarmCRType according to the PROFINET specification Shall only be set by Parent alarmCRProperties UDINT AlarmCRProperties according to the PROFINET specification Shall only be set by Parent rtaTimeoutFactor UINT RTATimeoutFactor according to

33、the PROFINET specification Shall only be set by Parent rtaRetries UINT RTARetries according to the PROFINET specification Shall only be set by Parent localAlarmReference UINT LocalAlarmReference according to the PROFINET specification Shall only be set by Parent maxAlarmDataLength UINT MaxAlarmDataL

34、ength according to the PROFINET specification Shall only be set by Parent infoText STRING Additional textual information Shall only be set by DTM localIndex UINT The attribute used within Device/Identification to address the device instance. Shall only be set by DTM nameOfStation STRING The station

35、name is the primary address. The default value is the DNS_CompatibleName of the GSDML. The Parent shall configure the station name according to the rules defined by the DNS_CompatibleName. Shall only be set by Parent apart of the default value, which shall be set by DTM (during InitNew) DIN EN 62453

36、-303-2:2010-02 EN 62453-303-2:2009 11 Data type Definition Description dynIpAddress BOOL The attribute indicates whether the IP address is dynamically assigned to the device. Shall only be set by Parent extAddrSupported BOOL Extended address assignment (e.g. by DHCP, BootP) is supported by the Profi

37、net IO Device. Shall only be set by DTM ipAddress STRING The attribute contains the IP address that is assigned to the device. The IP address is a secondary address. The default value is “0.0.0.0”. Shall only be set by Parent ipSubnetMask STRING The attribute contains the subnet mask. The default va

38、lue is “255.255.255.255”. Shall only be set by Parent ipDefaultGateway STRING The attribute contains the default gateway address. The default value is an empty string. Shall only be set by Parent macAddress STRING The attribute contains the MAC address of the device. The MAC address is a secondary a

39、ddress. The macAddress attribute is of type string and shall be used with format shown in the example: Example: 00:A0:45:01:02:03 Shall only be set by Parent slotNumber UINT The slot address that is used by the module Shall be set by DTM during configuration. Can be set by Parent during topology sca

40、n moduleIdentNumber UDINT The ModuleIdentNumber according to the PROFINET specification Shall be set by DTM during configuration. Can be set by Parent during topology scan moduleProperties UINT This attribute is reserved for future use according to the PROFINET specification subSlotNumber UINT The s

41、ubslot address that is used by the submodule. Shall be set by DTM during configuration. Can be set by Parent during topology scan subModuleIdentNumber UDINT The SubmoduleIdentNumber according to the PROFINET specification. Shall be set by DTM during configuration. Can be set by Parent during topolog

42、y scan ioType enumeration (Input | Output | InputAndOutput ) Allowed values are: Input, Output, InputAndOutput. Values and meaning according to the PROFINET specification SubmoduleProperties.Type. Shall be set by DTM during configuration. Can be set by Parent during topology scan sharedInput enumera

43、tion (IOController | IOControllerShare ) Allowed values are: IOController, IOControllerShare. Values and meaning according to the PROFINET specification SubmoduleProperties.SharedInput. Shall be set by DTM during configuration. Can be set by Parent during topology scan reduceInputSubmodule DataLengt

44、h enumeration (Expected | Zero) Allowed values are: Expected, Zero. Values and meaning according to the PROFINET specification SubmoduleProperties.ReduceInputSubmoduleDataLength. Shall be set by DTM during configuration. Can be set by Parent during topology scan DIN EN 62453-303-2:2010-02 EN 62453-3

45、03-2:2009 12 Data type Definition Description reduceOutputSubmodule DataLength enumeration (Expected | Zero ) Allowed values are: Expected, Zero. Values and meaning according PROFINET specification SubmoduleProperties.ReduceOutputSubmoduleDataLength. Shall be set by DTM during configuration. Can be

46、set by Parent during topology scan discardIOXS enumeration (Expected | Zero ) Allowed values are: Expected, Zero. Values and meaning according PROFINET specification -SubmoduleProperties.DiscardIOXS. Shall be set by DTM during configuration. Can be set by Parent during topology scan api UDINT The AP

47、I according to the PROFINET specification. Shall be set by DTM during configuration. Can be set by Parent during topology scan index UINT The address of the desired record data object. Shall only be set by DTM recordData ARRAY OF USINT The binary data that will be written to the submodule during sta

48、rtup or connect. The record data implicitly contain the record data length. Shall only be set by DTM consistency enumeration (itemConsistency | allItemsConsistency ) The consistency of the input data. Shall only be set by DTM during configuration sendClockFactor UINT SendClockFactor according to the

49、 PROFINET specification. Shall only be set by Parent, if the attribute belongs to the element SubModule. Shall only be set by DTM, if the attribute belongs to the element SendClockFactor reductionRatio UINT ReductionRatio according to the PROFINET specification. Shall only be set by Parent, if the attribute belongs to the element SubModule. Shall only be set by DTM, if the attribute belongs to the element ReductionRatio watchdogFactor UINT WatchdogFactor accor