DIN EN 615-2009 Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders) English version of DIN EN 615 2009-08《防火 灭火介质 粉末规范(D级粉末除外) 英文版本.pdf

《DIN EN 615-2009 Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders) English version of DIN EN 615 2009-08《防火 灭火介质 粉末规范(D级粉末除外) 英文版本.pdf》由会员分享，可在线阅读，更多相关《DIN EN 615-2009 Fire protection - Fire extinguishing media - Specifications for powders (other than class D powders) English version of DIN EN 615 2009-08《防火 灭火介质 粉末规范(D级粉末除外) 英文版本.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、August 2009DEUTSCHE NORM English price group 14No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 13.220.10!$Xf“1539467ww

2、w.din.deDDIN EN 615Fire protection Fire extinguishing media Specifications for powders (other than class D powders)English version of DIN EN 615:2009-08Brandschutz Lschmittel Anforderungen an Lschpulver (nicht fr Lschpulver der Brandklasse D)Englische Fassung DIN EN 615:2009-08SupersedesDIN EN 615:2

3、002-03 andDIN EN 615 Corrigendum1:2006-08www.beuth.deDocument comprises pages36DIN EN 615:2009-08 National foreword This standard has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparati

4、on was the Normenausschuss Feuerwehrwesen (Firefighting and Fire Protection Standards Committee), Technical Committee NA 031-03-01 AA Feuerlsch-mittel. The responsible German standards committee considers it necessary to make the following references to laws, regulations and technical rules regardin

5、g the protection of humans and the environment against adverse effects when using, processing and producing fire extinguishing powders: a) This European Standard requires that, under normal conditions of use, the materials and additives used to produce powders are to be non-toxic to humans. b) Accor

6、ding to the Kreislaufwirtschaftsgesetz (KrW-/AbfG) (German Recycling Management Act), it is no longer permissible to dispose of ABC powder residues (i.e. fire extinguisher contents that are no longer usable) which are exchanged during maintenance and servicing, because it is possible to recycle thes

7、e residues, e.g. as additives in soil improvers. To ensure that powder residues can be recycled, the heavy metal content of fire extinguishing powder residues and powders shall not exceed the defined limits. The DIN Standard corresponding to the International Standard referred to in the EN is as fol

8、lows: ISO 3310-1 DIN ISO 3310-1 Amendments This standard differs from DIN EN 615:2002-03 and DIN EN 615 Corrigendum 1:2006-08 as follows: a) Information regarding performance tests for establishing conformity to EN 3 has been given in more detail (clause 9 and Annex J). b) Annex K “Suggested test me

9、thod for testing the compatibility of powder with foam” has been added. c) A bibliography has been added. d) The standard has been editorially revised. Previous editions DIN EN 615: 1995-02, 2002-03 DIN EN 615 Corrigendum 1: 2006-08 2 DIN EN 615:2009-08 National Annex NA (informative) Bibliography D

10、IN ISO 3310-1, Test sieves Technical requirements and testing Part 1: Test sieves of metal wire cloth ChemG, Gesetz zum Schutz vor gefhrlichen Stoffen (Chemikaliengesetz ChemG) (Act on Protection against Hazardous Substances (Chemicals Act) KrW/AbfG, Gesetz zur Vermeidung, Verwertung und Beseitigung

11、 von Abfllen; Artikel 1 Gesetz zur Frderung der Kreislaufwirtschaft und Sicherung der umweltvertrglichen Beseitigung von Abfllen (Kreislaufwirtschafts- und Abfallgesetz KrW-/AbfG) (Act for Promoting Closed Substance Cycle Waste Management and Ensuring Environmentally Compatible Waste Disposal) 3 DIN

12、 EN 615:2009-08 4 This page is intentionally blank EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 615April 2009ICS 13.220.10 Supersedes EN 615:1994 English VersionFire protection - Fire extinguishing media - Specifications forpowders (other than class D powders)Protection contre lincendie - Agent

13、 extincteurs -Prescriptions pour les poudres (autres que les poudrespour classe D)Brandschutz - Lschmittel - Anforderungen an Lschpulver(nicht fr Lschpulver der Brandklasse D)This European Standard was approved by CEN on 12 March 2009.CEN members are bound to comply with the CEN/CENELEC Internal Reg

14、ulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This E

15、uropean Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the na

16、tional standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

17、United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 615:2009: EEN

18、615:2009 (E) 2 Contents Page Foreword 4 1 Scope 5 2 Normative references 5 3 Definitions 5 4 Sampling .6 5 Bulk density 6 6 Sieve analysis 6 7 Chemical content .6 8 Fire test performance 7 8.1 General 7 8.2 Class A powders 7 8.3 Class B powders 7 8.4 Class C powders 7 9 Residual mass after discharge

19、 .8 10 Resistance to caking and lumping .8 11 Water repellency 8 12 Moisture content 8 13 Marking and packaging .8 14 Suppliers data sheet .9 Annex A (normative) Test method for determination of bulk density 10 A.1 Apparatus 10 A.2 Procedure 10 Annex B (normative) Test methods for sieve analysis 11

20、B.1 Method 1 11 B.2 Method 2 11 Annex C (normative) Test method for resistance to caking and lumping . 13 C.1 Apparatus 13 C.2 Procedure 13 Annex D (normative) Test method for water repellency 14 D.1 Apparatus 14 D.2 Procedure 14 Annex E (normative) Test method for moisture content 15 E.1 Apparatus

21、15 E.2 Procedure 15 Annex F (informative) Suggested method of sampling 16 Annex G (informative) Laser diffraction particle size analysis 17 Annex H (informative) Compatibility between extinguishing powders and foams . 18 Annex I (informative) Suitability and equivalence of extinguishing powders in e

22、quipment 19 Annex J (informative) Suggested test method for effective discharge time 20 DIN EN 615:2009-08 EN 615:2009 (E) 3 J.1 Principle 20 J.2 Apparatus . 20 J.3 Procedure . 20 J.4 Expression of results 20 Annex K (informative) Suggested test method for testing the compatibility of powder with fo

23、am . 21 K.1 General . 21 K.2 Apparatus . 21 K.3 Test procedure . 22 Bibliography 32 DIN EN 615:2009-08 EN 615:2009 (E) 4 Foreword This document (EN 615:2009) has been prepared by Technical Committee CEN/TC 191 “Fixed firefighting systems”, the secretariat of which is held by BSI. This European Stand

24、ard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2009, and conflicting national standards shall be withdrawn at the latest by October 2009. Attention is drawn to the possibility that some of the elements of t

25、his document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 615:1994. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries a

26、re bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swe

27、den, Switzerland and the United Kingdom. DIN EN 615:2009-08 EN 615:2009 (E) 5 1 Scope This European Standard is applicable to fire extinguishing powders for fire classes A, B and C. It specifies, by means of defined test methods, minimum requirements for the chemical and physical properties and mini

28、mum extinguishing capabilities. Requirements are also specified for the information and data to be given by the supplier. This European Standard is not applicable to powders for class D fires. NOTE 1 The classification of fires is given in EN 2 1. NOTE 2 Some countries have national standards for cl

29、ass D powders. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 3 (all p

30、arts), Portable fire extinguishers EN ISO 4788, Laboratory glassware - Graduated measuring cylinders (ISO 4788:2005) ISO 3310-1, Test sieves - Technical requirements and testing - Part 1: Test sieves of metal wire cloth 3 Definitions 3.1 (extinguishing) powder extinguishing medium composed of finely

31、 divided solid chemical products consisting of one or more principal components which are combined with additives to improve its characteristics NOTE 1 In North America and some other countries, the term “dry powder“ is used to denote special metal fire extinguishing agents and the term “dry chemica

32、l extinguishing agent“ is used to denote the extinguishing medium specified in the European Standard. NOTE 2 When it is useful to indicate the class of fire for which a powder is designed, capital letters may be added before the term. The letters used in this European Standard are those defined in E

33、N 2 1. EXAMPLE BC powder is designed to extinguish class B (liquids or liquefiable solids) and class C (gases) fires; ABC powder is designed to extinguish class A (solids which form glowing embers), class B and class C fires. 3.2 batch single charge of powder in the processing equipment that has bee

34、n made homogeneous by subjection to the same unit and physical processing 3.3 lot one or more batches, but not more than 25 t of powder, manufactured to the same formulation by the same manufacturing process and under the same environmental conditions NOTE Any substantial change in manufacturing pro

35、cess, source of raw materials, or change in environmental conditions may justify identifying the material as a different lot. DIN EN 615:2009-08 EN 615:2009 (E) 6 3.4 characteristic value value declared by the supplier for the chemical and physical properties of the powder 3.5 supplier party e.g. ma

36、nufacturer, distributor, importer, responsible for the powder and able to ensure that quality assurance is exercised 4 Sampling 4.1 Samples for testing shall be taken using a method which will provide a representative sample. In order to avoid any risk of condensation, it is essential that the tempe

37、rature of the powder in its original container is not lower than the ambient air temperature when the sample is being taken. 4.2 Samples shall be stored in individual, clean, dry, airtight, non-reactive and suitably identified containers. 4.3 Sample containers should not be opened until temperature

38、equilibrium with the laboratory has been reached. NOTE 1 One suitable method of sampling is suggested in Annex F. NOTE 2 Unless otherwise specified, all tests on samples are carried out at (20 5) C. 5 Bulk density The bulk density shall be within 0,07 g/ml of the characteristic value when tested in

39、accordance with Annex A. 6 Sieve analysis The cumulative percentages oversize on the 40 m sieve and on the 63 m sieve shall not differ from the characteristic values by more than 8 % of the total mass of the sample, and the cumulative percentage oversize on the 125 m sieve shall not differ from the

40、characteristic value by more than 5 % of the total mass of the sample when the powder is tested in accordance with one of the methods of Annex B. NOTE 1 Annex G describes one of the methods of analysis technique which gives more detailed information on particle size. NOTE 2 The two methods described

41、 in Annex B may give differing results. The method used should therefore be given in the results. 7 Chemical content Characteristic values for chemical content shall be expressed as percentages (m/m) of the total content. The characteristic values for chemical content shall include all constituents

42、present in the powder at a concentration representing 10 % or more of the total content. The sum of the characteristic values for chemical content shall be 90 % or more of the total content. Each constituent given a characteristic value shall be identified by its chemical name, or as the reaction pr

43、oduct of a chemical process between reactants identified by their chemical names. In the latter case, the chemical process shall be specified, for example by reference to a published patent. DIN EN 615:2009-08 EN 615:2009 (E) 7 The content of a declared constituent shall be as follows: a) within 1,0

44、 % of the total chemical content for constituents of characteristic value more than 10 % but not more than 15 %; b) within 1,5 % of the total chemical content for constituents of characteristic value more than 15 % but not more than 25 %; c) within 2,0 % of the total chemical content for constituent

45、s of characteristic value more than 25 % but not more than 65 %; d) within 3,0 % of the total chemical content for constituents of characteristic value more than 65 % and above. NOTE 1 For example, a constituent with a characteristic value of 20 % has tolerance limits of 18,5 % and 21,5 % and a cons

46、tituent with a characteristic value of 80 % has tolerance limits of 77 % and 83 %. NOTE 2 WARNING It is important that under normal conditions of use the various materials and additives used to produce powders be generally recognized as being non-toxic to humans. In some countries there may be a leg

47、al obligation to disclose to designated authorities the complete chemical content, and any proposed changes of chemical content, with documented details of non-toxicity. NOTE 3 The compatibility of the powder with foam (see Annex H) depends on chemical content. The test described in Annex K may allo

48、w a determination of foam/powder compatibility to be made. NOTE 4 WARNING The mixing of different types of powder (ABC and BC) may result in caking, and the production of gas which will increase pressure in the container to an unsafe level. Such increases in pressure have been known to cause contain

49、ers to rupture, and to cause bodily injury and damage. NOTE 5 WARNING Recovered powder may have been previously contaminated, and may have absorbed moisture. If it is then recycled, the powder may eventually become lumpy, and interrupt the flow of powder when used on a fire. 8 Fire test performance 8.1 General A 6 kg or 9 kg stored pressure or cartridge extinguisher may be used to test conformity to this clause, but the same model of extinguisher shall be used for class A rating (if applicable), class B rating and to test