DIN EN 1730-2013 Furniture Tables Test methods for the determination of stability strength and durability German version EN 1730 2012《家具 桌子 强度 耐久性和稳定性测定的试验方法 德文版本EN 1730-2012》.pdf

《DIN EN 1730-2013 Furniture Tables Test methods for the determination of stability strength and durability German version EN 1730 2012《家具 桌子 强度 耐久性和稳定性测定的试验方法 德文版本EN 1730-2012》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1730-2013 Furniture Tables Test methods for the determination of stability strength and durability German version EN 1730 2012《家具 桌子 强度 耐久性和稳定性测定的试验方法 德文版本EN 1730-2012》.pdf（33页珍藏版）》请在麦多课文档分享上搜索。

1、January 2013 Translation by DIN-Sprachendienst.English price group 13No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).IC

2、S 97.140!$gG“1936836www.din.deDDIN EN 1730Furniture Tables Test methods for the determination of stability, strength and durability;English version EN 1730:2012,English translation of DIN EN 1730:2013-01Mbel Tische Prfverfahren zur Bestimmung der Standsicherheit, Festigkeit und Dauerhaltbarkeit;Engl

3、ische Fassung EN 1730:2012,Englische bersetzung von DIN EN 1730:2013-01Ameublement Tables Mthodes dessais pour la dtermination de la stabilit, de la rsistance et de la durabilit;Version anglaise EN 1730:2012,Traduction anglaise de DIN EN 1730:2013-01SupersedesDIN EN 1730:2000-08www.beuth.deDocument

4、comprises 33 pagesIn case of doubt, the German-language original shall be considered authoritative.01.13 DIN EN 1730:2013-01 2 A comma is used as the decimal marker. National foreword This document (EN 1730:2012) has been prepared by Technical Committee CEN/TC 207 “Furniture”, (Secretariat: UNI, Ita

5、ly). The responsible German body involved in its preparation was the Normenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), NA 042-05 FBR Fachbereichsbeirat Mbel (Furniture Section Steering Committee). The DIN Standard corresponding to the International Standard referred

6、 to in this document is as follows: ISO 7619-2 DIN ISO 7619-2 Amendments This standard differs from DIN EN 1730:2000-08 as follows: a) the standard has been revised in form and substance; b) the title and the scope of the standard have been extended to include not only domestic furniture, but all ty

7、pes of tables, viz. for office, school and contract use; c) vertical static load tests have been extended; d) horizontal durability and stiffness tests have been extended; e) testing of the deflection of table tops has been supplemented; f) testing of the durability of tables with castors has been s

8、upplemented; g) stability tests have been extended; h) stability tests for tables with extension elements have been supplemented; i) stability tests for tables designed to support a parasol have been supplemented; j) testing of height adjustment mechanisms has been supplemented; k) the standard has

9、been editorially revised. Previous editions DIN EN 1730: 2000-08 DIN EN 1730:2013-01 3 National Annex NA (informative) Bibliography DIN ISO 7619-2, Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method DIN EN 1730:2013-01 4 This page is intentiona

10、lly blank EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1730 October 2012 ICS 97.140 Supersedes EN 1730:2000English Version Furniture - Tables - Test methods for the determination of stability, strength and durability Ameublement - Tables - Mthodes dessai pour la dtermination de la stabilit,

11、de la rsistance et de la durabilit Mbel - Tische - Prfverfahren zur Bestimmung der Standsicherheit, Festigkeit und Dauerhaltbarkeit This European Standard was approved by CEN on 18 August 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions f

12、or giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in thr

13、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bo

14、dies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,

15、Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN

16、 national Members. Ref. No. EN 1730:2012: EEN 1730:2012 (E) 2 Contents Page Foreword 31 Scope 42 Normative references 43 Terms and definitions .44 General test conditions .54.1 Preliminary preparation 54.2 Application of forces .54.3 Tolerances 55 Test Equipment and Apparatus 56 Test Procedures - St

17、rength and durability 86.1 General 86.2 Horizontal static load test .86.3 Vertical static load tests . 146.3.1 Vertical static load on main surface . 146.3.2 Additional vertical static load test where the main surface has a length 1 600 mm 156.3.3 Vertical static load on ancillary surface . 166.4 Ho

18、rizontal durability and stiffness test 176.4.1 General . 176.4.2 Horizontal durability test 176.4.3 Stiffness of the structure . 216.5 Vertical durability test 236.6 Vertical impact test . 236.6.1 General . 236.6.2 Vertical impact test for glass table tops . 236.6.3 Vertical impact test for all othe

19、r table tops 236.7 Deflection of table tops 236.8 Durability of tables with castors . 246.9 Drop test 247 Test procedures Stability 257.1 General . 257.2 Stability under vertical load . 257.2.1 General . 257.2.2 Test for tables that are or can be set to a height of 950 mm or less . 257.2.3 Test for

20、tables that are or can be set to a height greater than 950 mm 277.3 Stability for tables with extension elements 277.4 Stability of tables designed to support a parasol . 278 Test procedures - Height adjustment mechanisms 288.1 General . 288.2 Durability of Height adjustment mechanisms . 28DIN EN 17

21、30:2013-01 EN 1730:2012 (E) 3 Foreword This document (EN 1730:2012) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endo

22、rsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identify

23、ing any or all such patent rights. This document supersedes EN 1730:2000. The main changes with respect to the previous edition are listed below. All test methods for seating used in European Standards for furniture have been collated in one document. The document now contains methods that were prev

24、iously listed in EN 581-3, Outdoor furniture, EN 527-3, Office Work Tables and Desks and EN 15372, Non-domestic tables. A durability test for tables with castors has been added. A durability test for height adjustment mechanisms has been added. Wherever possible test methods have been simplified and

25、 clarified for ease of use. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republ

26、ic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1730:2013-01 EN 1730:2012 (E) 4 1 Scope This Europea

27、n Standard specifies test methods for the determination of stability, strength and durability of the structure of all types of tables and desks without regard to use, materials, design/construction or manufacturing process. This European Standard does not apply to changing units which are covered by

28、 other European Standards. Test methods for the assessment of ageing, degradation, and electrical functions are not included. This European Standard does not apply to the strength and durability of any storage features that are covered by other European Standards. This European Standard does not inc

29、lude any requirements. Requirements for different end uses can be found in other Standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies

30、. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 14072:2003, Glass in furniture Test methods ISO 7619-2, Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method 3 Terms and definitions Fo

31、r the purposes of this document, the following terms and definitions apply. 3.1 structure load bearing parts of furniture such as the frame, top and legs 3.2 ancillary surface surface additional to the main surface intended for occasional use as part of the table top 3.3 duty cycle length of time th

32、e height adjustable tables drive system may be operated without impairing its useful life 3.4 levelling device device intended to keep the table top horizontal e.g. adjustable feet or similar DIN EN 1730:2013-01 EN 1730:2012 (E) 5 4 General test conditions 4.1 Preliminary preparation The furniture s

33、hall be tested as delivered. Knock-down furniture shall be assembled according to the instructions supplied with it. If the instructions allow the furniture to be assembled or combined in different ways, the most adverse combination shall be used for each test. Knock-down fittings shall be tightened

34、 before testing. Further tightening shall not take place unless specifically required by the manufacturer. Unless otherwise specified by the manufacturer, the sample for test shall be stored in indoor ambient conditions for at least 24 h immediately prior to testing. The tests shall be carried out a

35、t indoor ambient conditions but if during a test the temperature is outside the range 15 C to 25 C the maximum and/or minimum temperature shall be recorded in the test report. The test for deflection of table tops (see 6.7), except those made from metal, glass and stone, shall be carried out at a re

36、lative humidity of (50 5) % and a temperature of (23 2) C. 4.2 Application of forces The test forces in durability and static load tests shall be applied sufficiently slowly to ensure that negligible dynamic load is applied. The forces in durability tests shall be applied sufficiently slowly to ensu

37、re that kinetic heating does not occur. Unless otherwise stated, static loads shall be maintained for (10 2) s. Unless otherwise stated, durability loads shall be maintained for (2 1) s. The forces may be replaced by masses. The relationship 10 N = 1 kg shall be used. 4.3 Tolerances Unless otherwise

38、 stated, the following tolerances are applicable to the test equipment: Forces: 5 % of the nominal force; Velocities: 5 % of the nominal velocity; Masses: 1 % of the nominal mass; Dimensions: 1 mm of the nominal dimension; Angles: 2oof the nominal angle. The accuracy for the positioning of loading p

39、ads and impact plates shall be 5 mm. NOTE For the purposes of uncertainty measurement, test results are not considered to be adversely affected when the above tolerances are met. 5 Test Equipment and Apparatus Unless otherwise stated, the tests may be applied by any suitable device because the resul

40、ts are not dependent upon the apparatus, except in the case of impact tests where the apparatus described in 5.2 shall be used. The equipment shall not inhibit deformation nor cause unnatural deformation of the unit/component, i.e. it shall be able to move so that it can follow the deformation of th

41、e unit/component during testing. DIN EN 1730:2013-01 EN 1730:2012 (E) 6 With the exception of the horizontal static, durability and stiffness tests, described in 6.2 and 6.4, all loading pads shall be capable of pivoting in relation to the direction of the applied force and the pivot point shall be

42、as close as practically possible to the load surface. Loading pads for the horizontal static, durability and stiffness tests, described in 6.2 and 6.4, shall not pivot. With the exception of the horizontal static, durability and stiffness tests described in 6.2 and 6.4, if a loading pad tends to sli

43、de, use a slip resistant material between the loading pad and the surface being tested. 5.1 Vertical impactor, as shown in Figure 1 and comprised of the following: 5.1.1 Circular body, 200 mm in diameter separated from the striking surface by helical compression springs and free to move relative to

44、it on a line perpendicular to the plane of the central area of the striking surface. The body and associated parts minus the springs shall have a mass of (17 0,1) kg and the whole apparatus, including mass, springs and striking surface, shall have a mass of (25 0,1) kg. 5.1.2 Springs, which shall be

45、 such that the nominal spring rate of the combined spring system is (7 2) N/mm and the total friction resistance of the moving parts is less than 1 N. The spring system shall be compressed to an initial load of (1 040 5) N (measured statically) and the amount of spring compression movement available

46、 from the initial compression point to the point where the springs become fully closed shall be not less than 60 mm. 5.1.3 Striking surface, which shall be a rigid circular object, 200 mm in diameter, the face of which has a convex spherical curvature of 300 mm radius with a 12 mm front edge radius.

47、 DIN EN 1730:2013-01 EN 1730:2012 (E) 7 Key 1 joint of lifting device not inhibiting free fall Figure 1 Vertical Impactor 5.2 Floor, horizontal, flat and rigid with a smooth surface. For the drop test (6.9) the floor shall be faced with a 2 mm thick layer of rubber with a hardness of 85 10 IRHD acco

48、rding to ISO 7619-2. DIN EN 1730:2013-01 EN 1730:2012 (E) 8 5.3 Stops, to prevent the article from sliding but not tilting, no higher than 12 mm except in cases where the design of the item necessitates the use of higher stops, in which case the lowest that will prevent the item from moving shall be used. 5.4 Loading pad, a rigid cylindrical object, 100 mm in diameter, with a flat, smooth face and a 1