DIN EN 1729-2-2016 en 8010 Furniture - Chairs and tables for educational institutions - Part 2 Safety requirements and test methods German version EN 1729-2 2012+A1 2015《家具 教育机构用桌椅.pdf

《DIN EN 1729-2-2016 en 8010 Furniture - Chairs and tables for educational institutions - Part 2 Safety requirements and test methods German version EN 1729-2 2012+A1 2015《家具 教育机构用桌椅.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1729-2-2016 en 8010 Furniture - Chairs and tables for educational institutions - Part 2 Safety requirements and test methods German version EN 1729-2 2012+A1 2015《家具 教育机构用桌椅.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、March 2016 English price group 12No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 97.140!%Me“2429966www.din.deDIN EN

2、 1729-2Furniture Chairs and tables for educational institutions Part 2: Safety requirements and test methods;English version EN 1729-2:2012+A1:2015,English translation of DIN EN 1729-2:2016-03Mbel Sthle und Tische fr Bildungseinrichtungen Teil 2: Sicherheitstechnische Anforderungen und Prfverfahren;

3、Englische Fassung EN 1729-2:2012+A1:2015,Englische bersetzung von DIN EN 1729-2:2016-03Meubles Chaises et tables pour les tablissements denseignement Partie 2: Exigences de scurit et mthodes dessai;Version anglaise EN 1729-2:2012+A1:2015,Traduction anglaise de DIN EN 1729-2:2016-03SupersedesDIN EN 1

4、729-2:2012-04www.beuth.deDocument comprises 26 pagesDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.03.16 DIN EN 1729-2:2016-03 2 A comma is used as the decimal marker. National foreword This document (EN 1729-2:2012+A1:2015) has be

5、en prepared by Technical Committee CEN/TC 207 “Furniture”, (Secretariat: UNI, Italy). The responsible German body involved in its preparation was DIN-Normenausschuss Holzwirtschaft und Mbel (DIN Standards Committee Timber and Furniture), Working Committee NA 042-05-05 AA Anforderungen an Schulmbel,

6、SpA zu CEN/TC 207/WG 6. This standard includes safety requirements within the meaning of the Produktsicherheitsgesetz (ProdSG) (German Product Safety Act). Where this standard has been identified by the Ausschuss fr Produktsicherheit (German Committee for Product Safety) and reference to it has been

7、 published in the Gemeinsames Ministerialblatt (German Joint Ministerial Gazette) by the Bundesanstalt fr Arbeitsschutz und Arbeitsmedizin (BAuA) (German Federal Institute for Occupational Safety and Health), it is to be presumed that chairs and tables for educational institutions which comply with

8、this standard fulfil the relevant health and safety requirements. Amendments This standard differs from DIN EN 1729-2:2012-04 as follows: a) references with regard to DIN EN 1728 and DIN EN 1730 have been updated; b) Annex A (normative) “Drop test of chairs” has been deleted. Previous editions DIN V

9、 ENV 1729-2: 2001-12 DIN EN 1729-2: 2006-09, 2012-04 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 1729-2:2012+A1 December 2015 ICS 97.140 Supersedes EN 1729-2:2012English Version Furniture - Chairs and tables for educational institutions - Part 2: Safety requirements and test methods Meubles

10、 - Chaises et tables pour les tablissements denseignement - Partie 2: Exigences de scurit et mthodes dessai Mbel - Sthle und Tische fr Bildungseinrichtungen - Teil 2: Sicherheitstechnische Anforderungen und Prfverfahren This European Standard was approved by CEN on 9 December 2011 and includes Amend

11、ment 1 approved by CEN on 17 November 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

12、such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

13、own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany

14、, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NOR

15、MUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1729-2:2012+A1:2015 EEN 1729-2:2012+A1:2015 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative

16、references 5 3 General test conditions . 5 3.1 Testing ranges of chairs and tables 5 3.2 Testing of height adjustable and multi-size chairs and tables 5 3.3 Sequence of testing . 6 4 Safety requirements . 6 5 Testing of chairs 7 5.1 General 7 5.2 Stability . 8 5.2.1 General 8 5.2.2 Forward stability

17、 . 8 5.2.3 Sideways stability . 9 5.2.4 Rearwards stability . 11 5.2.5 Chairs with backrest inclination . 11 5.3 Strength and durability 12 5.3.1 General . 12 5.3.2 Seat and back static load (!EN 1728:2012, 6.4“) . 12 5.3.3 Seat and back durability (!EN 1728:2012, 6.17“) . 13 5.3.4 Seat front edge d

18、urability (!EN 1728:2012, 6.18“) . 13 5.3.5 Sideways static load (!EN 1728:2012, 6.16“) 14 5.3.6 Forward static load (!EN 1728:2012, 6.15“) . 14 5.3.7 Seat impact (!EN 1728:2012, 6.24“) . 15 5.3.8 Back impact (!EN 1728:2012, 6.25“) . 16 5.3.9 Static load of foot rail (!EN 1728:2012, 6.8“) 17 5.3.10

19、Drop test (!EN 1728:2012, 6.27.3“) 17 5.3.11 Foot !rest“ durability (!EN 1728:2012, 6.21“) 18 5.3.12 Armrest vertical static load (!EN 1728:2012, 6.11 or EN 1335-3:2009, 7.2.3“) . 18 6 Testing of tables 19 6.1 Stability 19 6.1.1 General . 19 6.1.2 Stability of tables, vertical load (!EN 1730:2012, 7

20、.2“) . 19 6.2 Strength and durability of tables 19 6.2.1 General . 19 6.2.2 Horizontal static load (!EN 1730:2012, 6.2“) . 20 6.2.3 Horizontal durability (!EN 1730:2012, 6.4.2“) 20 6.2.4 Vertical static load (!EN 1730:2012, 6.3“) . 21 6.2.5 Vertical durability (!EN 1730:2012, 6.5“) 22 7 Test report

21、22 Annex A (informative) Test method for determination of the displacement of chairs placed on tabletops 24 DIN EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 3 A.1 General . 24 A.2 Test equipment 24 A.3 Test method 24 DIN EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 4 European foreword This document

22、(EN 1729-2:2012+A1:2015) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2016, and co

23、nflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This docum

24、ent includes Amendment 1 approved by CEN on 2015-11-17. This document supersedes !EN 1729-2:2012“. The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. EN 1729 consists of the following parts under the general title “Furniture Chairs and tables for edu

25、cational institutions“: Part 1: Functional dimensions; Part 2: Safety requirements and test methods. The main changes with respect to the previous edition are listed below: a) additional consideration of swivel chairs; b) additional consideration of chairs with arm rests; c) clarification of seat lo

26、ading points and back loading points; d) amendment of some loads and forces; e) modification of !Annex A“ (informative) “Test method for determination of stability of chairs placed on tabletops“. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

27、 countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norwa

28、y, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 5 1 Scope This European Standard specifies safety requirements and test methods for chairs and tables for general educational purposes in educ

29、ational institutions. It applies to furniture for use with laptop computers or portable devices, but not to special purpose workstations, e.g. laboratories, ranked seating and workshops. !deleted text“ !The“ figures illustrate test principles only and cannot be used to carry out the tests. NOTE EN 1

30、729-1 specifies functional dimensions and marking of chairs and tables for general educational purposes. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the

31、 latest edition of the referenced document (including any amendments) applies. EN 1022:2005, Domestic furniture Seating Determination of stability EN 1335-3:2009, Office furniture Office work chair Part 3: Test methods !EN 1728:2012, Furniture Seating Test methods for the determination of strength a

32、nd durability“ EN 1729-1, Furniture Chairs and tables for educational institutions Part 1: Functional dimensions !EN 1730:2012, Furniture Tables Test methods for the determination of stability, strength and durability“ EN 13722, Furniture Assessment of the surface gloss !deleted text“ 3 General test

33、 conditions 3.1 Testing ranges of chairs and tables If chairs in a range of size marks are all manufactured with the same design details and geometry, it is only necessary to carry out the complete test programme on the highest size mark (including multi-size and height adjustable) in the range, plu

34、s additional stability tests on the smallest size mark in the range. If tables in a range of size marks are all manufactured with the same design details and geometry, it is only necessary to carry out the complete test programme on the highest size mark in the range. In the event of failure in any

35、of the chairs/tables in the above test programme, it is necessary to carry out the complete test programme on each chair/table size mark individually. 3.2 Testing of height adjustable and multi-size chairs and tables Where tables or chairs can be set to a number of different configurations the worst

36、 case configuration shall be tested. DIN EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 6 Where tables and chairs can be adjusted to suit multiple size marks the item shall be assessed in accordance with EN 1729-1 at all size marks, and structural testing shall be carried out at the highest size mark

37、only. 3.3 Sequence of testing Testing shall be carried out according to EN 1729-1 prior to testing in EN 1729-2. The tests shall be carried out in the order that the clauses are numbered in this European Standard. 4 Safety requirements In order to minimise the risk of personal injury or damage to cl

38、othing, the following requirements apply: a) edges of the seat, back rest and arm rests, which are in contact with the user when sitting in the chair shall be rounded with a minimum 2 mm radius or chamfer; b) edges of the handles shall be rounded with a minimum 2 mm radius in the direction of the fo

39、rce applied; c) all other edges and corners with which the user may come into contact with during normal use shall be smooth, rounded or chamfered and shall have no burrs; d) distance between accessible moving parts operated by powered mechanisms, e.g. gas lifts, shall always be either 8 mm and 1 00

40、0 mm in length shall have two simultaneous vertical loads each 100 mm from the working edge, 300 mm each side of the middle N N 0 and 1 10 1 000 2 x 1 000 2 10 1 000 2 x 1 000 3 10 1 000 2 x 1 000 4 10 1 000 2 x 1 000 5 10 1 000 2 x 1 000 6 10 1 000 2 x 1 000 7 10 1 000 2 x 1 000 a) Tables 1 000 b)

41、Tables 1 000 Figure 18 Vertical static load of tables DIN EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 22 6.2.5 Vertical durability (!EN 1730:2012, 6.5“) This test is only applicable to tables with cantilever and pedestal bases. Table 21 Vertical durability of tables Table size mark Cycles Vertical

42、load 50 mm from the working edge N 0 and 1 10 000 400 2 10 000 400 3 10 000 400 4 10 000 600 5 10 000 600 6 10 000 600 7 10 000 600 Figure 19 Vertical durability of tables 7 Test report The test report shall include at least the following information: a) reference to this European Standard; b) piece

43、 of furniture tested (relevant data); c) defects before testing; d) test results; e) details of any deviations from this European Standard; f) name and address of the test facility; g) date of test; h) any variation from the testing of ranges specified in 3.1; i) compliance with the requirements. DI

44、N EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 23 !deleted text“ DIN EN 1729-2:2016-03 EN 1729-2:2012+A1:2015 (E) 24 Annex A (informative) Test method for determination of the displacement of chairs placed on tabletops A.1 General During room cleaning, chairs may be placed on tables. It may be neces

45、sary to test their resistance to falling off tables. This applies only size mark 3, 4, 5, 6 and 7 chairs. Such chairs can be tested in accordance with the test method specified below in !A.3“. A.2 Test equipment A.2.1 An impact hammer as specified in !EN 1728:2012, 5.10“. A.2.2 A tabletop, with a th

46、ickness of (22 2) mm, with a laminated mat or smooth surface (e.g. “velvet“ finish) and with edges rounded to a radius of (102+) mm. A.3 Test method Hang the chair on the test tabletop with the chair placed against the front edge of the test tabletop. Apply by means of the pendulum (see !A.2.1“) an

47、impact of 2 Nm (31 mm drop height), at a height of 400 mm above the tabletop perpendicular to the back rest of the chair, to the inside surface of the back rest (direction towards the back of the seat). The pendulum shall hit the chair once only. With the chair re-placed on the tabletop, repeat the test three times. Record if the chair slides off the test tabletop during any of the force applications when tested as specified in !A.3“. DIN EN 1729-2:2016-03