DIN EN 1728-2014 Furniture - Seating - Test methods for the determination of strength and durability German version EN 1728 2012 + AC 2013《家具 座椅 测定强度和耐用性的试验方法 德文版本EN 1728-2012+AC-2.pdf

《DIN EN 1728-2014 Furniture - Seating - Test methods for the determination of strength and durability German version EN 1728 2012 + AC 2013《家具 座椅 测定强度和耐用性的试验方法 德文版本EN 1728-2012+AC-2.pdf》由会员分享，可在线阅读，更多相关《DIN EN 1728-2014 Furniture - Seating - Test methods for the determination of strength and durability German version EN 1728 2012 + AC 2013《家具 座椅 测定强度和耐用性的试验方法 德文版本EN 1728-2012+AC-2.pdf（59页珍藏版）》请在麦多课文档分享上搜索。

1、February 2014 Translation by DIN-Sprachendienst.English price group 20No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).I

2、CS 97.140!%,J“2093997www.din.deDDIN EN 1728Furniture Seating Test methods for the determination of strength and durability;English version EN 1728:2012 + AC:2013,English translation of DIN EN 1728:2014-02Mbel Sitzmbel Prfverfahren zur Bestimmung der Festigkeit und Dauerhaltbarkeit;Englische Fassung

3、EN 1728:2012 + AC:2013,Englische bersetzung von DIN EN 1728:2014-02Ameublement Siges Mthodes dessais pour la dtermination de la rsistance et de la durabilit;Version anglaise EN 1728:2012 + AC:2013,Traduction anglaise de DIN EN 1728:2014-02SupersedesDIN EN 1728:2012-10www.beuth.deIn case of doubt, th

4、e German-language original shall be considered authoritative.Document comprises 59 pages 01.14 DIN EN 1728:2014-02 2 A comma is used as the decimal marker. National foreword This document (EN 1728:2012 + AC:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture” (Secretariat: UNI, Ital

5、y). The responsible German body involved in its preparation was the Normenausschuss Holzwirtschaft und Mbel (Timber and Furniture Standards Committee), Working Committee NA 042-05-15 AA Sitzmbel, Polstermbel und Tische. The DIN Standard corresponding to the International Standard referred to in this

6、 document is as follows: ISO 7619-2 DIN ISO 7619-2 Amendments This standard differs from DIN EN 1728:2004-08 as follows: a) the standard has been completely revised; b) title and scope have been amended: “Domestic furniture Seating” has been changed to “Furniture Seating”, they now include all types

7、 of seating without regard to use; c) tests for stacking seating have been included; d) tests for auxiliary writing surfaces have been included; e) tests for office work chairs have been included; f) tests for loungers have been included; g) the standard has been editorially revised. Compared with D

8、IN EN 1728:2012-10, the following corrections have been made: a) in Tables 1 and 2, Festgelegte Kraft (Specified force) has been replaced by Festgelegte Kraftaufbringung an der Sitzflche (Specified seat force) whereas in column 3, line 2, Festgelegte Kraft (Specified force) has been replaced by Fest

9、gelegte Kraftaufbringung an der Rckenlehne (Specified back force). Previous editions DIN EN 1728: 2004-08, 2012-10 National Annex NA (informative) Bibliography DIN ISO 7619-2, Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method EUROPEAN STANDARD

10、 NORME EUROPENNE EUROPISCHE NORM EN 1728 July 2012 + AC July 2013 ICS 97.140 Supersedes EN 1728:2000 English Version Furniture - Seating - Test methods for the determination of strength and durability Ameublement - Siges - Mthodes dessais pour la dtermination de la rsistance et de la durabilit Mbel

11、- Sitzmbel - Prfverfahren zur Bestimmung der Festigkeit und Dauerhaltbarkeit EN 1728:2012 was approved by CEN on 2012-06-09 and Corrigendum AC:2013 on 2013-07-10. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standar

12、d the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English,

13、French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulga

14、ria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Tur

15、key and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN

16、1728:2012 + AC:2013 E 2 Contents Page 1 Scope 52 Normative references 53 Terms and definitions .54 General test conditions .64.1 Preliminary preparation 64.2 Application of forces .64.3 Tolerances 66 Test procedures - Chairs other than Work Chairs 166.1 General . 166.2 Determination of seat and back

17、 loading points . 176.2.1 General . 176.2.2 Seating with a back rest . 176.2.3 Seating without a back rest . 176.3 Determination of Back Angle . 196.4 Seat static load and back static load test 206.5 Seat Front Edge Static Load 226.6 Vertical load on back rests 226.7 Horizontal forward static load t

18、est on back rests . 236.8 Foot rest static load test 236.9 Leg rest static load test 236.10 Arm rest sideways static load test 246.11 Arm rest downwards static load test 246.12 Headrest static load test 256.13 Vertical upwards static load on arm rests . 266.13.1 Seating which may be moved when occup

19、ied 266.13.2 Stacking seating . 266.14 Vertical static load on auxiliary writing surfaces 266.15 Leg forward static load test . 266.16 Leg sideways static load test 276.17 Combined seat and back durability test . 286.18 Seat front edge durability test . 306.19 Durability test on seating with a multi

20、-position back rest 316.20 Arm rest durability test 316.21 Foot rest durability test 316.22 Auxiliary writing surfaces durability test . 326.23 Tipping seat operation . 326.24 Seat impact test 326.25 Back impact test . 336.26 Arm rest impact test . 346.27 Drop tests 356.27.1 Drop test for multiple s

21、eat units 356.27.2 Drop test for stacking seating . 366.27.3 Drop test from the height of a table 376.28 Backward fall test . 386.29 Castor and chair base durability . 386.30 Rolling resistance of the unloaded chair . 397 Test procedures - Work Chairs . 39ForewordForeword to AC 4.4.DIN EN 1728:2014-

22、02 EN 1728:2012+ AC:2013 (E)3 7.1 General . 397.2 Loading points . 407.2.1 General . 407.2.2 Loading point A . 407.2.3 Loading point B . 407.2.4 Loading point C . 417.2.5 Loading point D . 417.2.6 Loading point E . 417.2.7 Loading point F 417.2.8 Loading point G . 427.2.9 Loading point H . 427.2.10

23、Loading point J 427.3 Combined seat and back static load test 427.4 Seat front edge static load test 437.5 Arm rest downward static load test central . 437.6 Arm rest downward static load test front 447.7 Arm rest sideways static load test 457.8 Foot rest static load test . 457.9 Seat and back durab

24、ility . 457.10 Arm rest durability . 467.11 Swivel test 467.12 Foot rest durability 467.13 Castor and chair base durability 467.14 Rolling resistance of the unloaded chair 478 Test procedures Loungers 478.1 General . 478.2 Seat and back static load test 478.3 Additional seat and leg rest static load

25、 test . 478.4 Seat and back durability test 488.4.1 Seat and back durability test procedure . 488.4.2 Additional seat durability test procedure . 498.5 Durability test on back rest mechanism . 508.6 Arm rest downwards static load test . 508.7 Arm rest durability test . 508.8 Impact test 508.9 Liftin

26、g test for mobile loungers . 52Annex A (normative) Seat loading pad data 54Annex B (informative) Arm rest loading pad details . 57DIN EN 1728:2014-02 EN 1728:2012 + AC:2013 (E)4 Foreword This document (EN 1728:2012) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of

27、which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at the latest by January 2013. Attention is drawn to the p

28、ossibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 1728:2000. The main changes with respect to the previous edition are listed below. Al

29、l test methods for seating used in European Standards for furniture have been collated in one document. The document now contains methods that were previously listed in EN 581-2, Outdoor furniture, EN 1335-3, Office work chair, and EN 15373, Non-domestic seating. A static load test for headrests has

30、 been included. Wherever possible test methods have been simplified and clarified for ease of use. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cy

31、prus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the Unit

32、ed Kingdom. Foreword to EN 1728:2012/AC:2013 This document (EN 1728:2012/AC:2013) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI (Italy). DIN EN 1728:2014-02 EN 1728:2012 + AC:2013 (E)5 1 Scope This European Standard specifies test methods fo

33、r the determination of strength and durability of the structure of all types of seating without regard to use, materials, design/construction or manufacturing process. This European Standard does not apply to childrens highchairs, table mounted chairs and bath seats which are covered by other Europe

34、an Standards. Test methods for the assessment of ageing, degradation, ergonomics and electrical functions are not included. The test methods are not intended to assess the durability of upholstery materials, such as upholstery filling materials and upholstery covers. This European Standard does not

35、include any requirements. Requirements for different end uses can be found in other Standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

36、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 7619-2:2010, Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method 3 Terms and definitions For the purposes of this document, the fo

37、llowing terms and definitions apply. 3.1 structure load bearing parts of furniture such as the frame, seat, back and arm supports and suspension 3.2 leg rest extension of the seat area intended to support the legs of the user Note 1 to entry: A leg rest might or might not be permanently attached to

38、the structure of the item of seating. 3.3 foot rest part intended to support the feet of the user and which assists the user getting on or off an item of seating Note 1 to entry: A foot rest might or might not be permanently attached to the structure of the item of seating. 3.4 work chair chair, wit

39、h or without arm rests, for use by one adult in the office or home office (for example working with a computer), whose upper part, which includes the seat and back, is supported on a single column and can rotate in the horizontal plane and is at least adjustable in height DINEN 1728:2014-02EN 1728:2

40、012 + AC:2013 (E)6 3.5 back rest element that supports the back of the user higher than 100 mm above the seat loading point 3.6 arm rest length distance between vertical lines through the front and rear edges of the arm rest 4 General test conditions 4.1 Preliminary preparation The furniture shall b

41、e tested as delivered. Knock-down furniture shall be assembled according to the instructions supplied. If the instructions allow the furniture to be assembled or combined in different ways, the most adverse combination shall be used for each test. Knock-down fittings shall be tightened before testin

42、g. Further tightening shall not take place unless specifically required by the manufacturer. For seating that is designed to be fixed to the structure of a building, the unit shall be mounted according to the manufacturers instructions to a structure representative of the service installation. This

43、structure shall be sufficiently strong and stiff to eliminate the possibility of it affecting the results of the test. Unless otherwise specified by the manufacturer, the sample for test shall be stored in indoor ambient conditions for at least 24 h immediately prior to testing. The tests shall be c

44、arried out at indoor ambient conditions. However, if during a test the temperature is outside the range 15C to 25C, the maximum and/or minimum temperature shall be recorded in the test report. 4.2 Application of forces The test forces in durability and static load tests shall be applied sufficiently

45、 slowly to ensure that negligible dynamic load is applied. The forces in durability tests shall be applied sufficiently slowly to ensure that kinetic heating does not occur. Unless otherwise stated, static forces shall be maintained for (10 2) s. Unless otherwise stated, durability forces shall be m

46、aintained for (2 1) s. The forces may be replaced by masses. The relationship 10 N = 1 kg shall be used. 4.3 Tolerances Unless otherwise stated, the following tolerances are applicable to the test equipment: Forces: 5 % of the nominal force; Velocities: 5 % of the nominal velocity; Masses: 1 % of th

47、e nominal mass; Dimensions: 1 mm of the nominal dimension; Angles: 2oof the nominal angle. DIN EN 1728:2014-02 EN 1728:2012 + AC:2013 (E)7 The accuracy for the positioning of loading pads and impact plates shall be 5 mm. NOTE For the purposes of uncertainty measurement, test results are not consider

48、ed to be adversely affected when the above tolerances are met. 5 Test equipment and apparatus The equipment shall not inhibit deformation nor cause unnatural deformation of the unit/component, i.e. it shall be able to move so that it can follow the deformation of the unit/component during testing. All loading