DIN EN 15766-2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone English version of DIN EN 15766 2009-08《包.pdf

《DIN EN 15766-2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone English version of DIN EN 15766 2009-08《包.pdf》由会员分享，可在线阅读，更多相关《DIN EN 15766-2009 Packaging - Flexible aluminium tubes - Test methods to determine the polymerization of the internal coating with acetone English version of DIN EN 15766 2009-08《包.pdf（7页珍藏版）》请在麦多课文档分享上搜索。

1、August 2009DEUTSCHE NORM English price group 6No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 55.120!$YES“1543448www.d

2、in.deDDIN EN 15766Packaging Flexible aluminium tubes Test methods to determine the polymerization of the internal coatingwith acetoneEnglish version of DIN EN 15766:2009-08Packmittel Aluminiumtuben Prfverfahren zur Bestimmung der Polymerisation der Innenbeschichtung mit Aceton;Deutsche Fassung EN 15

3、766:2009.Englische Fassung DIN EN 15766:2009-08www.beuth.deDocument comprises 7 pagesDIN EN 15766:2009-08 National foreword This standard has been prepared by Technical Committee CEN/TC 261 “Packaging” (Secretariat: AFNOR, France). The responsible German body involved in its preparation was the Norm

4、enausschuss Verpackungswesen (Packaging Standards Committee), Technical Committee NA 115-02-08 AA Tuben. 2 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 15766 May 2009 ICS 55.120 English Version Packaging Flexible aluminium tubes Test methods to determine the polymerization of the internal co

5、ating with acetone Emballage Tubes souples en aluminium Mthodes dessai visant vrifier la polymrisation du revtement interne lactone Packmittel Aluminiumtuben Prfverfahren zur Bestimmung der Polymerisation der Innenbeschichtung mit Aceton This European Standard was approved by CEN on 23 April 2009. C

6、EN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on appl

7、ication to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre

8、has the same status as theofficial versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Po

9、rtugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2009 CEN All rights of exploitation in any form and by any mean

10、s reserved worldwide for CEN national Members. Ref. No. EN 15766:2009: EEN 15766:2009 (E) 2 Contents PageForeword 31 Scope 42 Principle 43 Test device/Test media .44 Procedure .45 Evaluation of results .46 Test report 5DIN EN 15766:2009-08 EN 15766:2009 (E) 3 Foreword This document (EN 15766:2009) h

11、as been prepared by Technical Committee CEN/TC 261 “Packaging”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2009, and conflicting national s

12、tandards shall be withdrawn at the latest by November 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENEL

13、EC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo

14、urg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. DIN EN 15766:2009-08 EN 15766:2009 (E) 4 1 Scope This standard specifies a method for the determination of the polymerization of the internal coating of aluminium tubes

15、with acetone. 2 Principle Epoxy phenolic internal coatings are mostly used as internal coating for aluminium tubes. Acetone is a good solvent for epoxy-phenolic coatings before polymerization. Polymerized epoxy-phenolic coatings are not soluble. Therefore, when the surface of the coating is rubbed w

16、ith a piece of cotton wool soaked in acetone, if the coating has not been sufficiently hardened, there will be partial dissolution and a discharge on the cotton wool (colouring). For non-epoxy phenolic coatings, the test method shall be mutually agreed upon by customer and supplier. 3 Test device/Te

17、st media Acetone CAS No. 67-64-1. Cotton wool. 4 Procedure Cut the tube and flatten the cylindrical part. Rub 10 1 times up and down with a piece of cotton wool soaked in acetone with a pressure of approximately 10 N/cm2. Check the colour of the cotton wool. 5 Evaluation of results After rubbing, th

18、e coated surface shall not have become matt or sticky. There should be no colouring of the cotton wool, nor any apparent reaction on the coated surface. A slight coloration of the cotton wool can be accepted if no apparent reactions on the coated surface are detected. DIN EN 15766:2009-08 EN 15766:2

19、009 (E) 5 6 Test report The test report shall contain the following information: a) reference to this standard and, if necessary, a specification for the method of sampling and acceptance of the batch; b) complete identification of the batch and of the tubes checked; c) date of production; d) number of tubes checked; e) number of defects; f) test result; g) all factors which could have affected the results or all operating details not specified in this standard; h) date, place of test and name of tester. DIN EN 15766:2009-08