DIN EN 13731-2008 Lifting bag systems for fire and rescue service use - Safety and performance requirements English version of DIN EN 13731 2008-02《消防和营救设备用提升气垫系统 安全和性能要求》.pdf

《DIN EN 13731-2008 Lifting bag systems for fire and rescue service use - Safety and performance requirements English version of DIN EN 13731 2008-02《消防和营救设备用提升气垫系统 安全和性能要求》.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13731-2008 Lifting bag systems for fire and rescue service use - Safety and performance requirements English version of DIN EN 13731 2008-02《消防和营救设备用提升气垫系统 安全和性能要求》.pdf（31页珍藏版）》请在麦多课文档分享上搜索。

1、February 2008DEUTSCHE NORM English price group 14No part of this standard may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 11.160; 13.220.10!$L=

2、T“1412649www.din.deDDIN EN 13731Lifting bag systems for fire and rescue service use Safety and performance requirementsEnglish version of DIN EN 13731:2008-02Hebekissensysteme fr Feuerwehr und Rettungsdienste Sicherheits- und LeistungsanforderungenEnglische Fassung DIN EN 13731:2008-02SupersedesDIN

3、14152-1:1989-07See start of validitywww.beuth.deDocument comprises 31 pagesDIN EN 13731:2008-02 2 Start of validity This standard is valid from 1 February 2008. DIN 14152-1:1989-07 may be used in parallel until May 2008. National foreword This standard includes safety requirements. This standard has

4、 been prepared by Technical Committee CEN/TC 192 “Fire service equipment” (Secretariat: BSI, United Kingdom). The responsible German body involved in its preparation was the Normenausschuss Feuerwehrwesen (Fire-fighting and Fire Protection Standards Committee), Technical Committee NA 031-04-10 AA Re

5、ttungsgerte. Safety and minimum performance requirements, and test methods for lifting bag systems used by fire and rescue services have been specified so that this document can be deemed a harmonized standard which can be applied to fulfil the essential requirements of both the New Approach Directi

6、ve 98/37/EC (the “Machinery Directive”) as amended by Directive 98/79/EC and of the revised Machinery Directive 2006/42/EC. Lifting bag systems are used by fire and rescue services primarily to facilitate the release of persons trapped following accidents involving vehicles, heavy machinery, collaps

7、ed buildings, collapsed trenches, fallen trees and other natural objects. Lifting bag systems are generally used in conjunction with other means to support or stabilise the load being moved, for example blocks, chocks or props. Attention is drawn to the possibility that some of the elements of this

8、document may be the subject of patent rights. DIN shall not be held responsible for identifying any or all such patent rights. The DIN Standard corresponding to the International Standard referred to in clause 2 of the EN is as follows: ISO 5598 no national standard available Amendments This standar

9、d differs from DIN 14152-1:1989-07 as follows: a) The terminology, requirements and test methods specified in the European Standard have been adopted so that this document can be deemed a harmonized standard which can be applied to fulfil the essential requirements of both the New Approach Directive

10、 98/37/EC (the “Machinery Directive”), as amended by Directive 98/79/EC, and of the revised Machinery Directive 2006/42/EC. b) Requirements are now divided up into safety requirements and/or protective measures and performance requirements. c) A list of significant hazards that can be generated by l

11、ifting bag systems is now included. d) Requirements regarding information for use have been considerably expanded. Previous editions DIN EN 14152-1: 1986-11, 1989-07 EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 13731November 2007ICS 11.160; 13.220.10English VersionLifting bag systems for fire a

12、nd rescue service use - Safety andperformance requirementsCoussins de levage lusage des services dincendie et desecours - Prescriptions de scurit et de performancesHebekissenysteme fr Feuerwehr und Rettungsdienste -Sicherheits- und LeistungsanforderungenThis European Standard was approved by CEN on

13、30 September 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may

14、be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN M

15、anagement Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, No

16、rway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2007 CEN All rights of exploitation in any form a

17、nd by any means reservedworldwide for CEN national Members.Ref. No. EN 13731:2007: EEN 13731:2007 (E) 2 Contents Page Foreword3 Introduction .4 1 Scope 5 2 Normative references 6 3 Terms and definitions .7 4 List of significant hazards 9 5 Safety requirements and/or protective measures and performan

18、ce requirements11 5.1 General11 5.2 Complete lifting bag system.11 5.3 Hose assemblies and couplings 11 5.4 Regulators 12 5.5 Control devices12 5.6 Pressure indicators .13 5.7 Safety valves 13 5.8 Lifting bags.13 5.9 Performance requirements .14 6 Verification of safety requirements and/or protectiv

19、e measures and performance requirements 14 6.1 General14 6.2 Complete lifting bag system.15 6.3 Hose assemblies and couplings 15 6.4 Regulators 16 6.5 Control devices17 6.6 Pressure indicators .17 6.7 Safety valves 17 6.8 Lifting bags.17 6.9 Verification of performance requirements 22 7 Information

20、for use 22 7.1 General22 7.2 Signals and warning devices22 7.3 Accompanying documents.22 7.4 Marking .22 Annex A (normative) Information to be supplied24 A.1 General24 A.2 Training.24 A.3 Safe and efficient operation24 A.4 Stowage and cleaning .25 A.5 Inspection, testing and maintenance.25 Annex B (

21、informative) Diagrammatic example of typical lifting bag system .26 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC 27 Annex ZB (informative) Relationship between this European Standard and the Essential Requirements of EU Di

22、rective 2006/42/EC 28 Bibliography 29 DIN EN 13731:2008-02 : - EN 13731:2007 (E) 3 Foreword This document (EN 13731:2007) has been prepared by Technical Committee CEN/TC 192 “Fire service equipment”, the secretariat of which is held by BSI. This European Standard shall be given the status of a natio

23、nal standard, either by publication of an identical text or by endorsement, at the latest by May 2008, and conflicting national standards shall be withdrawn at the latest by May 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights

24、. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship

25、with EU Directive(s), see informative Annexes ZA and ZB, which are an integral part of this document. NOTE 1 It is recommended that users of this European Standard consider the desirability of independent (3rd party) certification of product conformity with this European Standard based on testing an

26、d continuing validation for the purpose of establishing the performance of a lifting bag system. NOTE 2 The equipment subject to this European Standard is not considered to be subject to the Pressure Equipment Directive. According to the CEN/CENELEC Internal Regulations, the national standards organ

27、izations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Ro

28、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. DIN EN 13731:2008-02 : - EN 13731:2007 (E) 4 Introduction This European Standard is a type C standard as stated in EN ISO 12100-1. The machinery concerned and the extent to which hazards, hazardous situations and events are co

29、vered are indicated in the scope of this document. Where provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and

30、built according to the provisions of this type C standard. Lifting bag systems are used by Fire and Rescue Services principally to facilitate the release of persons trapped following accidents involving vehicles, heavy machinery, collapsed buildings, collapsed trenches, fallen trees and other natura

31、l objects. Lifting bag systems are generally used in conjunction with other means to support or stabilise the load being moved, for example, blocks, chocks and props. When compiling this European Standard, it was assumed that: a) the manufacturer will design and/or use components in accordance with

32、the usual engineering practise and calculation codes, including all failure modes; b) only trained and competent persons whilst wearing suitable gloves, will use and operate the machinery; c) the working place is adequately lit; d) negotiations occur between the manufacturer and the purchaser concer

33、ning particular conditions for the use and places of use for the machinery related to health and safety, which are not within the limits of the scope of this European Standard. DIN EN 13731:2008-02 EN 13731:2007 (E) 5 1 Scope This European Standard specifies requirements for lifting bag systems, whe

34、re intended operation is inflation by compressed air and used primarily by fire and rescue services. This European Standard applies to lifting bag systems including some or all of the following components: hose assemblies and couplings; regulators; control devices; pressure indicators; safety valves

35、; lifting bags. This European Standard applies to lifting bag systems intended for operation under ambient temperatures between -20 C and 55 C. This European Standard deals with all significant hazards, hazardous situations and events during the commissioning, operation and maintenance arising from

36、a lifting bag system when it is used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard specifies minimum performance requirements and test methods for lifting bag systems. This European Standard does not establi

37、sh the additional requirements for: a) operation in severe conditions ( e.g. extreme environmental conditions such as: temperatures outside the range from -20 C to + 55 C, corrosive environment, tropical environment, contaminating environments, strong magnetic fields, potentially explosive atmospher

38、es); NOTE 1 If use of the lifting bag system is foreseen in severe conditions, this should be agreed between the purchaser and the manufacturer at the time of ordering. In this case an additional risk analysis should be carried out. Additional measures and additional information for use may be neces

39、sary. b) risk directly arising from any means for handling or transportation of the lifting bag system by equipment other than that designed as part of the lifting bag; c) lifting bag systems manufactured for specialized use, e.g. the lifting of persons or heavy recovery where exceptional stroke mov

40、ement is required; d) any hazard arising from the source of compressed air, except where this is a manually operated air pump. NOTE 2 Where the source is from an air compressor or from a pressurised cylinder or other similar source, it is assumed that the source conforms to an appropriate European S

41、tandard or legislation. This European Standard is not dealing with noise, as it is not considered to be a significant hazard. This European Standard is not applicable to lifting bag systems which are manufactured before the date of its publication by CEN. DIN EN 13731:2008-02 EN 13731:2007 (E) 6 2 N

42、ormative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 659, Protective gloves for

43、 firefighters EN 764-1:2004, Pressure equipment Part 1: Terminology Pressure, temperature, volume, nominal size EN 837-1, Pressure gauges Part 1: Bourdon tube pressure gauges Dimensions, metrology, requirements and testing EN 837-2, Pressure gauges Part 2: Selection and installation recommendations

44、for pressure gauges EN 837-3, Pressure gauges Part 3: Diaphragm and capsule pressure gauges Dimensions, metrology, requirements and testing EN 894-1, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 1: General principles for human interactions with di

45、splays and control actuators EN 894-2, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 2: Displays EN 894-3, Safety of machinery Ergonomics requirements for the design of displays and control actuators Part 3: Control actuators EN 62079, Preparation

46、of instructions Structuring, content and presentation (IEC 62079:2001) EN ISO 2398, Rubber hose, textile-reinforced for compressed air Specification (ISO 2398:1995) EN ISO 2503, Gas welding equipment Pressure regulators for gas cylinders used in welding, cutting and allied processes up to 300 bar (I

47、SO 2503:1998) EN ISO 4126-1, Safety devices for protection against excessive pressure Part 1: Safety valves (ISO 4126-1:2004) EN ISO 4672:1999, Rubber and plastics hoses Sub-ambient temperature flexibility tests (ISO 4672:1997) EN ISO 5774, Plastics hoses, textile-reinforced, for compressed air Spec

48、ification (ISO 5774:1997) EN ISO 7751, Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to design working pressure (ISO 7751:1991) EN ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology (ISO 12100-

49、1:2003) EN ISO 12100-2:2003, Safety of machinery Basic concepts, general principles for design Part 2: Technical principles (ISO 12100-2:2003) ISO 5598:1985, Fluid power systems and components Vocabulary DIN EN 13731:2008-02 EN 13731:2007 (E) 7 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100-1:2003, EN 764-1:2004, ISO 5598:1985 and the following apply. 3.1 pressure pressure relative to atmospheric pressure, i.e. gauge pressure 3.2 allowable pres