DIN EN 13203-4-2017 Gas-fired domestic appliances producing hot water - Part 4 Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water.pdf

《DIN EN 13203-4-2017 Gas-fired domestic appliances producing hot water - Part 4 Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13203-4-2017 Gas-fired domestic appliances producing hot water - Part 4 Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water.pdf（47页珍藏版）》请在麦多课文档分享上搜索。

1、July 2017 English price group 18No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS 91.140.65This standard has been inc

2、luded in the body of DVGW Technical Rules.!%h?s“2692880www.din.deDIN EN 13203-4Gasfired domestic appliances producing hot water Part 4: Assessment of energy consumption of gas combined heat and powerappliances (mCHP) producing hot water and electricity;English version EN 132034:2016,English translat

3、ion of DIN EN 13203-4:2017-07Gasbeheizte Gerte fr die sanitre Warmwasserbereitung fr den Hausgebrauch Teil 4: Bewertung des Energieverbrauchs von Gasgerten mit KraftWrmeKopplung (MikroKWK) zur Warmwasserbereitung und Stromerzeugung;Englische Fassung EN 132034:2016,Englische bersetzung von DIN EN 132

4、03-4:2017-07Appareils domestiques produisant de leau chaude sanitaire utilisant les combustibles gazeux Partie 4: valuation de la consommation nergtique des appareils gaz de production combine de chaleur et dlectricit (mCHP) produisant de leau chaude et de llectricit;Version anglaise EN 132034:2016,

5、Traduction anglaise de DIN EN 13203-4:2017-07www.beuth.deDTranslation by DIN-Sprachendienst.In case of doubt, the German-language original shall be considered authoritative.Document comprises 47 pages 07.17 2 A comma is used as the decimal marker. Start of application The start of application of thi

6、s standard is 2017-07-01. National foreword This standard includes safety requirements. This document (EN 13203-4:2016) has been prepared by Technical Committee CEN/TC 109 “Central heating boilers using gaseous fuels” (Secretariat: NEN, Netherlands). The responsible German body involved in its prepa

7、ration was DIN-Normenausschuss Gastechnik (DIN Standards Committee Gas Technology), Working Committee NA 032-03-01 AA “Domestic, Commercial and Industrial Gas Utilisation”. This standard has been developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technic

8、al and Scientific Association for Gas and Water). It is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). DIN EN 13203-4:2017-07 EU

9、ROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13203-4 October 2016 ICS 91.140.65 English Version Gas-fired domestic appliances producing hot water - Part 4:Assessment of energy consumption of gas combined heat and power appliances (mCHP) producing hot water and electricity Appareils domestiques

10、 produisant de leau chaude sanitaire utilisant les combustibles gazeux - Partie 4: valuation de la consommation nergtique des appareils gaz de production combine de chaleur et dlectricit (mCHP) produisant de leau chaude et de llectricit Gasbeheizte Gerte fr die sanitre Warmwasserbereitung fr den Hau

11、sgebrauch - Teil 4: Bewertung des Energieverbrauchs von Gasgerten mit Kraft-Wrme-Kopplung (Mikro-KWK) zur Warmwasserbereitung und Stromerzeugung This European Standard was approved by CEN on 6 August 2016. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the

12、conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard e

13、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national

14、standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia

15、, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CEN All rights of exploitation in any form and by any means res

16、erved worldwide for CEN national Members. Ref. No. EN 13203-4:2016 EEN 13203-4:2016 (E) 2 Contents Page European foreword . 4 1 Scope 5 2 Normative references 5 3 Terms and definitions . 5 4 General test conditions . 8 4.1 Reference conditions . 8 4.2 Measurement uncertainties 8 4.3 Test conditions

17、. 9 4.3.1 General 9 4.3.2 Test room . 9 4.3.3 Water supply . 9 4.3.4 Steady-state . 9 4.3.5 Initial adjustment of the appliance . 9 4.3.6 Electrical supply . 10 4.3.7 Delivered electrical energy 10 5 Determination of the energy consumption and electrical energy generation of the appliance . 10 5.1 G

18、eneral . 10 5.2 Tapping cycles . 10 Table 1 Load profile S 12 Table 2 Load profile M . 13 Table 3 Load profile L 14 Table 4 Load profile XL . 15 Table 5 Load profile XXL . 16 Table 6 Load profile 3XL . 17 Table 7 Load profile 4XL . 18 5.3 Measurement of the energy recovered by the useful water . 19

19、5.4 Calculation of gas energy . 19 5.4.1 Calculation of the daily gas energy consumption in summer mode 19 5.4.2 Calculation of daily gas energy consumption in winter mode . 20 5.4.3 Daily gas energy consumption seasonally weighted . 20 5.5 Calculation of electrical energy . 21 5.5.1 Calculation of

20、the delivered electrical energy . 21 Figure 1 Electrical measurements Test points 21 5.5.2 Calculation of the produced electrical energy . 23 5.5.3 Calculation of electrical auxiliary energy 24 5.6 Measurement of energy consumption and production in standby mode 24 5.6.1 General . 24 5.6.2 Calculati

21、on of daily gas energy consumption in standby mode 24 5.6.3 Calculation of daily auxiliary energy in standby mode 25 5.7 Measurement of auxiliaries consumption in off mode . 26 DIN EN 13203-4:2017-07 EN 13203-4:2016 (E) 3 6 Determination of the wasted water . 26 7 Eco design Related Product Data 27

22、7.1 Water heating energy efficiency 27 7.2 Annual fuel consumption (AFC) 28 7.3 Annual electricity delivery (AED) . 28 Annex A (informative) Examples of test conditions . 30 A.1 Diagrams of test conditions 30 Figure A.1 Initial adjustment of the appliance with storage tank maintained in temperature

23、30 Figure A.2 Initial adjustment of the appliance without storage tank maintained in temperature 31 Figure A.3 Tapping cycle Test cycle for measurement of the energy consumption of the appliance with storage tank maintained in temperature 32 Figure A.4 Standby mode with control cycles 33 Annex B (in

24、formative) Test rig and measurement devices 34 B.1 General . 34 Figure B.1 Example of test rig 34 B.2 Pressure measurement 35 Figure B.2 Example of pressure measurement device . 35 B.3 Temperature measurement . 35 Figure B.3 Example of temperature measurement device . 36 Figure B.4 Example of positi

25、on of thermocouples - Method of surfaces 37 Figure B.5 Useful and delivered flow rates and temperatures . 38 Annex C (normative) Test points . 39 Figure C.1 Thermal performances for mCHP systems with combined storage tank for central heating and domestic hot water Test points 39 Figure C.2 Thermal p

26、erformances for mCHP systems with storage tank for domestic hot water only Test points . 40 Annex ZA (informative) Relationship between this European Standard and the requirements of Commission Regulation (EC) n 814/2013 41 Table ZA.1 Correspondence between this European Standard and Commission Regu

27、lation (EC) n 814/2013 . 41 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation n 812/2013 42 Table ZB.1 Correspondence between this European Standard and Commission Regulation (EC) n 812/2013 . 42 Annex ZC (informative) Relationship betwe

28、en this European Standard and the requirements of Commission Regulation (EU) n 813/2013 43 Table ZC.1 Correspondence between this European Standard and Commission Regulation (EC) n 813/2013 . 43 Annex ZD (informative) Relationship between this European Standard and the requirements of Commission Del

29、egated Regulation (EU) n 811/2013 . 44 Table ZD.1 Correspondence between this European Standard and Commission Regulation (EC) n 811/2013 . 44 Bibliography . 45 DIN EN 13203-4:2017-07 EN 13203-4:2016 (E) 4 European foreword This document (EN 13203-4:2016) has been prepared by Technical Committee CEN

30、/TC 109 “Central heating boilers using gaseous fuels”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2017, and conflicting national standards shall

31、 be withdrawn at the latest by April 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights This document has been prepared under a mandate given to CE

32、N by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, B, C or D, which is an integral part of this document. The safety operation of the boiler is not covered by t

33、his standard. Safety is proved by means of the essential safety requirements of the Gas Appliances Directive 2009/142/EC. This way be achieved by compliance with the appropriate existing harmonized standards. NOTE Useful standards are EN 26, EN 89, EN 155021, EN 1550221, EN 1550222 and EN 50465:2015

34、. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, G

35、ermany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13203-4:2017-07 EN 13203-4:2016 (E) 5 1 Scope This European Standard is applic

36、able to gas-fired mCHP appliances producing domestic hot water and electricity. The electricity is generated in a process linked to the production of useful heat. It applies to a mCHP appliances marketed as single unit or as a package fully specified by a manufacturer that have: a gas heat input not

37、 exceeding 70 kW; an electrical output not exceeding 50 kW and a hot water storage capacity not exceeding 500 l. EN 13203-1 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a variety of uses. It also gives a system for presenting the information to

38、 the user. The present document sets out a method for assessing the energy performance of gas fired mCHP appliances. It defines a number of daily tapping cycles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling th

39、e energy performances of different gas-fired appliances to be compared and matched to the needs of the user. When the mCHP generator does not supply domestic hot water in the summer period, the present standard is not applicable. EN 13203-2 is used for performance assessment of these generators. 2 N

40、ormative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendmen

41、ts) applies. EN 13203-1, Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries EN 13203-2, Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption 3 Terms and definitions For the purposes of this document, t

42、he following terms and definitions apply. 3.1 storage tank reservoir for domestic hot water and or central heating water 3.2 nominal domestic hot water heat input (Qnw) value of the heat input stated in the appliance instructions for the production of domestic hot water Note 1 to entry: Qnwis expres

43、sed in kilowatt (kW) 3.3 summer mode conditions during which the appliance supplies energy only for the production of domestic hot water DIN EN 13203-4:2017-07 EN 13203-4:2016 (E) 6 3.4 winter mode conditions during which the combination mCHP appliance supplies energy for the production of domestic

44、hot water and/or space heating 3.5 domestic water test temperature temperature of the delivered water at which the tests are conducted 3.6 control cycle time cycle for keeping components and/or the storage tank (if any) of the domestic hot water circuit at predetermined temperature level, consisting

45、 of an ON duration time during which the heating of the domestic hot water (by gas energy and/or auxiliary energy) is operating, and an OFF duration time during which no heating occurs 3.7 useful water quantity of water delivered at the tap for which the temperature increase is in accordance with th

46、e requirement fixed for each individual delivery of the tapping cycles 3.8 wasted water quantity of water delivered at the tap for which the temperature increase is not in accordance with the requirement fixed for each individual delivery of the tapping cycles 3.9 standby mode operating state in whi

47、ch the appliance can provide domestic hot water at any time Note 1 to entry: In the case of an appliance with a control cycle for keeping components and/or the storage tank (if any) of the domestic hot water circuit at predetermined temperature level no tapping is made. 3.10 off mode state of an app

48、liance, selected by the user, in which domestic hot water cannot be provided 3.11 mCHP appliance appliance which is placed on the market either as a complete package or specified as a complete package to deliver safely and effectively the heating, electrical power and the domestic hot water service

49、claimed, comprising as relevant: primary heat and power generator; supplementary heat generator; flue ducts; thermal store 3.12 mCHP generator preferential heat and power generator DIN EN 13203-4:2017-07 EN 13203-4:2016 (E) 7 3.13 supplementary heat generator non-preferential heat source providing peak load 3.14 power conditioning and control system equipment used to change