DIN EN 13203-2-2015 Gas-fired domestic appliances producing hot water - Part 2 Assessment of energy consumption German version EN 13203-2 2015《家用燃气器件生产热水 第2部分 能量消耗评定 德文版本EN 13203-2.pdf

《DIN EN 13203-2-2015 Gas-fired domestic appliances producing hot water - Part 2 Assessment of energy consumption German version EN 13203-2 2015《家用燃气器件生产热水 第2部分 能量消耗评定 德文版本EN 13203-2.pdf》由会员分享，可在线阅读，更多相关《DIN EN 13203-2-2015 Gas-fired domestic appliances producing hot water - Part 2 Assessment of energy consumption German version EN 13203-2 2015《家用燃气器件生产热水 第2部分 能量消耗评定 德文版本EN 13203-2.pdf（40页珍藏版）》请在麦多课文档分享上搜索。

1、August 2015 Translation by DIN-Sprachendienst.English price group 16No part of this translation may be reproduced without prior permission ofDIN Deutsches Institut fr Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).ICS

2、 91.140.65This standard has been included in the body of DVGW Technical Rules.!%EC“2342932www.din.deDDIN EN 13203-2Gas-fired domestic appliances producing hot water Part 2: Assessment of energy consumption;English version EN 13203-2:2015,English translation of DIN EN 13203-2:2015-08Gasbeheizte Gerte

3、 fr die sanitre Warmwasserbereitung fr den Hausgebrauch Teil 2: Bewertung des Energieverbrauchs;Englische Fassung EN 13203-2:2015,Englische bersetzung von DIN EN 13203-2:2015-08Appareils domestiques produisant de leau chaude sanitaire utilisant les combustiblesgazeux Partie 2: valuation de la consom

4、mation nergtique;Version anglaise EN 13203-2:2015,Traduction anglaise de DIN EN 13203-2:2015-08SupersedesDIN EN 13203-2:2006-11www.beuth.deDocument comprises 40 pagesIn case of doubt, the German-language original shall be considered authoritative.07.15DIN EN 13203-2:2015-08 2 A comma is used as the

5、decimal marker. National foreword This document (EN 13203-2:2015) has been prepared by Technical Committee CEN/TC 109 “Central heating boilers using gaseous fuels” (Secretariat: NEN, Netherlands). The responsible German body involved in its preparation was the DIN-Normenausschuss Gastechnik (DIN Sta

6、ndards Committee Gas Technology), Working Committee NA 032-03-01 AA Husliche, gewerbliche und industrielle Gasanwendung. This standard has been developed with the consensus of the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water) It

7、is intended to include this standard in the body of technical rules and standards for gas issued by the DVGW Deutscher Verein des Gas- und Wasserfaches e.V. (German Technical and Scientific Association for Gas and Water). Amendments This standard differs from DIN EN 13203-2:2006-11 as follows: a) re

8、quirements of Regulations (EC) No. 811/2013, (EC) No. 812/2013, (EC) No. 813/2013 and (EC) No. 814/2013 have been incorporated. Previous editions DIN EN 13203-2: 2006-11 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13203-2 May 2015 ICS 91.140.65 Supersedes EN 13203-2:2006English Version Gas-

9、fired domestic appliances producing hot water - Part 2: Assessment of energy consumption Appareils domestiques produisant de leau chaude sanitaire utilisant les combustibles gazeux - Partie 2: valuation de laconsommation nergtique Gasbeheizte Gerte fr die sanitre Warmwasserbereitung fr den Hausgebra

10、uch - Teil 2: Bewertung des Energieverbrauchs This European Standard was approved by CEN on 3 April 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio

11、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by

12、translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, F

13、inland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZ

14、ATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13203-2:2015 EEN 13203-2:2015 (E) 2 Contents

15、Page Foreword 4 Introduction .5 1 Scope 6 2 Normative references 6 3 Terms and definitions .6 4 General test conditions .8 4.1 Reference conditions 8 4.2 Measurement uncertainties 8 4.3 Test conditions 9 4.3.1 General 9 4.3.2 Test room 9 4.3.3 Water supply 9 4.3.4 Steady state 9 4.3.5 Initial adjust

16、ment of the appliance .9 4.3.6 Electrical supply . 10 5 Determination of the energy consumption of the appliance 10 5.1 General . 10 5.2 Tapping cycles 10 5.3 Measurement of the energy recovered by the useful water . 17 5.4 Calculation of gas energy 18 5.4.1 Calculation of daily gas energy consumpti

17、on in summer mode . 18 5.4.2 Calculation of daily gas energy consumption in winter mode 18 5.4.3 Daily gas energy consumption seasonally weighted . 19 5.5 Calculation of daily electrical energy . 19 5.6 Measurement of energy consumption in standby mode 20 5.6.1 General . 20 5.6.2 Calculation of dail

18、y gas energy consumption in standby mode . 20 5.6.3 Calculation of daily auxiliary energy in standby mode. 20 5.7 Measurement of daily auxiliary energy consumption in off mode 21 6 Determination of the wasted water . 21 7 Eco design Related Products Data . 22 7.1 Water heating energy efficiency 22 7

19、.2 Annual fuel consumption (AFC) 23 7.3 Annual electricity consumption (AEC) . 23 Annex A (informative) Test conditions 25 Annex B (informative) Test rig and measurement devices . 29 B.1 General . 29 B.2 Pressure measurement 30 B.3 Temperature measurement 30 Annex ZA (informative) Relationship betwe

20、en this European Standard and the requirements of Commission Regulation (EC) n 814/2013 . 34 Annex ZB (informative) Relationship between this European Standard and the requirements of Commission Regulation n 812/2013 35 DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 3 Annex ZC (informative) Relationship

21、 between this European Standard and the requirements of Commission Regulation (EU) n 813/2013 36 Annex ZD (informative) Relationship between this European Standard and the requirements of Commission Delegated Regulation (EU) n 811/2013 37 Bibliography 38 DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 4

22、Foreword This document (EN 13203-2:2015) has been prepared by Technical Committee CEN/TC 109 “Central heating boilers using gaseous fuels”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or

23、by endorsement, at the latest by November 2015, and conflicting national standards shall be withdrawn at the latest by November 2015. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible

24、 for identifying any or all such patent rights. This document supersedes EN 13203-2:2006. The main purpose of this revision is to provide a means of conforming to requirements of Commission Delegated Regulation (EC) n 813/2013, (EC) n 811/2013, (EC) n 812/2013 and (EC) n 814/2013. This document has

25、been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Regulation(s). For relationship with EU Regulation(s), see informative Annexes ZA, ZB, ZC or ZD, which are integral parts of this document. Accordi

26、ng to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, G

27、reece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 5 Introduction The safety operation of the boiler o

28、r water heater is not covered by this standard. Safety should be proved by means of the essential safety requirements of the Gas Appliances Directive 2009/142/EC. This may be achieved by compliance with the appropriate existing harmonized standards. NOTE Useful standards are EN 26, EN 89, EN 15502-1

29、, EN 15502-2-1 and EN 15502-2-2. DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 6 1 Scope This European Standard is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage tank appliances; waters-heaters and combination boilers that have: a heat inpu

30、t not exceeding 70 kW; and a hot water storage tank capacity (if any) not exceeding 500 l. In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit. EN 13203-1 sets out in qualitative and quant

31、itative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It defines a number of daily tapping cycle

32、s for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-f

33、ired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited appl

34、ies. For undated references, the latest edition of the referenced document (including any amendments) applies. Not applicable. 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 storage tank reservoir for domestic hot water 3.2 nominal domestic

35、hot water heat input (Qnw) value of the heat input for the production of domestic hot water stated in the instructions Symbol: Qnw Unit: kilowatt (kW) 3.3 summer mode conditions during which the appliance supplies energy only for the production of domestic hot water 3.4 winter mode conditions during

36、 which the combination boiler supplies energy for the production of domestic hot water and space heating 3.5 domestic water test temperature temperature of the delivered water at which the tests are conducted DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 7 3.6 control cycle the time cycle for keeping c

37、omponents and/or the storage tank (if any) of the domestic hot water circuit at predetermined temperature level, consists of an ON duration time during which the heating of the domestic hot water (by gas energy and/or auxiliary energy) is operating, and an OFF duration time during which no heating o

38、ccurs 3.7 useful water quantity of water delivered at the tap for which the temperature increase is in accordance with the requirement fixed for each individual delivery of the tapping cycles 3.8 wasted water quantity of water delivered at the tap for which the temperature increase is not in accorda

39、nce with the requirement fixed for each individual delivery of the tapping cycles 3.9 stand by mode operating state in which the appliance can provide domestic hot water at any time Note 1 to entry: In the case of an appliance with a control cycle for keeping components and/or the storage tank (if a

40、ny) of the domestic hot water circuit at predetermined temperature level no tapping is made. 3.10 off mode state of an appliance, selected by the user, in which domestic hot water cannot be provided 3.11 useful water flow rate flow rate of water delivered at the tap for which the temperature increas

41、e is in accordance with the requirement fixed for each individual delivery of the tapping cycles 3.12 useful water temperature water temperature, expressed in degrees Celsius, delivered at the tap 3.13 appliance flow rate flow rate delivered by the appliance before the mixing device, if applicable 3

42、.14 appliance water temperature (Td) water temperature, expressed in degrees Celsius, delivered by the appliance before the mixing device 3.15 water temperature rise (Tm) in K difference between the useful water temperature and the cold water temperature, at which hot water is contributing to the re

43、ference energy as specified in the tapping cycles 3.16 water temperature rise for basin tapping types (Tp) in K difference between the useful water temperature and the cold water temperature, calculated as a mean value over the water DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 8 4 General test condit

44、ions 4.1 Reference conditions Unless otherwise stated, the general test conditions shall be as follows: cold water temperature: 10 C; maximum average variation over the test period: 2 K; cold water pressure: (2 0,1) bar; ambient air temperature: 20 C; maximum average variation over the test period 1

45、 K; maximum variation during the tests 2 K; electrical supply voltage: (230 2) V (single phase). 4.2 Measurement uncertainties Except where otherwise stated in the clauses describing the tests, the uncertainties of measurements carried out shall be not greater than the maximum uncertainties indicate

46、d below. The standard deviations shall be evaluated taking account of the various sources of uncertainty: contribution from the instrument, repeatability, calibration, ambient conditions, etc. water rate: 1 %; gas rate: 1 %; time: 0,2 s; temperatures: ambient: 1 K; water: 0,5 K; gas: 0,5 K; mass: 0,

47、5 %; gas pressure: 1 %; gas calorific value: 1 %; gas density: 0,5 %; electrical energy: 2 %. The stated measurement uncertainties relate to individual measurements. For measurements that combine a number of individual measurements, smaller uncertainties on the individual measurements may be necessa

48、ry to ensure a total uncertainty within 2 % under the steady state conditions. These uncertainties correspond to two standard deviations (2). DIN EN 13203-2:2015-08 EN 13203-2:2015 (E) 9 4.3 Test conditions 4.3.1 General Except where otherwise stated, the appliance is tested under the following cond

49、itions. For combination gas boiler, the tests shall be carried out only in summer mode as defined in 3.3, and the appliance shall be set in summer mode. For all tests defined by this standard, the same adjustment of the appliance shall be maintained. 4.3.2 Test room The appliance shall be installed in a well-ventilated, draught-free room (air speed less than 0,5 m/s). The appliance shall be protected from direct solar radiation and radiation from heat generat