DIN 17752-2002 Rods and bars of wrought and nickel alloys - Properties《精制合金和镍合金条材和棒材 性能》.pdf

《DIN 17752-2002 Rods and bars of wrought and nickel alloys - Properties《精制合金和镍合金条材和棒材 性能》.pdf》由会员分享，可在线阅读，更多相关《DIN 17752-2002 Rods and bars of wrought and nickel alloys - Properties《精制合金和镍合金条材和棒材 性能》.pdf（5页珍藏版）》请在麦多课文档分享上搜索。

1、ICS 77.150.40Stangen aus Nickel und Nickelknetlegierungen EigenschaftenIn keeping with current practice in standards published by the International Organization for Standardization(ISO), a comma has been used throughout as the decimal marker.Ref. No. DIN 17752 : 2002-09English price group 06 Sales N

2、o. 000603.03DEUTSCHE NORM September 200217752 No part of this translation may be reproduced without the prior permission ofDIN Deutsches Institut fr Normung e.V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen).Translation by DIN-Spr

3、achendienst.In case of doubt, the German-language original should be consulted as the authoritative text.Wrought nickel and nickel alloy rod and barsRequirements and testingContinued on pages 2 to 5.SupersedesFebruary 1983 edition.ForewordThis standard has been prepared by the Normenausschuss Nichte

4、isenmetalle (Nonferrous Metals StandardsCommittee), Technical Committee Nickelwerkstoffe.See Other relevant standards for further standards covering requirements for nickel semi-finished products.AmendmentsThis standard differs from the February 1983 edition in that it has been revised in form and s

5、ubstance,16 grades have been included and grades NiCr22Mo6Cu and NiCr21Mo6Cu have been dropped.Previous editionsDIN 17752: 1973-12, 1983-02.1 ScopeThis standard specifies requirements for the mechanical properties of wrought nickel and nickel alloy rodand bars having the dimensions specified in tabl

6、e 1, and gives details on the relevant methods of test.Where products are to have dimensions other than those covered by this standard, this shall be subject toagreement.ContentsPage1 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7、. 12 Normative references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Ordering details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Mechanical properties at ambient temperature . . . . . . . . . . . .

8、. . . . . . . . . . 25 Chemical composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Dimensions and tolerances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Testing . . . . . . . . . . . . . . . . . . . . . . . . . .

9、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Other relevant standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Page 2DIN 17752 : 2002-092 Normative referencesThis standard incorporates, by dated or undated reference, provisions from other p

10、ublications. These norma-tive references are cited at the appropriate places in the text and the titles of the publications are listed below.For dated references, subsequent amendments to or revisions of any of these publications apply to thisstandard only when incorporated in it by amendment or rev

11、ision. For undated references, the latest edition ofthe publication referred to applies.DIN 1333 Presentation of numerical dataDIN 17740 Wrought nickel Chemical compositionDIN 17742 Wrought nickel-chromium alloys Chemical compositionDIN 17743 Wrought nickel-copper alloys Chemical compositionDIN 1774

12、4 Wrought nickel-chromium-molybdenum alloys Chemical compositionDIN 50125 Test pieces for the tensile testing of metallic materialsDIN 59760 Hot rolled wrought nickel and nickel alloy round bars Dimensions and tolerancesDIN 59761 Hot rolled wrought nickel and nickel alloy square bars Dimensions and

13、tolerancesDIN 59762 Hot rolled wrought nickel and nickel alloy hexagonal bars Dimensions and tolerancesDIN 59763 Hot rolled wrought nickel and nickel alloy rectangular bars Dimensions and tolerancesDIN 59765 Drawn wrought nickel and nickel alloy round bars Dimensions and tolerancesDIN 59766 Drawn wr

14、ought nickel and nickel alloy square bars Dimensions and tolerancesDIN 59767 Drawn wrought nickel and nickel alloy hexagonal bars Dimensions and tolerancesDIN 59768 Drawn, square-edged wrought nickel and nickel alloy rectangular bars Dimensions andtolerancesDIN EN 10002-1 Metallic materials Tensile

15、testing Method of test at ambient temperature (includingCorrigendum AC 1 : 1990)DIN EN ISO 6506-1 Metallic materials Brinell hardness test Part 1: Test method (ISO 6506-1 : 1999)DIN EN ISO 6507-1 Metallic materials Vickers hardness test Part 1: Test method (ISO 6507-1 : 1997)3 Ordering detailsThe gr

16、ade and the form of product supplied is at the purchasers discretion. It is recommended that the intendeduse of the product and any further processing be indicated at the time of ordering. For designating the product,the designation specified in the relevant dimensional standard shall be used.Any pr

17、operties the products are to have shall be specified when ordering, together with the relevant testmethods.4 Mechanical properties at ambient temperatureThe products shall have the properties specified in table 1.5 Chemical compositionThe chemical composition of wrought nickel and nickel alloy rod a

18、nd bars shall be as specified in the relevantstandards referred to in table 1.6 Dimensions and tolerancesDimensions and tolerances for wrought nickel and nickel alloy rod and bars shall be as specified in DIN 59760to DIN 59763, or DIN 59765 to DIN 59768.7 TestingTensile strength, proof strength and

19、percentage elongation after fracture shall be tested in accordance withDIN 50125 and DIN EN 10002-1. It is recommended that the hardness be determined based onDIN EN ISO 6506-1, using a ball diameter of 2,5 mm and a test force of 612,9 N (HBW 2,5/62,5). Where this isnot possible, the Vickers hardnes

20、s test in accordance with DIN EN ISO 6507-1 shall be carried out, hardnessvalues higher by 15% than for the Brinell test being acceptable.When expressing the result, rounding shall be in accordance with DIN 1333, to the same number of places asis given in table 1.Page 3DIN 17752 : 2002-09Designation

21、NameNumberTable1:Mechanical propertiesMaterialTemperHeat treatmentcondition1)Size,inmm2)FromToMin.tensilestrength,RmMin. 0,2%proofstrength,Rp0,2Wrought nickel (with composition as in DIN17740)Nickel-chromium alloys (with composition as in DIN17742)Nickel-copper alloys (with composition as in DIN1774

22、3)Soft annealed Half-hard Hard Soft annealed Half-hard Soft annealed Half-hard Hard Soft annealed Half-hard Solution treated Solution treated Solution treated Soft annealed Solution treated Soft annealed Solution treated Solution treated Soft annealed Half-hard Hard Soft annealed Soft annealed Solut

23、ion treated Solution treated and age hardened(continued)Min. 1%proofstrength,Rp1,0OverMin.percentageelongationafterfracture, A5Brinell hardness(HBW 2,5/62,5)Max.Approx.Page 4DIN 17752 : 2002-09DesignationNameNumberTable1(concluded)MaterialTemperHeat treatmentcondition1)Size,inmm2)FromToMin.tensilest

24、rength,RmMin. 0,2%proofstrength,Rp0,2Nickel-chromium-molybdenum alloys (with composition as in DIN17744)Solution treated Solution treated Solution treated Solution treated Solution treated Solution treated Solution treated Solution treated Solution treated Solution treated and age hardened Soft anne

25、aled Solution treated Solution treated Solution treated and age hardened Solution treated Solution treated Solution treated2)Solution treated Soft annealed Soft annealed Solution treated Soft annealedMin. 1%proofstrength,Rp1,0OverMin.percentageelongationafterfracture, A53)3)1)Heat treatment conditio

26、n as declared by manufacturer.2)Values refer to the diameter of roundbars and to square, hexagonal and rectangularbars of the same cross section.3)At temperatures from 1204C to 1246C.Brinell hardness(HBW 2,5/62,5)Max.Approx.3)Page 5DIN 17752 : 2002-09Other relevant standardsDIN 17745 Wrought nickel-iron alloys Chemical compositionDIN 17750 Wrought nickel and nickel alloy sheet, plate and strip Requirements and testingDIN 17751 Wrought nickel and nickel alloy pipes and tubes Requirements and testingDIN 17753 Wrought nickel and nickel alloy wire Requirements and testing