CLC TS 50654-1-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1 Guidelines.pdf

《CLC TS 50654-1-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1 Guidelines.pdf》由会员分享，可在线阅读，更多相关《CLC TS 50654-1-2018 HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1 Guidelines.pdf（70页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional SpecificationsPart 1: GuidelinesPD CLC/TS 50654-1:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKA

2、TION CLC/TS 50654-1 March 2018 ICS 29.240.01 English Version HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Part 1: Guidelines Rseaux CCHT et stations de conversion connectes - Lignes directrices et listes de paramtres pour les spci

3、fications fonctionnelles - Partie 1: Lignes directrices Hochspannungsgleichstrom-Netzsysteme - Leitfaden und Parameter-Listen fr funktionale Spezifikationen - Teil 1: Leitfaden This Technical Specification was approved by CENELEC on 2018-01-22. CENELEC members are required to announce the existence

4、of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the

5、Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and th

6、e United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by a

7、ny means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50654-1:2018 ENational forewordThis Published Document is the UK implementation of CLC/TS 50654-1:2018.The UK participation in its preparation was entrusted to Technical Committee GEL/8, Systems Aspects for Electrical Energy Supply.A l

8、ist of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards

9、 Limited 2018ISBN 978 0 580 99256 8ICS 29.240.01Compliance with a British Standard cannot confer immunity from legal obligations.This Published Document was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDat

10、e Text affectedPUBLISHED DOCUMENTPD CLC/TS 50654-1:2018TECHNICAL SPECIFICATION SPCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50654-1 March 2018 ICS 29.240.01 English Version HVDC Grid Systems and connected Converter Stations - Guideline and Parameter Lists for Functional Specifications - Pa

11、rt 1: Guidelines Rseaux CCHT et stations de conversion connectes - Lignes directrices et listes de paramtres pour les spcifications fonctionnelles - Partie 1: Lignes directrices Hochspannungsgleichstrom-Netzsysteme - Leitfaden und Parameter-Listen fr funktionale Spezifikationen - Teil 1: Leitfaden T

12、his Technical Specification was approved by CENELEC on 2018-01-22. CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards i

13、n force. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,

14、 the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CEN

15、ELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. CLC/TS 50654-1:2018 EPD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 2 Contents Page European foreword . 5 Introduction .

16、6 1 Scope . 7 1.1 General 7 1.2 About the Present Release 7 2 Normative references . 7 3 Terms, definitions and abbreviations . 8 3.1 Terms and definitions . 8 3.2 Abbreviations . 10 4 Coordination of HVDC Grid System and AC Systems 10 4.1 Purpose of the HVDC Grid System and Power Network Diagram 10

17、 4.2 Hybrid AC/DC Power Flow Optimization . 11 4.3 Basic Operation Functions Converter Normal Operation State 12 4.3.1 General 12 4.3.2 AC System Frequency by a Frequency / Power Droop . 12 4.3.3 DC Voltage / DC Power Droop 13 4.4 Basic Operation Functions Converter Abnormal Operation State 14 4.4.1

18、 General 14 4.4.2 Network Conditions and Power Flow Requirements . 14 4.4.3 Abnormal AC Voltage Conditions 14 4.5 Ancillary Services . 15 4.5.1 General 15 4.5.2 Frequency Control Related Services . 15 4.5.3 AC Voltage Control Related Services 17 4.5.4 Power Oscillation Damping Services . 18 4.5.5 Sy

19、stem Restoration Services . 18 5 HVDC Grid System Characteristics . 18 5.1 HVDC Circuit Topologies . 18 5.1.1 Basic Characteristics and Nomenclature . 18 5.1.2 Attributes of HVDC Grid Systems or HVDC Grid Sub-Systems 23 5.1.3 Attributes of a Converter Station 24 5.2 Grid Operating States 25 5.2.1 No

20、rmal State 25 5.2.2 Alert State 25 5.2.3 Emergency State . 25 5.2.4 Blackout State 25 5.2.5 Restoration . 25 5.3 DC Voltages . 26 5.3.1 General 26 5.3.2 Nominal DC System Voltage . 26 5.3.3 Steady-State DC Voltage . 26 5.3.4 Temporary DC Voltage 26 PD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 3 5.4

21、 Insulation Coordination . 28 5.5 Short-Circuit Characteristics . 28 5.5.1 General Remarks . 28 5.5.2 Calculation of Short-Circuit Currents in HVDC Grid Systems 28 5.5.3 Short Circuit Current Design Requirements . 29 5.6 Steady-State Voltage and Current Distortions . 29 6 HVDC Grid System Control 30

22、 6.1 Closed-Loop Control Functions 30 6.1.1 General . 30 6.1.2 Core Control Functions 30 6.1.3 Coordinating Control Functions 30 6.2 Controller Hierarchy . 30 6.2.1 General . 30 6.2.2 Internal Converter Control 31 6.2.3 DC Node Voltage Control . 32 6.2.4 Coordinated System Control 33 6.2.5 AC/DC Gri

23、d Control 35 6.3 Propagation of Information . 36 6.4 Open-Loop Controls . 37 6.4.1 Operating Sequences for Grid Installations . 37 6.4.2 Operating Sequences for the Return Path . 38 6.4.3 Recovery 38 7 HVDC Grid System Protection . 39 7.1 General . 39 7.2 DC Fault Separation . 40 7.3 Protection Syst

24、em Related Installations and Equipment . 40 7.3.1 AC/DC Converter Station . 40 7.3.2 HVDC Grid System Topology and Equipment . 41 7.4 HVDC Grid System Protection Zones 41 7.4.1 General . 41 7.4.2 Permanent Stop P 43 7.4.3 Permanent Stop PQ . 45 7.4.4 Temporary Stop P 46 7.4.5 Temporary Stop PQ . 48

25、7.4.6 Continued Operation 48 7.4.7 Example of a Protection Zone Matrix . 50 7.5 DC Protection . 51 7.5.1 General . 51 7.5.2 DC Converter Protections 52 7.5.3 HVDC Grid System Protections . 52 7.5.4 HVDC Hub Respective HVDC Node Protections . 53 7.5.5 DC Grid Protection Communication . 54 8 AC/DC Con

26、verter Stations . 54 8.1 General . 54 8.2 AC/DC Converter Station Types 54 9 HVDC Grid System Installations 55 10 Models and Validation 55 10.1 Introduction . 55 PD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 4 10.2 HVDC Grid System Studies . 56 10.2.1 Type of Studies 56 10.2.2 Tools and Methods 57 1

27、0.3 Model General Specifications 57 10.3.1 Model Capability 57 10.3.2 Model Format and Data Type 58 10.3.3 Model Aggregation . 58 10.4 Model Specific Recommendations 59 10.4.1 Load Flow Models 59 10.4.2 Short-Circuit Models 59 10.4.3 Protection System Models . 59 10.4.4 Insulation Coordination Relat

28、ed Models 60 10.4.5 Electromechanical Transient Models . 60 10.4.6 Electromagnetic Transient Models 61 10.4.7 Power Quality Models 62 10.5 Model Validation 62 10.6 Compliance Simulation 64 10.7 Outputs/Results . 64 10.7.1 Model Data . 64 10.7.2 Model Documentation 65 10.7.3 Model Example 65 10.7.4 M

29、odel Compliance Documentation 65 10.7.5 Model Validation Documentation Model Final Version . 65 10.7.6 Model Guarantee . 66 11 HVDC Grid System Integration Tests 66 Bibliography 67 PD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 5 European foreword This document (CLC/TS 50654-1:2018) has been prepared

30、 by CLC/TC8X/WG 06 “System Aspects of HVDC Grid”. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. PD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 6

31、 Introduction HVDC Grid Systems are a new field of technology. There are very few systems with a small number of converter stations in operation; some more are in execution or in detailed planning. The Guidelines and Parameter Lists to Functional Specifications are presented featuring planning, spec

32、ification and execution of multi-vendor HVDC Grid Systems in Europe. Being elaborated by a team of experts from leading manufacturers of HVDC technology, Transmission System Operators (TSOs), Academia and Institutions in Europe, the present document provides a commonly agreed basis for an open marke

33、t of compatible equipment and solutions for HVDC Grid Systems. Executing such systems and gaining operational experience is seen an important prerequisite for developing corresponding technical standards in the future. By elaborating this document, special care has been taken to as far as possible d

34、escribe the requirements in a technologically independent way. In order to achieve that, a function of interest is described by a comprehensive set of parameters. The parameters are selected based on a systematic analysis of physical phenomena relevant to achieve the requested functionality. The phy

35、sical phenomena are categorized in order to show the mutual dependence of the individual parameters and ensure completeness of the physical aspects to be considered. Based on a clearly defined common language describing the functionalities requested, existing technologies can be applied or new dedic

36、ated technical solutions can be developed. Reflecting the early stage of technology, these Guidelines and Parameter Lists to Functional Specifications need comprehensive explanations and background information for the technical parameters. This dual character of the content will be represented by tw

37、o corresponding parts: Part I “Guidelines” containing the explanations and the background information in context with the Parameter Lists. Part II “Parameter Lists” containing the essential lists of parameters and values describing properties of the a.c. respectively d.c. system (operating condition

38、s) and parameters describing the performance of the newly installed component (performance requirements). PD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 7 1 Scope 1.1 General These Guidelines and Parameter Lists to Functional Specifications describe specific functional requirements for HVDC Grid Syst

39、ems. The terminology “HVDC Grid Systems” is used here describing HVDC systems for power transmission having more than two converter stations connected to a common d.c. circuit. While this document focuses on requirements, that are specific for HVDC Grid Systems, some requirements are considered appl

40、icable to all HVDC systems in general, i.e. including point-to-point HVDC systems. Existing IEC, Cigr or other documents relevant have been used for reference as far as possible. Corresponding to electric power transmission applications, this document is applicable to high voltage systems, i.e. .onl

41、y nominal d.c. voltages equal or higher than 50 kV with respect to earth are considered in this document. NOTE While the physical principles of d.c. networks are basically voltage independent, the technical options for designing equipment get much wider with lower d.c. voltage levels, e.g. in case o

42、f converters or switchgear. Both parts have the same outline and headlines to aid the reader. 1.2 About the Present Release The present release of the Guidelines and Parameter Lists for Functional Specifications describes technical guidelines and specifications for HVDC Grid Systems which are charac

43、terized by having exactly one single connection between two converter stations, often referred to as radial systems. When developing the requirements for radial systems, care is taken not to build up potential show-stoppers for meshed systems. Meshed HVDC Grid Systems can be included into this speci

44、fication at a later point in time. The Guidelines and Parameter List to the Functional Specification of HVDC Grid Systems cover technical aspects of Coordination of HVDC Grid and a.c. Systems HVDC Grid System Characteristics HVDC Grid System Control HVDC Grid System Protection Models and Validation

45、Beyond the present scope, the following aspects are proposed for future work: AC/DC converter stations HVDC Grid System Equipment HVDC Grid System Integration Tests 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable

46、for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 62747:2014, Terminology for voltage-sourced converters (VSC) for high-voltage direct current (HVDC) systems (IEC 627

47、47:2014) EN 60909 (all parts), Short-circuit currents in three-phase A.C. systems PD CLC/TS 50654-1:2018CLC/TS 50654-1:2018 (E) 8 EN 61660-1:1997, Short-circuit currents in d.c. auxiliary installations in power plants and substations Part 1: Calculation of short-circuit currents (IEC 61660-1:1997) 3

48、 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org

49、/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1.1 AC/DC converter unit indivisible operative unit comprising all equipment between the point of connection on the a.c. side and the point of connection on the d.c. side, essentially one or more converters, together with converter transformers, control equipment, essential protective and switching devices and auxiliaries, if any, used for conversion SOURCE: EN 62747:2014, modified The definition was neutralised with respect to technology (not only VSC conver