BS ISO 28560-3-2014 Information and documentation RFID in libraries Fixed length encoding《信息和文献 图书馆的射频识别(RFID) 固定长度编码》.pdf

《BS ISO 28560-3-2014 Information and documentation RFID in libraries Fixed length encoding《信息和文献 图书馆的射频识别(RFID) 固定长度编码》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 28560-3-2014 Information and documentation RFID in libraries Fixed length encoding《信息和文献 图书馆的射频识别(RFID) 固定长度编码》.pdf（36页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS ISO 28560-3:2014Information anddocumentation RFID inlibrariesPart 3: Fixed length encodingBS ISO 28560-3:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of ISO 28560-3:2014.It supersedes BS ISO 28560-3:2011 which is withdrawn.The UK pa

2、rticipation in its preparation was entrusted to TechnicalCommittee IDT/2/7, Computer applications in Information andDocumentation.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions

3、of a contract. Users are responsible for its correctapplication. The British Standards Institution 2014. Published by BSI StandardsLimited 2014ISBN 978 0 580 84883 4ICS 35.040; 35.240.30Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was publishe

4、d under the authority of theStandards Policy and Strategy Committee on 31 August 2014.Amendments issued since publicationDate Text affectedBS ISO 28560-3:2014 ISO 2014Information and documentation RFID in libraries Part 3: Fixed length encodingInformation et documentation RFID dans les bibliothques

5、Partie 3: Encodage de longueur fixeINTERNATIONAL STANDARDISO28560-3Second edition2014-08-15Reference numberISO 28560-3:2014(E)BS ISO 28560-3:2014ISO 28560-3:2014(E)ii ISO 2014 All rights reservedCOPYRIGHT PROTECTED DOCUMENT ISO 2014All rights reserved. Unless otherwise specified, no part of this pub

6、lication may be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below or ISOs member body in the cou

7、ntry of the requester.ISO copyright officeCase postale 56 CH-1211 Geneva 20Tel. + 41 22 749 01 11Fax + 41 22 749 09 47E-mail copyrightiso.orgWeb www.iso.orgPublished in SwitzerlandBS ISO 28560-3:2014ISO 28560-3:2014(E) ISO 2014 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope . 1

8、2 Normative references 13 Terms and definitions . 14 Requirements 34.1 Data elements 34.2 RFID air interface 34.3 Data protocol 35 General encoding rules 35.1 Distinguishing from other applications and encodings . 35.2 Writing/reading direction . 35.3 Memory area layout 45.4 Strings and integers 45.

9、5 Writing the tag . 55.6 Reading optimization 55.7 Profiling . 55.8 Locking . 55.9 Migration 56 Data elements 57 Data blocks . 87.1 Types of data blocks . 87.2 Basic block 97.3 Special blocks 107.4 Structured extension blocks . 117.5 Library extension block 127.6 Acquisition extension block 127.7 Li

10、brary supplement block 137.8 Title block . 147.9 ILL block 147.10 Unstructured extension blocks 15Annex A (informative) Information about ISO 28560 RFID in libraries .16Annex B (informative) Encoding examples .17Annex C (normative) Cyclic redundancy check (CRC) .21Annex D (informative) Reading optim

11、ization 22Annex E (informative) Guidelines for regional profiling 23Bibliography .24BS ISO 28560-3:2014ISO 28560-3:2014(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International S

12、tandards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, als

13、o take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. I

14、n particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives). Attention is drawn to the possibility that some of the elemen

15、ts of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received

16、(see www.iso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adheren

17、ce to the WTO principles in the Technical Barriers to Trade (TBT) see the following URL: Foreword - Supplementary informationThe committee responsible for this document is ISO/TC 46, Information and documentation, Subcommittee SC 4, Technical interoperability. This second edition cancels and replace

18、s the first edition (ISO 28560-3:2011), of which it constitutes a minor revision.ISO 28560 consists of the following parts, under the general title Information and documentation RFID in libraries: Part 1: Data elements and general guidelines for implementation Part 2: Encoding of RFID data elements

19、based on rules from ISO/IEC 15962 Part 3: Fixed length encodingThe following parts are under preparation: Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory Technical Specificationiv ISO 2014 All rights reservedBS ISO 28560-3:2014ISO 28560-3:20

20、14(E)IntroductionLibraries are implementing radio frequency identification (RFID) as item identification to replace bar codes. RFID streamlines applications like user self-service, security, and materials handling. A standard data model for encoding information on RFID tags could increase the cost-e

21、ffectiveness of the technology within libraries, particularly through greater interoperability of RFID tags and equipment, and enhance support for resource sharing between libraries.Several countries have undertaken preliminary work on standardization. The Netherlands developed a data model for publ

22、ic libraries and in Denmark “RFID Data Model for Libraries” has been published (DS/INF 163-1). Finland has adopted the Danish model, but with a few changes. There is a French data model that differs from the Danish and Dutch models. Other libraries in different parts of the world have installations

23、based on various proprietary systems offered by technology and library system suppliers. All of these constitute the installed base of RFID systems, but only account for a small minority of the total of libraries globally.There is an opportunity to develop a standard data model, taking into account

24、the lessons learned from the national schemes and vendor solutions, and provide migration options for those libraries that have already invested in the technology. Because new items are continually being purchased, a number of migration options can be adopted based on factors relevant to each librar

25、y.This part of ISO 28560 deals with the encoding of a basic set of data elements in a fixed length format and the rest of the data elements in optional extension blocks. ISO 28560-1 defines the set of mandatory and optional data elements.ISO 28560-2 and this part of ISO 28560 are mutually exclusive

26、with respect to an RFID tag being applied to a loan item. In other words, the RFID tag is encoded according to the rules of this part of ISO 28560, or to the rules of ISO 28560-2, or to some proprietary rules. Depending on the technologies being used, and other features of tags that are claiming com

27、pliance with ISO 28560-2, the reading system might achieve a degree of interoperability.This International Standard provides essential standards-based information about RFID in libraries. Ongoing advice needs to be provided because of the evolving nature of RFID technology, and the opportunities to

28、migrate between different types of legacy system and encoding rules of this International Standard. ISO 2014 All rights reserved vBS ISO 28560-3:2014BS ISO 28560-3:2014Information and documentation RFID in libraries Part 3: Fixed length encoding1 ScopeThis part of ISO 28560 provides a data model and

29、 encoding rules for the use of radio frequency identification (RFID) tags for items appropriate for the needs of all types of libraries (including national, academic, public, corporate, special, and school libraries).This part of ISO 28560 specifies the rules for encoding a subset of data elements t

30、aken from the total set of data elements listed in ISO 28560-1 into a basic block, and other data elements into extension blocks onto the RFID tag.A source of additional information about implementation issues is provided in Annex A.2 Normative referencesThe following documents, in whole or in part,

31、 are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 28560-1, Information and documentation RFID in li

32、braries Data elements and general guidelines for implementationISO/IEC 10646, Information technology Universal Coded Character Set (UCS)ISO/IEC 18000-3, Information technology Radio frequency identification for item management Part 3: Parameters for air interface communications at 13,56 MHzISO/IEC 1

33、8046-3, Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performanceISO/IEC TR 18047-3, Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,

34、56 MHz3 Terms and definitionsFor the purposes of this document, the terms and definitions given in ISO 28560-1 and the following apply.3.1basic blockdata block occupying the first 272 bits of the RFID tagNote 1 to entry: If the RFID tag is limited to 256 bits (i.e. 32 bytes), the basic block is trun

35、cated.INTERNATIONAL STANDARD ISO 28560-3:2014(E) ISO 2014 All rights reserved 1BS ISO 28560-3:2014ISO 28560-3:2014(E)3.2byte8-bit bytegroup of eight consecutive bitsNote 1 to entry: A byte can represent one character (3.3) or be part of a representation of a character.3.3characterone or more bytes (

36、3.2)3.4CRCcyclic redundancy checkvalue calculated from the data on the tag3.5data blockcontainer for encoding data elements, CRC (3.4), filler, and end mark3.6end blockdata block (3.5) containing the end mark terminating the information on the RFID tag3.7extension blockoptional data block (3.5) foll

37、owing the basic block (3.1)3.8fieldentry in a data block (3.5)3.9filler data blockoptional data block (3.5) that can be inserted to align other data blocks on page (3.11) boundaries3.10fixed length fieldfield (3.8) of prescribed size in a data block (3.5)3.11pageminimum data unit that can be read fr

38、om or written to a tagNote 1 to entry: This is measured in bytes (3.2).3.12stringsequence of characters (3.3)3.13unsigned integerbinary value of a number of consecutive bits3.14variable length fieldfield (3.8) of variable size in a data block (3.5)2 ISO 2014 All rights reservedBS ISO 28560-3:2014ISO

39、 28560-3:2014(E)4 Requirements4.1 Data elementsThe data elements shall be as defined and compliant with those listed in ISO 28560-1.NOTE There is a degree of flexibility in using locally defined codes that enable enhancements and variations to be implemented while still complying with the basic set

40、of data elements.4.2 RFID air interface4.2.1 Air interface conformanceThe air interface for compliant tags shall be in accordance with the specification for Mode 1.For migration purposes, additional non-compliant air interfaces used in legacy systems can be supported during a transition period, whic

41、h is permitted to remain in place for years, as necessary.The air interface conformance shall be tested in accordance with ISO/IEC TR 18047-3.4.2.2 Tag performanceWhere there are requirements for test tag performance, these shall be performed in accordance with ISO/IEC 18046-3.4.3 Data protocolThe f

42、ixed length encoding described in this part of ISO 28560 does not require a separate data protocol.5 General encoding rules5.1 Distinguishing from other applications and encodingsThe value of the application family identifier (AFI) is used to distinguish tags for library applications from other appl

43、ications. The values of AFI for library applications are defined in ISO 28560-1.ISO 28560-1 describes how the data storage format identifier (DSFID), if present in the system memory as a programmable register, is used to distinguish tags in the library application area, i.e. with the same AFI.Tags e

44、ncoded according to this part of ISO 28560 shall be programmed with the value 3EHEXin the DSFID register if the tag contains a programmable DSFID register.This part of ISO 28560 is not able to encode the DSFID if the tag does not contain a programmable DSFID register. In this case, ISO 28560-2 encod

45、es the DSFID in the first byte of the working area of the tag. To take this situation into account, the content parameter (see Table 1) shall not take the value 6 on RFID tags encoded according to this part of ISO 28560.If and only if the tag does not contain a programmable DSFID register, it is per

46、missible to distinguish tags encoded according to this part of ISO 28560 from other encodings by verifying the cyclic redundancy check (CRC) encoded in the basic block (see 7.2).5.2 Writing/reading directionData shall be written to and read from the tag as specified in ISO/IEC 18000-3, Mode 1, such

47、that the first bit transmitted to or from the tag is the least significant bit of the first field of the basic block. This field contains the content parameter (see Table 1). From that starting point, bytes are transmitted to or from ISO 2014 All rights reserved 3BS ISO 28560-3:2014ISO 28560-3:2014(

48、E)the tag in order from left to right, with byte 0 to the left of bytes 1, 2, and 3, as shown in the memory map in Annex B.5.3 Memory area layout5.3.1 SpecificationsThe memory area shall be encoded starting with a basic block with fixed length encoding of a basic set of data elements for use in the

49、library.If the size of the RFID tag is limited to 256 bits (32 bytes), the RFID tag can only contain a truncated basic block.If the size of the RFID tag is greater than 256 bits, extension blocks (structured or unstructured) can be inserted after the basic block up to the capacity of the chip. If extension blocks are inserted, the order of these is optional. The length of an extension block is determined by the first byte of the block. The type of extension block is defined in the following two bytes.Filler data blocks m