BS ISO 2017-1-2005 Mechanical vibration and shock - Resilient mounting systems - Technical information to be exchanged for the application of isolation systems《机械振动和冲击 弹性安装系统 用于交换的.pdf

《BS ISO 2017-1-2005 Mechanical vibration and shock - Resilient mounting systems - Technical information to be exchanged for the application of isolation systems《机械振动和冲击 弹性安装系统 用于交换的.pdf》由会员分享，可在线阅读，更多相关《BS ISO 2017-1-2005 Mechanical vibration and shock - Resilient mounting systems - Technical information to be exchanged for the application of isolation systems《机械振动和冲击 弹性安装系统 用于交换的.pdf（26页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 2017-1:2005 Mechanical vibration and shock Resilient mounting systems Part 1: Technical information to be exchanged for the application of isolation systems ICS 17.160 BS ISO 2017-1:2005 This British Standard was published under the authority of the Standards Policy and Strat

2、egy Committee on 23 February 2005 BSI 23 February 2005 ISBN 0 580 45548 3 National foreword This British Standard reproduces verbatim ISO 2017-1:2005 and implements it as the UK national standard. It supersedes BS 6414:1983 which is withdrawn. The UK participation in its preparation was entrusted by

3、 Technical Committee GME/21, Mechanical vibration and shock, to Subcommittee GME/21/5, Vibration of machines, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement

4、international publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to

5、include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any e

6、nquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blan

7、k page, pages 1 to 17 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date Comments Reference number ISO 2017-1:2005(E)INTERNATIONAL STANDARD ISO 2017-1 First edition 2005-02-01 Mechanical

8、 vibration and shock Resilient mounting systems Part 1: Technical information to be exchanged for the application of isolation systems Vibrations et chocs mcaniques Systmes de montage rsilients Partie 1: Informations techniques changer pour lapplication des systmes disolation BSISO20171:2005IS-7102

9、O1:(5002E) DPlcsid Fremia ihTs PDF file mya ctnoian emdebt dedyfepcaes. In ccacnadrow eitA hebods licnesilop gnic,y tihs file mirp eb yatnde iv roweb detu slahl ton ide ebtlnu deess teh typfecaes wihce era hml era deddebicsnede ti dna onstlalde t noeh comuptfrep reromign tide ehtin.g In wodlnidaot g

10、nihs fil,e trapise atpecc tiereht nser ehnopsiiblity fo nto ifnriigngn Aebods licnesilop gnic.y ehT ISO tneClar Secrteirata caceptl on siibality in this .aera Ai ebods a tedarmfo kra Aebod SystemI snctaropro.de teDials fo teh sfotwcudorp erats sut deo crtaee tihs PDF file cna f ebi dnuon tlareneG eh

11、 Ifnler oatit evt oeh file; tP ehDc-Frtaeino marapteres wtpo ereimizf deirp rotni.gn Evc yresah era t neebakt nesne ot erutah teh fili es siutlbaf eosu rI yb eSO memdob rebeis. In tlnu ehikletneve y ttah lborp aem lertait gno it is f,dnuo plsaee ifnrom ttneC ehlar Secterirata ta teh serddaig sleb ne

12、vwo. ii BSISO20171:2005 iiiContents Page Foreword iv Introduction v 1 Scope 1 2 Normative references . 1 3 Terms and definitions. 2 4 Purpose of vibration isolation (why isolate mechanical systems) 2 5 What is to be isolated . 3 5.1 Source isolation 3 5.2 Receiver isolation . 3 6 Applicability of vi

13、bration isolation (when to isolate structures or mechanical systems). 3 7 Measurement and evaluation of vibration conditions. 4 8 Information for the choice of an isolation mounting system . 4 9 Information to be supplied by the producer of the source or receiver . 4 9.1 General. 4 9.2 Information t

14、o be supplied by the source producer 5 9.3 Information to be supplied by the receiver producer 6 10 Information to be supplied by the customer7 10.1 Information to be supplied by the user of the source. 7 10.2 Information to be supplied by the user of the receiver. 8 11 Information to be provided by

15、 the supplier of the isolation system . 8 11.1 Physical data of the isolation system. 8 11.2 Dynamic behaviour. 9 11.3 Durability 9 11.4 Environmental data. 9 11.5 Maintenance data 10 12 Guidelines for the validation of isolation performance 10 Annex A (informative) Elements for vibration isolation

16、. 11 Bibliography . 17 BSISO20171:2005iv Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member b

17、ody interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electro

18、technical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted

19、by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent r

20、ights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 2017-1 was prepared by Technical Committee ISO/TC 108, Mechanical vibration and shock. This first edition of ISO 2017-1, together with ISO 2017-2, cancels and replaces ISO 2017:1982, which has been technicall

21、y revised. ISO 2017 consists of the following parts, under the general title Mechanical vibration and shock Resilient mounting systems: Part 1: Technical information to be exchanged for the application of isolation systems Part 2: Technical information to be exchanged for the application of vibratio

22、n isolation associated with railway systems BSISO20171:2005 vIntroduction This International Standard is limited to the consideration of resilient devices. Some suppliers of shock and vibration isolators (resilient mounts) have experience covering a wide variety of applications. In most instances, t

23、hey are willing to use this background information for solving the users problems with isolators. However, it is frequently difficult for the supplier to provide this service, because the customer, the user or the producer of the vibration source or receiver has not furnished sufficient information

24、regarding the application. On the other hand, the user is sometimes handicapped in applying isolators properly because the supplier does not furnish sufficient technical information. Consequently, the users must conduct their own experimental evaluation of the isolator and may unknowingly duplicate

25、work already carried out by the supplier. With some vibration sources or receivers, the producer provides the isolating system. To do that, the producer needs all the information from the customer relating to the future application, site and environment. This International Standard is intended to se

26、rve as guide for the exchange of technical information between the customer, the supplier of resilient devices, and the producer of vibration sources or receivers, as required for their proper application. BSISO20171:2005 1Mechanical vibration and shock Resilient mounting systems Part 1: Technical i

27、nformation to be exchanged for the application of isolation systems 1 Scope This part of ISO 2017 establishes requirements to ensure the appropriate exchange of information between users, manufacturers and suppliers of vibration sources and receivers regarding the application of isolation systems. T

28、he sources and the receivers can be machines, structures, people or sensitive equipment subjected to vibrations and shocks generated by machines, railways, road traffic and other external and internal sources where the vibrations are usually transmitted through the ground to a building. This part of

29、 ISO 2017 is applicable to the use of new products (source or receiver), and can also be applied to previously installed products when the user wishes to solve a newly arisen vibration problem. It is not to be considered as a manual for the design or installation of an isolation system. Examples of

30、elements of vibration isolation are shown in Annex A, for information only. This part of ISO 2017 is intended to provide appropriate responses to questions highlighted by the producer and users (e.g. why, what, when and how to isolate mechanical systems). 2 Normative references The following normati

31、ve documents are indispensable for the application of this document. For dated references only the edition cited applies. For undated references, the latest edition of the referenced document ( including any amendments) applies. ISO 2041:1990, Vibration and shock Vocabulary ISO 9688:1990, Mechanical

32、 vibration and shock Analytical methods of assessing shock resistance of mechanical systems Information exchange between suppliers and users of analyses ISO 10846-4:2003, Acoustics and vibration Laboratory measurement of vibro-acoustic transfer properties of resilient elements Part 4: Dynamic stiffn

33、ess of elements other than resilient supports for translatory motion BSISO20171:20052 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 2041, ISO 9688 and ISO 10846-4 and the following apply. 3.1 resilient device flexible element or system used between

34、 an equipment item and its supporting structure to attenuate the transmission of shock or vibration from the equipment to the structure or from the structure to the equipment 3.2 vibration source simple or multiple solid, liquid or gaseous body causing vibration in its environment NOTE This covers s

35、ources such as machinery, traffic, explosions, wave loading and wind loading. 3.3 vibration receiver all structures or elements of structures responding to vibration energy emitted by an internal or external source 3.4 customer user or purchaser of a product (building, machine, etc.) 3.5 producer pa

36、rty constructing or manufacturing a product that needs to be isolated from internal or external vibration 3.6 isolation supplier party responsible for providing and installing an isolation system which will meet the requirements to reduce vibration as agreed upon with the customer NOTE 1 In certain

37、cases, the producer and the supplier may be the same party. NOTE 2 The customer, the producer or the supplier may each mandate subcontractors to execute the work or to purchase elements. From a legal point of view, all three remain responsible in the case of failure of the project. 4 Purpose of vibr

38、ation isolation (why isolate mechanical systems) The purpose of vibration isolation is to protect people and mechanical systems from vibrations and shocks by taking action on the source or the receiver of the vibration. The purpose may include assurance of the following: a) the safety of the industr

39、ial building containing the vibrating equipment itself; b) the safety and comfort of the operators of the vibrating machine; c) the safety and comfort of bystanders near the vibrating machine; d) the security of a building located close to a source of vibration, such as an industrial plant or railwa

40、y; e) the comfort of people in temporary or permanent habitations that may be subject to vibration excitation; f) the security of sensitive equipment in buildings; g) the correct operation of the isolated equipment; h) meeting regulatory requirements. BSISO20171:2005 35 What is to be isolated 5.1 So

41、urce isolation The purpose in this case is the protection of the environment in the vicinity of a vibrating source by modifying the input at the source level. This may include a) isolation of the machine emitting vibrations, b) isolation of the rail track and surrounding subsystems, such as the soil

42、 systems for new and existing railways, and c) isolation of the road embankment and viaducts for highways and removal (suppression) of irregularities. 5.2 Receiver isolation Where source isolation is impossible or impractical (i.e. environmental sources), as for railways or road traffic, or where so

43、urce isolation has proved unsatisfactory, receiver isolation is applied. Sometimes it is an economical compromise. It may include applying isolation to a) a machine operators workstation, b) a new building or elements of the building in the neighbourhood of a railway, tunnel, or heavy traffic roadwa

44、y, c) a sensitive building (concert halls, laboratories, or sensitive installations), d) the support of sensitive equipment (laser tables, computer discs, electronic microscopes, etc.), and e) isolation from environmental sources. 6 Applicability of vibration isolation (when to isolate structures or

45、 mechanical systems) A vibration isolation system may be used additionally to design measures for reducing vibration. It shall not be substituted for such measures, but it may be applied as follows: a) when vibrating machines are designed or installed; b) when constructions, installations or buildin

46、gs containing vibrating machines are designed or modified; c) when vibrating sources are displaced or modified; d) when structure-borne noises occur; e) when designing and constructing buildings, especially sensitive ones in the neighbourhood of railways or high-traffic roads; f) when designing or o

47、rdering sensitive equipment; g) when receiving complaints from people working or living in the area of vibration sources; h) when the limiting values specified in legislation for vibration are exceeded. BSISO20171:20054 7 Measurement and evaluation of vibration conditions In order to choose the corr

48、ect isolation mounting system, it is necessary to make prior measurement and evaluation of vibration in the site. Measurements shall be made under the environmental conditions relevant for the location of the source or receiver. The measurements and analysis should help to provide an understanding o

49、f the origin of the problem and possibly give an indication of the solutions. Measurements shall be made in accordance with an appropriate standard and this standard shall be identified. The measuring position shall be defined in a contract, and the mounting points of transducers and the directions of measurements shall be reported. These measurements shall include time history monitoring over a sufficiently long period to cover the working cycle of