BS ISO 10349-1-2002 Photography - Photographic-grade chemicals - Test methods - General《摄影术 摄影级化学药品 试验方法 第1部分 总则》.pdf

《BS ISO 10349-1-2002 Photography - Photographic-grade chemicals - Test methods - General《摄影术 摄影级化学药品 试验方法 第1部分 总则》.pdf》由会员分享，可在线阅读，更多相关《BS ISO 10349-1-2002 Photography - Photographic-grade chemicals - Test methods - General《摄影术 摄影级化学药品 试验方法 第1部分 总则》.pdf（18页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS ISO 10349-1:2002 Photography Photographic-grade chemicals Test methods Part 1: General ICS 37.040.30 BS ISO 10349-1:2002 This British Standard, having been prepared under the direction of the Consumer Products and Services Sector Policy and Strategy Committee, was published under

2、 the authority of the Standards Policy and Strategy Committee on 25 November 2002 BSI 25 November 2002 ISBN 0 580 40807 8 National foreword This British Standard reproduces verbatim ISO 10349-1:2002 and implements it as the UK national standard. The UK participation in its preparation was entrusted

3、to Technical Committee CPW/42, Photography, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international publications referred to in this document may be found

4、in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are respons

5、ible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the

6、 UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the ISO title page, pages ii to v, a blank page, pages 1 to 8, an inside back cover and a back cover. The BSI

7、copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsINTERNATIONAL STANDARD ISO 10349-1 Second edition 2002-11-01 Reference number ISO 10349-1:2002(E) Photography Photographic-grade chemicals Test methods Par

8、t 1: General Photographie Produits chimiques de qualit photographique Mthodes dessai Partie 1: GnralitsBSISO103491:2002ISO -94301:1)E(2002 ii ISO 2002 Ar llithgr seresvde FDP dicslaimre This FDP fam elitnoc yt deddebme niayfep.seca In roccatiw ecnadA hycilop gnisnecil sebod, thf sim eliarp eb ytniei

9、v ro dewb detu sllah ton eb tidesselnu de tt ehyfepseca hwich rae meil era deddebct desneo tsni dnalat no delmoc ehtupre epfrromign tide ehti.gn In odaolnwt gnidhis file, rapticca setpe trehiet neh serilibisnopty fo ton fnirisebodA gnign ilop gnisnecilcy. TI ehSO tneCraceS lrteraiat catpecon s illib

10、aity in this aera. ebodA si t armedarak fo dAS ebotsysme Inroctarop.de teDailfo s tfos ehtware prtcudos t desuo crtaet ehFDP si ff eb nac elit ni dnuoG ehlarene Info talerive to tf eh;eli teh PDF-rctaerap noimateers weer tpof dezimior rptnii.gn vErec yaeeb sah ert nakt neo rusnet etah tf ehi elis ti

11、usbaf elob esu ry ISO merebm seidob. In the kilnuley evtne ttah a borpmel talerign to ti f si,dnuo saelpfni eorm teh tneCS laretercratai ta thserdda es igvne olebw. ISO 2002 Ar llieser sthgrvsselnU .de torehceps esiwfi,dei rap ont iht fos bupliactim noarper eb yro decudo tuzilina ni dey form b roy n

12、asnaem y, tcelernahcem ro cinoicla, inclidung tohppocoying m dnaicrfomli, tiwtuoh permini noiss wrtif gnirmo ietI rehSO ta tserdda eheb slow or SIsO memreb ydob in toc ehtnury fo tr ehtseuqeer. ISO copyrithg fofiec tsop esaCael 65 G 1121-HCeneva 02 Te.l + 22 14 10 947 11 Fax + 14 47 2290 9 74 E-liam

13、 copyrightsio.ch Web wwwsi.oc.h Prni detni Sztiwerldna BSISO103491:2002iiOSI -943012002:1)E( ISO 2002 r llAithgs reservde iii Contents Page 1 Scope . 1 2 Normative references . 1 3 Term and definition . 2 4 Safety and operational precautions 2 5 Requirements for reagents . 3 6 Glassware . 3 7 Sampli

14、ng of solids and liquids 4 8 Masses and volumes 4 9 Common laboratory procedures . 5 Annex A International Standards on the specification of photographic-grade chemicals 7 BSISO103491:2002iiiISO -94301:1)E(2002 vi ISO 2002 Ar llithgr seresvde Foreword ISO (the International Organization for Standard

15、ization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to

16、be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Stand

17、ards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies ca

18、sting a vote. Attention is drawn to the possibility that some of the elements of this part of ISO 10349 may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. International Standard ISO 10349-1 was prepared by Technical Committee ISO/TC

19、42, Photography. This second edition cancels and replaces the first edition (ISO 10349-1:1992), which has been technically revised. ISO 10349 consists of the following parts, under the general title Photography Photographic-grade chemicals Test methods: Part 1: General Part 2: Determination of matte

20、r insoluble in water Part 3: Determination of matter insoluble in ammonium hydroxide solution Part 4: Determination of residue after ignition Part 5: Determination of heavy metals and iron content Part 6: Determination of halide content Part 7: Determination of alkalinity or acidity Part 8: Determin

21、ation of volatile matter Part 9: Reaction to ammoniacal silver nitrate Part 10: Determination of sulfide content Part 11: Determination of specific gravity Part 12: Determination of density Part 13: Determination of pH Annex A of this part of ISO 10349 is for information only. BSISO103491:2002ivOSI

22、-943012002:1)E( ISO 2002 r llAithgs reservde v Introduction This part of ISO 10349 and subsequent parts deal with photographic-grade chemicals and their test methods which are cited in other International Standards for photographic-grade chemicals. Although the ultimate criterion for suitability of

23、a photographic-grade chemical is its successful performance in an appropriate use test, the shorter, more economical test methods described in subsequent parts of ISO 10349, used with those tests included in the specific chemical standards, are generally adequate. Over the past few years, great impr

24、ovements have been made in instrumentation for various analyses. Where such techniques have equivalent or greater precision, they may be used in place of the tests described in the appropriate part of ISO 10349 or in the International Standards for photographic-grade chemicals. Correlation of such a

25、lternative procedures with the given method is the responsibility of the user. Although ISO 10349 is intended for use by individuals with a knowledge of analytical techniques, this may not always be the case. Care has been taken to provide warnings for particularly hazardous materials. General hazar

26、d warnings for chemicals used in ISO 10349 and other associated International Standards are given in the text as a symbol code as a reminder in those steps detailing handling operations. More detailed information regarding hazards, handling and use of these chemicals may be available from the manufa

27、cturer. An index of the most current version of the International Standards dealing with photographic-grade chemicals and test methods is given in annex A. This annex will be updated on a regular basis upon the issue of any revision or addition to ISO 10349 or the chemical specification standards. B

28、SISO103491:2002vANRETNIITOTS LANDNADRA OSI -943012002:1)E( ISO 2002 r llAithgs reservde 1 Photography Photographic-grade chemicals Test methods Part 1: General 1 Scope This part of ISO 10349 specifies criteria for reagents and materials, and addresses a number of general and common aspects involved

29、in performing the tests given in subsequent parts of ISO 10349. Annex A provides an index of the latest versions of International Standards on photographic-grade chemical specifications. 2 Normative references The following normative documents contain provisions which, through reference in this text

30、, constitute provisions of this part of ISO 10349. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this part of ISO 10349 are encouraged to investigate the possibility of applying the most recent edition

31、s of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of currently valid International Standards. ISO 385-1:1984, Laboratory glassware Burettes Part 1: General requirements ISO

32、 648:1977, Laboratory glassware One-mark pipettes ISO 835-1:1981, Laboratory glassware Graduated pipettes Part 1: General requirements ISO 835-2:1981, Laboratory glassware Graduated pipettes Part 2: Pipettes for which no waiting time is specified ISO 835-3:1981, Laboratory glassware Graduated pipett

33、es Part 3: Pipettes for which a waiting time of 15 s is specified ISO 835-4:1981, Laboratory glassware Graduated pipettes Part 4: Blow-out pipettes ISO 1042:1998, Laboratory glassware One-mark volumetric flasks ISO 3696:1987, Water for analytical laboratory use Specification and test methods ISO 478

34、8:1980, Laboratory glassware Graduated measuring cylinders ISO 5667-1:1980, Water quality Sampling Part 1: Guidance on the design of sampling programmes ISO 5667-2:1991, Water quality Sampling Part 2: Guidance on sampling techniques ISO 5667-3:1994, Water quality Sampling Part 3: Guidance on the pre

35、servation and handling of samples ISO 6353-1:1982, Reagents for chemical analysis Part 1: General test methods ISO 6353-2:1983, Reagents for chemical analysis Part 2: Specifications First series BSISO103491:20021ISO -94301:1)E(2002 2 ISO 2002 Ar llithgr seresvde ISO 6353-3:1987, Reagents for chemica

36、l analysis Part 3: Specifications Second series 3 Term and definition For the purposes of this part of ISO 10349, the following term and definition apply. 3.1 photographic-grade chemicals chemicals commonly used in processing sensitized photographic materials, and more particularly those for which t

37、he quality level is so specified as not to affect the fundamental performance of the photographic material 4 Safety and operational precautions 4.1 Hazard warnings Some of the chemicals specified in the test procedures given in subsequent parts of ISO 10349 are caustic, toxic, or otherwise hazardous

38、. Safe laboratory practice for the handling of chemicals requires the use of safety glasses or goggles and, in some cases, other protective apparel such as rubber gloves, face masks and aprons. Specific danger notices are given in the test and footnotes for particularly dangerous materials, but norm

39、al precautions are required during the performance of any chemical procedure at all times. The first time that a hazardous material is noted in the test procedures, the hazard will be indicated by the word “DANGER” followed by a symbol consisting of angle brackets “ ” containing a letter which desig

40、nates the specific hazard. A double bracket “ ” will be used for particularly perilous situations. In subsequent statements involving handling of these hazardous materials, only the hazard symbol consisting of the brackets and letter(s) will be displayed. Furthermore, for a given material, the hazar

41、d symbol will be used only once in a single paragraph. Hazard warning symbols will not be used for common organic solvents when used in quantities of less than 1 litre, unless they are particularly hazardous. Detailed warnings for handling chemicals and their diluted solutions are beyond the scope o

42、f this part of ISO 10349. Employers shall provide training and health and safety information in conformance with legal requirements. The hazard code system used in this part of ISO 10349 is intended to provide information to the users and is not meant for compliance with any legal requirements for l

43、abelling, as these vary from country to country. It is strongly recommended that anyone using these chemicals obtain pertinent information from the manufacturer about the hazards, handling, use and disposal of these chemicals. 4.2 Hazard information code system B Harmful if inhaled. Avoid breathing

44、dust, vapour, mist or gas. Use only with adequate ventilation. C Harmful if contact occurs. Avoid contact with eyes, skin, or clothing. Wash thoroughly after handling. F Will burn. Keep away from heat, sparks and open flame. Use with adequate ventilation. O Oxidizer. Contact with other material may

45、cause fire. Do not store near combustible materials. S Harmful if swallowed. Wash thoroughly after handling. If swallowed, obtain medical attention immediately. S May be fatal if swallowed. If swallowed, obtain medical attention immediately. BSISO103491:20022OSI -943012002:1)E( ISO 2002 r llAithgs r

46、eservde 3 4.3 Critical safety precautions WARNING All pipette operations shall be performed with a pipette bulb or plunger pipette. Safety glasses shall be worn for all laboratory work. 5 Requirements for reagents 5.1 Handling and labelling Reagents shall be handled in conformity with health and saf

47、ety precautions as shown on containers or as given in other sources of such information. Proper labelling of prepared reagents includes the chemical name, date of preparation, expiration date, restandardization date, name of preparer and adequate health and safety precautions. The discharge of reage

48、nts shall comply with applicable environmental regulations. 5.2 Purity Reagents used in the test procedures shall be certified reagent-grade chemicals and shall meet appropriate standards or be chemicals of a purity acceptable for the analysis, in accordance with all parts of ISO 6353. 5.3 Water Whe

49、never water is specified without other qualifiers in the test procedures, only distilled water or water of equal purity shall be used, in accordance with ISO 3696. 5.4 Strength of solutions 5.4.1 Solutions referred to in all instructions shall be of full strength unless dilution is specified. 5.4.2 When a standardized s