BS IEC 60092-305-2002 Electrical installation in ships - Equipment - Accumulator (storage) batteries《船上电气装置 设备 蓄（储存）电池》.pdf

《BS IEC 60092-305-2002 Electrical installation in ships - Equipment - Accumulator (storage) batteries《船上电气装置 设备 蓄（储存）电池》.pdf》由会员分享，可在线阅读，更多相关《BS IEC 60092-305-2002 Electrical installation in ships - Equipment - Accumulator (storage) batteries《船上电气装置 设备 蓄（储存）电池》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS IEC 60092-305: 1980 Electrical installations in ships Part 305: Equipment Accumulator (storage) batteries ICS 29.220.99; 47.020.60 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBS IEC 60092-305:1980 This British Standard, having been prepared under the dir

2、ection of the Electrotechnical Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 27 June 2002 BSI 27 June 2002 ISBN 0 580 39830 7 National foreword This British Standard reproduces verbatim IEC 60092-305:1980 including Amd 1:198

3、9 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee JPEL/18, Electrical installations of ships and of mobile and fixed offshore units, which has the responsibility to: A list of organizations represented on this committee can

4、be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to the old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain id

5、entifiers from both systems. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facili

6、ty of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligati

7、ons. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of p

8、ages This document comprises a front cover, an inside front cover, the IEC title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsBSIEC60

9、092305:1980CONTENTS Page Foreword3 Preface3 Introduction5 Clause 1. Scope5 2. Types of battery5 3. Construction and assembly.5 4. Crates and trays.5 5. Nameplate6 6. Charging facilities.6 BSIEC60092305:1980 BSI27June2002 2BSIEC60092305:1980 BSI27June2002 3BSIEC60092305:1980 BSI27June2002 4BSIEC60092

10、305:1980 BSI27June2002 5Each crate or tray shall be provided with a durable nameplate securely attached, bearing the manufacturers name and address and type designation, the ampere-hour rating at a specific rate of discharge (preferably the one corresponding to the duty for the specific application)

11、 and the specific gravity of the electrolyte (in the case of a lead-acid battery, the specific gravity when the battery is fully charged). Expect whne d aiffneret hcigrang tare is nrassecey nad is psicefide for a patriculra palpitacion, the hcigrang faceitilis ahsll eb cush ahtt eht compeletyl csida

12、hgred abettry can eb ercharge8 ot d0% capacyti wa nihti eprido fo 01 .h Ehca tarce or trya hslal be providde with ud abarle namepltaes euclery tathcade, biraent ghm eanuftcaursre anme aa dnrddess ayt dnep edsignanoit, eht amepre-ruoh ragnit at a specific raet fo sidcahrge (preferalby eht one ocopser

13、rnding to thud ety fot rhps eicefipa cplitacion) dna thps eicefiarg cvity of the letceorlyte i(n the o esacf l aedaica-d batteyr, thps eicefirg civaty whne thb eatteyr is fully hcgraed). Except when a different charging rate is necessary and is specified for a particular application, the charging fa

14、cilities shall be such that the completely discharged battery can be recharged to 80% capacity within a period of 10 h. BSIEC60092305:1980 BSI27June2002 6BS IEC 60092-305: 1980 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible

15、 for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments

16、or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on

17、 the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards p

18、ublications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of th

19、ose that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information servi

20、ces are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchas

21、e price of standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002. Fax: +44 (0)20 8996 7001. Email: membershipbsi-. Information regarding online access to British Standards via British Standards Online can be found at http:/www.bsi- Further inf

22、ormation about BSI is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988

23、no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such

24、 as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Manager. Tel: +44 (0)20 8996 7070. Fax: +44 (0)20 8996 7553. Email: copyrightbsi-.