BS EN ISP 10609-12-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition-.pdf

《BS EN ISP 10609-12-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition-.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10609-12-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service Definition-.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10609-12:1997 Incorporating Amendment No.1 to BS ISO/IEC ISP 10609-12:1994 and Amendment No.2 (renumbers BS as BSEN ISP10609-12: 1997) Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Networ

2、k Service Part12: Definition of profile TC51, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a CSMA/CD LAN The European Standard EN ISP10609-12:1996 has the status of a British Standard ICS 35.100.05BSEN ISP 10609-12:

3、1997 This British Standard, having been prepared under the directionof the Information Systems Technology Assembly,was published underthe authority of the Standards Boardand comesinto effect on 15 July1995 BSI 08-1999 The following BSI references relate to the work on this standard: Committee refere

4、nce IST/6 Draft for comment92/68842 DC ISBN 0 580 24344 3 Committees responsible for this British Standard The preparation of this British Standard was entrusted to Technical Committee IST/6, upon which the following bodies were represented: British Computer Society British Telecommunications plc CC

5、TA (the Government Centre for Information Systems) Digital Equipment Co. Ltd. IBM United Kingdom Ltd. Institution of Electrical Engineers International Computers Limited Logica UK Ltd. Nine Tiles Computer Systems Ltd. Rank Xerox (UK) Ltd. Amendments issued since publication Amd. No. Date Comments 95

6、78 May 1997 Indicated by a sideline in the marginBSEN ISP 10609-12:1997 BSI 08-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP 10609-12 1BSEN ISP 10609-12:1997 ii BSI 08-1999 National foreword This British Standard has b

7、een prepared by Technical Committee IST/6 and is the English language version of EN ISP10609-12 Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connection-mode Network Service Part12: Definition of profile TC51, provision of the OSI

8、 connection-mode Transport Service using theOSI connection-mode Network Service in an End System attached to a CSMA/CD LAN published by the European Committee for Standardization (CEN). It is identical with ISO/IEC ISP10609-12:1994 published by the International Organization for Standardization (ISO

9、) and the International Electrotechnical Commission (IEC). It supersedes DD ENV41103-3:1993, which is withdrawn. This British Standard is published under the direction of the Information Systems Technology Assembly whose Technical Committee IST/6 has the responsibility to: aid enquirers to understan

10、d the text; present to the responsible international committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as oversea

11、s standards, are available from Customer Services, BSI,389 Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does no

12、t of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN ISP titlepage, page2, the ISO/IECISPtitle page, pages ii to iv, pages1to 4 and a back cover. This standard has been updated (see copyright date) and

13、may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP10609-12 January1996 ICS 35.100 Supersedes ENV41103-3:1992 Descriptors: Data processing, information interchange, network interconnect

14、ion, open systems interconnection, local area networks, data transmission, connectionless mode transmission, communication procedure, control procedures, transport layer, network layer, profiles English version Information technology International Standardized Profiles TB, TC, TD and TE Connection-m

15、ode Transport Service over connection-mode Network Service Part12: Definition of profile TC51, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a CSMA/CD LAN (ISO/IEC ISP10609-12:1994) Technologies de linformation Profi

16、ls normaliss internationaux TB, TC, TD et TE Service de transport en mode connexion sur service de rseau en mode connexion Partie12: Dfinition du profil TC51, fourniture du service de transport en mode connexion OSI utilisant le service de rseau en mode connexionOSI dans un systme final atach un RLE

17、 AMDP-DC (ISO/IEC ISP10609-12:1994) This European Standard was approved by CEN on1995-10-04. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date

18、 lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the r

19、esponsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, No

20、rway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1996 All rights of reproduction and communication in any form and by any me

21、ans reserved in all countries to CEN and its members Ref. No. EN ISP10609-12:1996 EENISP10609-12:1996 BSI 08-1999 2 Foreword The text of the International Standard from ISO/IEC/JTC1, Information Technology, of the International Organization for Standardization (ISO) and the International Electrotech

22、nical Commission (IEC) has been taken over as a European Standard by CEN Technical Board. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by July1996, and conflicting national standards shall be with

23、drawn at the latest by July1996. According to CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switz

24、erland and theUnited Kingdom. NOTEEN ISP10609-12 replaces ENV41103-3:1992. For the time being, this document exists in the English version only.ISO/IEC ISP10609-12:1994(E) ii BSI 08-1999 Contents Page Foreword iii Introduction 1 1 Scope 1 1.1 General 1 1.2 Position within the taxonomy 1 1.3 Scenario

25、 1 2 Normative references 2 3 Definitions 2 4 Abbreviations 2 5 Requirements 3 5.1 Static conformance requirements 3 5.2 Dynamic conformance requirements 3 Annex A (normative) ISPICS requirements list 4 A.1 General options of the profile 4 A.2 Standards selected and combined in the profile 4 A.3 Con

26、straints on base standards 4 Figure 1 Scenario of applicability of the TC51 profile 1 Figure 2 Profile protocol stack for a TC51 End System 2ISO/IECISP10609-12:1994(E) BSI 08-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (theInternational Electrotechnical Commiss

27、ion) together form a system for worldwide standardization as a whole. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity.

28、 ISO and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee,

29、 ISO/IEC JTC1. In addition to developing International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standardization (ISO/IEC JTC1/SGFS) for the processing of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized docum

30、ent which identifies a standard or group of standards, together with options and parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires a

31、pproval by at least75% of the national bodies casting a vote. S-liaison may be established with JTC1/SGFS by specialized organizations involved in the work of functional standardization. This part of ISO/IEC ISP10609 was prepared with the collaboration of the following S-liaisons: Asia-Oceania Works

32、hop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Implementors Workshop (OIW). ISO/IEC ISP10609 consists of several parts, under the general title Information technology International Standardized Profiles TB, TC, TD and TE Connection-mode Transport Service over connecti

33、on-mode Network Service: Part1: Subnetwork-type independent requirements for Group TB; Part2: Subnetwork-type independent requirements for Group TC; Part3: Subnetwork-type independent requirements for Group TD; Part4: Subnetwork-type independent requirements for Group TE; Part5: Definition of profil

34、esTB1111/TB1121; Part6: Definition of profilesTC1111/TC1121; Part7: Definition of profilesTD1111/TD1121; Part8: Definition of profilesTE1111/TE1121; Part9: Subnetwork-type dependent requirements for Network Layer, Data Link Layer and Physical Layer concerning permanent access to a packet switched da

35、ta network using virtual calls; Part10: LAN subnetwork-dependent,media-independent requirements; Part11: CSMA/CD LANsubnetwork-dependent, media-dependent requirements; Part12: Definition of profile TC51, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Ser

36、vice in an End System attached to a CSMA/CD LAN; Part14: Definition of profile TC53, provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a Token Ring LAN. This part of ISO/IEC ISP10609 contains one annex, which is normativ

37、e.iv blankISO/IECISP10609-12:1994(E) BSI 08-1999 1 Introduction This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC Technical Report10000, “Information technology Framework and taxonomy of International Standardized Profiles”. The context o

38、f Functional Standardization is one area in the overall field of Information Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Pr

39、ofiles standardize the use of options and other variations in the base standards, and provide a base for the development of uniform, internationally recognized system tests. ISPs are produced not simply to “legitimize” a particular choice of base standards and options, but to promote real system int

40、eroperability. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized test methods. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful re

41、alization of this goal. ISO/IEC ISP10609 consists of several parts, of which this is part12. Parts1 to4 of ISO/IEC ISP10609 specify profile requirements that are subnetwork-independent, for each of the transport groups TB, TC, TD and TE, respectively. There are further parts which specify subnetwork

42、-dependent and media-dependent requirements. In addition, for each individual profile there is a part of ISO/IEC ISP10609 which identifies the specific requirements of that profile, making reference to appropriate material from the relevant subnetwork-independent and subnetwork-dependent parts. This

43、 part identifies the specific requirements for profile TC51. 1 Scope 1.1 General This International Standardized Profile is applicable to End Systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards, which collectively provid

44、e the connection-mode Transport Service using the connection-mode Network Service. This part of ISO/IEC ISP10609 defines the TC51 profile which is applicable to the provision of the OSI connection-mode Transport Service using the OSI connection-mode Network Service in an End System attached to a CSM

45、A/CD LAN subnetwork. 1.2 Position within the taxonomy The taxonomy of profiles is defined in ISO/IEC TR10000-2. This part of ISO/IEC ISP10609 defines theprofile: TC51, Connection-mode Transport Service over connection-mode Network Service over CSMA/CD LAN subnetworks. 1.3 Scenario Figure 1 illustrat

46、es the configurations of systems to which the TC51 profile is applicable. Figure 1 Scenario of applicability of the TC51 profileISO/IECISP10609-12:1994(E) 2 BSI 08-1999 The TC51 profile specifies the required functions from the supporting protocol stack shown in Figure 2 below. This profile does not

47、 specify the required functions for relays. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC ISP10609. At the time of publication, the editions indicated were valid. All documents are subject to rev

48、ision, and parties to agreements based on this part of ISO/IEC ISP10609 are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific to a particular edition. Members of IEC

49、 and ISO maintain registers of currently valid International Standards and ISPs, and ITU-T maintains published editions of its current Recommendations. ISO/IEC TR10000-1:1992, Information technology Framework and taxonomy of International Standardized Profiles Part1: Framework. ISO/IEC TR10000-2:1992, Information technology Framework and taxonomy of International Standardized Profiles Part2: Taxonomy of OSI Profiles. ISO/IEC ISP10609-2:1992, Information technology International Stan