BS EN ISP 10609-10-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service LAN subnet.pdf

《BS EN ISP 10609-10-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service LAN subnet.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10609-10-1995 Information technology International standardized profiles TB TC TD and TE Connection-mode transport service over connection-mode network service LAN subnet.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10608-6:1997 BS ISO/IEC ISP 10608-6:1995 renumbered, Incorporating Amendment No. 1. Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part 6: Definition of profile TA54, operation ove

2、r an FDDI LAN subnetwork The European Standard EN ISP 10608-6:1996 has the status of a British Standard ICS 35.100.05BSENISP10608-6:1997 This British Standard, having been prepared under the directionof the Information Systems Technology Assembly, was published under the authorityof the Standards Bo

3、ardand comes into effect on 15October 1995 BSI 12-1999 The following BSI references relate to the work on this standard: Committee reference IST/6 Draft for comment 93/640755 DC ISBN 0 580 24928 X Committees responsible for this British Standard The preparation of this British Standard was entrusted

4、 to Technical Committee IST/6, Data communications, upon which the following bodies were represented: British Computer Society British Telecommunications plc CCTA (the Government Centre for Information Systems) Digital Equipment Co. Ltd. IBM United Kingdom Ltd. Institution of Electrical Engineers In

5、ternational Computers Limited Nine Tiles Computer Systems Ltd. Logica UK Ltd Rank Xerox (UK) Ltd. Amendments issued since publication Amd. No. Date Comments 9481 May 1997 Indicated by a sideline in the marginBSENISP10608-6:1997 BSI 12-1999 i Contents Page Committees responsible Inside front cover Na

6、tional foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP 10608-6 1BSENISP10608-6:1997 ii BSI 12-1999 National foreword This British Standard has been prepared by Technical Committee IST/6 and is the English language version of EN ISP 10608 Information technology International Standardized Prof

7、ile TAnnnn Connection-mode Transport Service over connectionless-mode Network Service Part 6:1996 Definition of profile TA54, operation over an FDDI LAN subnetwork published by the European Committee for Standardization (CEN). It is identical with ISO/IEC ISP10608-6:1995 published by the Internation

8、al Organization for Standardization (ISO) and the International Electrotechnical Commission. This British Standard is published under the direction of the Information Systems Technology Assembly whose Technical Committee IST/6 has the responsibility to: aid enquirers to understand the text; present

9、to the responsible international/European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, as well as overseas standards

10、, are available from Customer Services, BSI,389Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself

11、confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, theEN ISP title page, page 2, theISO/IECISP title page, pages ii to iv, pages1to5 and a back cover. This standard has been updated (see copyright date) and may have

12、had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10608-6 April 1996 ICS 35.100 Descriptors: Communication procedures, connection-mode, control procedures, data processing, data switching, dat

13、a transfer, definitions, information technology, Lan, local area networks, network interconnection, network layers, network services, OSI, standardized profiles, sub nets, transport, layers, transport services English version Information technology International Standardized Profile TAnnnn Connectio

14、n-mode Transport Service over Connectionless-mode Network Service Part 6: Definition of profile TA54, operation over an FDDI LAN subnetwork (ISO/IEC ISP 10608-6:1995) Technologies de linformation Profil normalis international TAnnnn Service detransport en mode connexion sur service derseau en mode s

15、ans connexion Partie 6: Dfinition du profil TA54 pour opration sur un sous-rseau FDDI RLE (ISO/IEC ISP 10608-6:1995) This European Standard was approved by CEN on 1996-03-26. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Euro

16、pean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English

17、, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finl

18、and, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Bru

19、ssels 1996 Copyright reserved to CEN members Ref. No. EN ISP 10608-6:1996 EENISP10608-6:1996 BSI 12-1999 2 Foreword The text of the International Standard from the Technical Committee ISO/IEC/JTC1, Information technology, of the International Organization for Standardization (ISO) and the Internatio

20、nal Electrotechnical Commission (IEC) has been taken over as a European Standard by the Technical Board of CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October1996. According to CEN/CENELE

21、C Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom.ISO/IECISP10608-6:1995(E) i

22、i BSI 12-1999 Contents Page Foreword iii Introduction 1 1 Scope 1 1.1 General 1 1.2 Position in the taxonomy 1 1.3 Scenario 1 2 Normative references 2 3 Definitions 3 4 Abbreviations 3 5 Requirements 3 5.1 Transport layer 3 5.2 Network layer 3 5.3 Logical Link Control Sublayer (LLC) 4 5.4 Medium Acc

23、ess Control sublayer (MAC) 4 5.5 Physical sublayer (PHY) 4 5.6 Physical Media Dependent sublayer (PMD) 4 5.7 Station Management (SMT) 4 Annex A (normative) ISPICS requirements list 5 A.1 General options of the profile 5 A.2 Standards selected and combined in the profile 5 A.3 Requirements on base st

24、andards 5 Figure 1 Scenario of applicability of the TA54 profile 1 Figure 2 TA54 protocol stack for end systems 2ISO/IECISP10608-6:1995(E) BSI 12-1999 iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Commission) form the specialized sy

25、stem for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committees

26、collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition to deve

27、loping International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard or group of standards

28、, together with options and parameters, necessary to accomplish a function or a set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least 75% of the national bodies cast

29、ing a vote. International Standardized Profile ISO/IEC ISP 10608-6 was prepared with the collaboration of Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Implementors Workshop (OIW). ISO/IEC ISP 10608 consists of several parts, under the general title

30、 Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service: Part 1: General overview and subnetwork-independent requirements; Part 2: TA51 profile including subnetwork-dependent requirements for CSMA/CD Local Area Netw

31、orks (LANs); Part 4: Definition of profile TA53, operation over a Token Ring LAN subnetwork; Part 5: TA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using virtual calls; Part 6: Definition of profile TA54, operation over an FDDI LAN subnetwor

32、k; Part 13: MAC sublayer and physical layer dependent requirements for a Token Ring LAN subnetwork; Part 14: MAC, PHY and PMD sublayer dependent and Station Management requirements over an FDDI LAN subnetwork. Annex A forms an integral part of this part of ISO/IEC ISP 10608.iv blankISO/IECISP10608-6

33、:1995(E) BSI 12-1999 1 Introduction ISO/IEC ISP 10608 is defined in accordance with the principles specified by ISO/IEC TR10000. The context of Functional Standardization is one area in the overall field of Information Technology (IT) standardization activities, covering base standards, profiles, an

34、d registration mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base standards, and provide a basis for the development of uniform, internationally recogniz

35、ed system tests. ISPs are produced not simply to “legitimize” a particular choice of base standards and options, but to promote real system interoperability. One of the most important roles for an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internati

36、onally recognized test methods. The development and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP 10608 consists of several parts, of which this is part6. ISO/IEC ISP 10608-1 specifies the profile requirements which are

37、 independent of the subnetwork and media. There are further parts which specify subnetwork-dependent and media-dependent requirements. In addition, for each individual profile, there is a part of ISO/IEC ISP10608 which identifies the specific requirements of that profile, making reference to appropr

38、iate material from part1and from the subnetwork-dependent parts. 1 Scope 1.1 General ISO/IEC ISP 10608 is applicable to end systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI base standards that collectively provide the connectio

39、n-mode Transport Service using the connectionless-mode Network Service. This part of ISO/IEC ISP 10608 is applicable to the provision of the connection-mode Transport Service in end systems attached to an FDDI LAN subnetwork from which the standardized connectionless-mode Network Service can be made

40、 available. 1.2 Position within the taxonomy The taxonomy of OSI profiles is defined in ISO/IEC TR 10000-2. This part of ISO/IEC ISP 10608 defines the profile: 1.3 Scenario Figure 1 illustrates the end system configurations to which this part of ISO/IEC ISP 10608 is applicable. TA54: Connection-mode

41、 transport service over connectionless-mode network service over an FDDI LAN subnetwork. * Other compatible network equipment none OSI relays Other equipment Figure 1 Scenario of applicability of the TA54 profileISO/IECISP10608-6:1995(E) 2 BSI 12-1999 This part of ISO/IEC ISP 10608 specifies the req

42、uired functions from the supporting protocol stack shown in Figure 2. 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this part of ISO/IEC ISP 10608. At the time of publication, the editions indicated were valid. All d

43、ocuments are subject to revision, and parties to agreements based on this part of ISO/IEC ISP 10608 are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific to a partic

44、ular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and ITU-T maintains published editions of its current Recommendations. ISO 8473:1988, Information processing systems Data communications Protocol for providing the connectionless-made network

45、 service. ISO 8802-2:1989, Information processing systems Local area networks Part 2: Logical link control. ISO 9542:1988, Information processing systems Telecommunications and information exchange between systems End system to Intermediate system routeing exchange protocol for use in conjunction wi

46、th the Protocol for providing the connectionless-mode network service (ISO 8473). ISO 9542:1988/Corr. 1:, Information processing systems Telecommunications and information exchange between systems End System to Intermediate System routeing exchange protocol for use in conjunction with the Protocol f

47、or the providing the connectionless-mode network service (ISO 8473) Technical Corrigendum 1 1) . ISO/IEC TR 9577:1993, Information technology Telecommunications and information exchange between systems Protocol identification in the network layer. ISO/IEC TR 10000-1:1992, Information technology Fram

48、ework and taxonomy of International Standardized Profiles Part 1: Framework. ISO/IEC TR 10000-2:1994, Information technology Framework and taxonomy of International Standardized Profiles Part 2: Principles and Taxonomy for OSI Profiles. ISO/IEC 10039:1991, Information technology Open Systems Interco

49、nnection Local area networks Medium Access Control (MAC) service definition. ISO/IEC ISP 10608-1:1992, Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part 1: General overview and subnetwork-independent requirements. ISO/IEC ISP 10608-2:1992, Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mod