BS EN ISP 10608-4-1997 Information technology International standardized profile TAnnnn Connection-mode transport service over connectionless-mode network service Definition of prow.pdf

《BS EN ISP 10608-4-1997 Information technology International standardized profile TAnnnn Connection-mode transport service over connectionless-mode network service Definition of prow.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10608-4-1997 Information technology International standardized profile TAnnnn Connection-mode transport service over connectionless-mode network service Definition of prow.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10608-4:1997 Information technology International Standardized Profile Tannnn Connection-mode Transport Service over Connectionless-mode Network Service Part 4: Definition of profile TA53, operation over a Token Ring LAN subnetwork ICS 35.100.05BSENISP10608-4:1997 This Bri

2、tish Standard, having been prepared under the directionof the DISC Board, was published under the authority of the Standards Board and comes into effect on 15 April 1997 BSI 12-1998 ISBN 0 580 27280 X National foreword This British Standard is the English language version of EN ISP 10608-4:1996. It

3、is identical with ISO/IEC ISP 10608-4:1994. The UK participation in its preparation was entrusted to Technical Committee IST/6, Data communications, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the

4、 interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request. Cross-references The British Standards which implemen

5、t international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to

6、include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, t

7、heENISPtitlepage, page 2, the ISO/IEC ISP title page, pages ii to iv, pages1to 4, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on theinside front cover. Amendments is

8、sued since publication Amd. No. Date CommentsEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP 10608-4 January 1996 ICS 35.100 Supersedes ENV 41110:1992 Descriptors: See ISO document English version Information technology International Standardized Profile TAnnnn Connection-mode Transport Ser

9、vice over Connectionless-mode NetworkService Part 4: Definition of profile TA53,operation over a Token Ring LAN subnetwork (ISO/IEC ISP 10608-4:1994) Technologie de linformation Profil normalis international TAnnnn Service de transport en mode connexion sur service de rseau en mode sans connexion Pa

10、rtie 4: Dfinition du profil TA53, mise en service sur un sous-rseau LAN en anneau jeton (ISO/IEC ISP 10608-4:1994) This European Standard was approved by CEN on 1995-10-04. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe

11、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. The European Standards exist in three official versions (English, F

12、rench, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark Finland,

13、 France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brusse

14、ls 1996 All rights of reproduction and communication in any form and by any means reserved in all countries to CEN and its members. Ref. No. EN ISP 10608-4:1996 EENISP10608-4:1996 BSI 12-1998 2 Foreword The text of the International Standard from ISO/IEC/JTC 1 “Information Technology” of the Interna

15、tional Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) has been taken over as a European Standard by CEN Technical Board. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorseme

16、nt, at the latest by July 1996, and conflicting national standards shall be withdrawn at the latest by July 1996. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ice

17、land, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of the International Standard ISO/IEC ISP 10608-4:1994 has been approved by CEN as a European Standard without any modification. NOTEEN ISP 10608-4 replaces

18、 ENV 41110:1992 which shall be withdrawn. For the time being, this document exists in the English version only.ENISP10608-4:1996 ii BSI 12-1998 Contents Page Foreword iii Introduction 1 1 Scope 1 1.1 General 1 1.2 Position within the Taxonomy 1 1.3 Scenario 1 2 Normative references 2 3 Definitions 2

19、 4 Abbreviations 2 5 Requirements for Profile TA53 2 5.1 Transport Layer 2 5.2 Network Layer 2 5.3 Logical Link Control Sublayer (LLC) 4 5.4 Medium Access Control Sublayer 4 5.5 Physical Layer 4 Annex A (normative) ISPICS requirements list Inside back cover A.1 General options of the profile Inside

20、back cover A.2 Standards selected and combined in the profile Inside back cover A.3 Constraints on base standards Inside back cover Figure 1 Scenario of applicability of the TA53 profile 1 Table 1 TA53 protocol stack for an End System 2 Descriptors: Data processing, information interchange, network

21、interconnection, open systems interconnection, data transmission, communication procedure, control procedures, transport layer, network layer, profiles.ENISP10608-4:1996 BSI 12-1998 iii Foreword ISO (the International Organization for Standardization) and IEC (the International Electrotechnical Comm

22、ission) form the specialized system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. IS

23、O and IEC technical committees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, IS

24、O/IEC JTC1. In addition to developing International Standards, ISO/IEC JTCI has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a

25、 standard or group of standards, together with options and parameters, necessary to accomplish a function or a set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least

26、75 % of the national bodies casting a vote. International Standardized Profile ISO/IEC ISP 10608-4 was prepared with the collaboration of Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); Open Systems Environment Implementors Workshop (OIW). ISO/IEC ISP 10608 consists of severa

27、l parts, under the general title Information Technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service: Part 1: General overview and subnetwork-type independent requirements; Part 2: TA51 profile including subnetwork-type dependen

28、t requirements for CSMA/CD Local Area Networks (LANs); Part 4: Definition of profile TA53, operation over a Token Ring LAN subnetwork; Part 5: TA1111/TA1121 profiles including subnetwork-type dependent requirements for X.25 packet switched data networks using virtual calls; Part 6: Definition of pro

29、file TA54, operation over an FDDI LAN subnetwork; Part 13: MAC sublayer and physical layer dependent requirements for a Token Ring LAN subnetwork; Part 14: MAC, PHY and PMD sublayer dependent and Station Management requirements for an FDDI LAN subnetwork. Annex A forms an integral part of this part

30、of ISO/IEC ISP 10608.iv blankENISP10608-4:1996 BSI 12-1998 1 Introduction This International Standardized Profile (ISP) is defined in accordance with the principles specified by ISO/IEC Technical Report 10000. The context of Functional Standardization is one area in the overall field of Information

31、Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. A profile defines a combination of base standards that collectively perform a specific well-defined IT function. Profiles standardize, the use of options and other variations in the base stand

32、ards, and provide a basis for the development of uniform, internationally recognized system tests. ISPs are produced not simply to “legitimize” a particular choice of base standards and options, but to promote real system interoperability. One of the most important roles for an ISP is to serve as th

33、e basis for the development (by organizations other than ISO and IEC) of internationally recognized, tests. The development and widespread acceptance of tests based, on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP 10608 consists of several parts of which thi

34、s is part 4. This part of ISO/IEC ISP 10608 defines Profile TA53. Other parts specify the subnetwork-type independent requirements (i.e. Transport Layer requirements), the LAN independent requirements for the Network Layer and the LLC Sublayer, and LAN specific requirements. This part of ISO/IEC ISP

35、 10608 references and, Where necessary, amends other parts that collectively constitute the TA53 profile. 1 Scope 1.1 General ISO/IEC ISP 10608 is applicable to End Systems concerned with operating in the Open Systems Interconnection (OSI) environment. It specifies a combination of OSI standards whi

36、ch collectively provide the connection-mode Transport Service using the connectionless-mode Network Service. This part of ISO/IEC ISP 10608 is applicable to the provision of the connection-mode Transport Service in End Systems attached to a Token Ring LAN subnetwork from which the standardized conne

37、ctionless-mode Network Service can be made available. 1.2 Position within the Taxonomy The taxonomy of profiles is defined inISO/IEC TR 10000-2. This part of ISO/IEC ISP 10608 defines the profile: 1.3 Scenario Figure 1 illustrates the End System configurations to which the TA53 profile is applicable

38、. This part of ISO/IEC ISP 10608 specifies the required functions from the supporting protocol stack shown inTable 1. TA53: Connection-mode Transport Service over connectionless-mode Network Service over a Token Ring LAN subnetwork Figure 1 Scenario of applicability of the TA53 profileENISP10608-4:1

39、996 2 BSI 12-1998 Table 1 TA53 protocol stack for an EndSystem 2 Normative references The following documents contain provisions which, through reference in this text, constitute provisions of this International Standardized Profile. At the time of publication, the editions indicated were valid. All

40、 documents are subject to revision, and parties to agreements based on this International Standardized Profile are warned against automatically applying any more recent editions of the documents listed below, since the nature of references made by ISPs to such documents is that they may be specific

41、to a particular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and CCITT maintains published editions of its current Recommendations. ISO8802-2:1989, Information processing systems Local area networks Part 2: Logical link control. ISO9542:1988

42、, Information processing systems Telecommunications and information exchange between systems End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO 8473). ISO9542:1988/Corr. 1:1991, Information

43、processing systems Telecommunications and information exchange between systems End system to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO8473) Technical Corrigendum 1. NOTEThis Technical Corrigendum

44、 to ISO9542 is to apply throughout in this part of ISO/IEC ISP10608, wherever ISO9542 itself is referenced. ISO/IEC TR9577:1990, Information technology Telecommunications and information exchange between systems Protocol identification in the network layer. ISO/IEC TR10000-1:1992, Information techno

45、logy Framework and taxonomy of International Standardized Profiles Part1:Framework. ISO/IEC TR10000-2:1992, Information technology Framework and taxonomy of International Standardized Profiles Part2:Taxonomy of OSI Profiles. ISO/IEC 10039:1991, Information technology Open Systems Interconnection Loc

46、al area networks Medium Access Control (MAC) service definition. ISO/IEC ISP 10608-1:1992, Information technology International Standardized Profile TAnnnn Connectionmode Transport Service over Connectionless-mode Network Service Part 1: General overview and Subnetwork type independent requirements.

47、 ISO/IEC ISP 10608-2:1992, Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part 2: TA51 profile including subnetwork type dependent requirements for CSMA/CD Local Area Networks (LANs). ISO/IEC ISP 10608-13:19

48、94, Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part 13: MAC sublayer and physical layer dependent requirements for a Token Ring LAN subnetwork. ISO/IEC TR 10735:1993, Information technology Telecommunica

49、tions and information exchange between systems Standard Group MAC Addresses. Additional normative references are found in each of the ISP parts listed above. These additional normative references are base standards used for development of the relevant ISP parts. 3 Definitions All the terms used in this part of ISO/IEC ISP10608 are defined in the base standards that are referenced in clause2. 4 Abbreviations All abbreviations, including acronyms, are used in