BS EN ISP 10608-2-1995 Information technology - International standardized profile TAnnnn - Connection-mode transport service over connectionless-mode network service - TA51 profilr.pdf

《BS EN ISP 10608-2-1995 Information technology - International standardized profile TAnnnn - Connection-mode transport service over connectionless-mode network service - TA51 profilr.pdf》由会员分享，可在线阅读，更多相关《BS EN ISP 10608-2-1995 Information technology - International standardized profile TAnnnn - Connection-mode transport service over connectionless-mode network service - TA51 profilr.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN ISP 10608-2:1995 ISO/IEC ISP 10608-2:1992 Implementation of EN ISP10608-2:1994 Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part2: TA51 profile including subnetwork-dependent require

2、ments for CSMA/CD Local area networks (LANs) UDC 681.3:621.39BSENISP10608-2:1995 This BritishStandard, having been prepared under the directionof the Information Systems Technology Assembly, was published under the authorityof the Standards Boardand comes into effect on 15November1995 BSI 01-2000 Th

3、e following BSI references relate to the work on this standard: Committee reference IST/6 Draft for comment90/668001 DC ISBN 0 580 24882 8 Committees responsible for this BritishStandard The preparation of this BritishStandard was entrusted to Technical Committee IST/6, Data communications, upon whi

4、ch the following bodies wererepresented: British Computer Society British Telecommunications plc CCTA (the Government Centre for Information Systems) Digital Equipment Co. Ltd. IBM United Kingdom Ltd. Institution of Electrical Engineers International Computers Limited Logica UK Ltd. Nine Tiles Compu

5、ters Systems Ltd. Rank Xerox (UK) Ltd. Amendments issued since publication Amd. No. Date CommentsBSENISP10608-2:1995 BSI 01-2000 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 Foreword iii Text of ISO/IEC ISP 10608-2 1BSENISP10608-2:1995 ii BSI 01-2000 Nati

6、onal foreword This BritishStandard is the English language version of EN ISP10608-2:1994 and implements it as the UK national standard. This BritishStandard is published under the direction of the Information Systems Technology Assembly whose Technical Committee IST/6 has the responsibility to: aid

7、enquirers to understand the text; present to the responsible European committee any enquiries on interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK. NOTEInternational and European Standards, a

8、s well as overseas standards, are available from Customer Services, BSI,389 Chiswick High Road, London W44AL. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British

9、 Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, theEN ISP title page, page2, the ISO/IEC ISP title page, pagesii toiv, pages1to8 and a back cover. This standard has been updated (see cop

10、yright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISP10608-2 December1994 ICS 35.100 Descriptors: Data processing, information interchange, network interconnection, open

11、systems interconnection, data transmission, communication procedure, control procedures, transport layer, network layer, profiles English version Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part2: TA51 pr

12、ofile including subnetwork-dependent requirements for CSMA/CD Local Area Networks (LANs) (ISO/IEC ISP10608-2:1992) Technologies de linformation Profil normalis international TAnnnn Service de transport en mode connexion sur le service derseau en mode sans connexion Partie2: Profil TA51 y compris spe

13、cifications dpendentes du sous-rseau pour les rseaux locaux CSMA/CD (ISO/IEC ISP10608-2:1992) Informationstechnik Internationale Profilnorm TAnnnn Verbindungsorientierter Transportdienst ber verbindungslosem Vermittllungsdienst Teil2: Profil TA51 mit Teilnetz-abhngigen Anforderungen fr Lokale Netze

14、(LANs) vom Type CSMA/CD (ISO/IEC ISP10608-2:1992) This European Standard was approved by CEN on1994-12-05. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterati

15、on. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translati

16、on under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, N

17、etherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue de Stassart 36, B-1050 Brussels 1994 Copyright reserved to CEN members Ref. No. EN ISP10608-2:

18、1994 EENISP10608-2:1994 BSI 01-2000 2 Foreword The Technical Board decided to submit the International Standard Information Technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Services Part2:TA51 profile including subnetwork-depende

19、nt requirements for CSMA/CD Local Area Networks (LANs) (ISO/IEC ISP10608-2:1992) for adoption by the Unique Acceptance Procedure (UAP), in accordance with clause4.6 of the CEN/CENELEC Internal Regulations, Part2 of April1990. The result of the Unique Acceptance Procedure waspositive. For the time be

20、ing this standard exists in the English version only. This European Standard and EN ISP10608-1 supersede EN41102:1990 which shall be withdrawn. This document is the second part of a multi-Functional Standard identified in ISO/IEC TR10000-2. In M-IT-02 this standard is identified under “T/A51 Local A

21、rea Networks CSMA/CD (COTS+CLNS)”. M-IT-02 CEN/CENELEC/ETSI Memorandum on taxonomy of profiles and directory of functional standards This European Standard shall be given the status of a National Standard, either by publication of an identical text or by endorsement, at the latest by June1995, and c

22、onflicting national standards shall be withdrawn at the latest by June1995. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Neth

23、erlands, Norway, Portugal, Spain, Sweden, Switzerland, UnitedKingdom.ISO/IEC ISP10608-2:1992(E) ii BSI 01-2000 Contents Page Foreword iii Introduction 1 1 Scope 1 2 Normative references 2 3 Definitions 2 4 Abbreviations 2 5 Profile TA51 CSMA/CD LAN subnetworks 2 Annex A (normative) International Sta

24、ndardized Profile ImplementationConformance Statement Requirements List (IPRL) 5 Annex B (normative) International Standardized Profile ImplementationConformance Statement Requirements List (IPRL) 5 Annex C (informative) Bibliography 8 Figure 1 Standards comprising the TA51 Profile 1 Figure 2 Scenar

25、io of applicability of the TA51 Profile 2 Descriptors: Data processing, data processing, information interchange, information interchange, network interconnection, network interconnection, open systems interconnection, open systems interconnection, data transmission, data transmission, communication

26、 procedure, communication procedure, control procedures, control procedures, transport layer, network layer, profiles.ISO/IECISP10608-2:1992(E) BSI 01-2000 iii Foreword ISO (the International Organization for Standardization) and IEC (theInternational Electrotechnical Commission) form the specialize

27、d system for worldwide standardization. National bodies that are members of ISO or IEC participate in the development of International Standards through technical committees established by the respective organization to deal with particular fields of technical activity. ISO and IEC technical committ

28、ees collaborate in fields of mutual interest. Other international organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the work. In the field of information technology, ISO and IEC have established a joint technical committee, ISO/IEC JTC1. In addition to

29、developing International Standards, ISO/IEC JTC1 has created a Special Group on Functional Standardization for the elaboration of International Standardized Profiles. An International Standardized Profile is an internationally agreed, harmonized document which identifies a standard or group of stand

30、ards, together with options and parameters, necessary to accomplish a function or set of functions. Draft International Standardized Profiles are circulated to national bodies for voting. Publication as an International Standardized Profile requires approval by at least75% of the national bodies cas

31、ting a vote. International Standardized Profile ISO/IEC ISP10608-2 was prepared with the collaboration of OSI Asia-Oceania Workshop (AOW); European Workshop for Open Systems (EWOS); OSI Implementors Workshop (OIW). ISO/IEC ISP10608 consists of the following parts, under the general title Information

32、 technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service: Part1: General overview and subnetwork-independent requirements; Part2: TA51 profile including subnetwork-dependent requirements for CSMA/CD Local Area Networks (LANs); P

33、art4: Definition of profile TA53 for operation over a Token Ring LAN subnetwork; Part5: TA1111/TA1121 profiles including subnetwork-dependent requirements for X.25 packet-switched data networks using vertual calls; Part13: MAC sublayer and physical layer dependent requirements for Token Ring local a

34、rea network. Annex A and Annex B form an integral part of this part of ISO/IEC ISP10608. Annex C is for information only.iv blankISO/IEC ISP10608-2:1992(E) BSI 01-2000 1 Introduction This part of ISO/IEC ISP10608 (International Standardized Profile) is defined within the context of Functional Standa

35、rdization, in accordance with the principles specified by ISO/TR10000-1:1990. Thecontext of Functional Standardization is one part of the overall field of Information Technology (IT) standardization activities, covering base standards, profiles, and registration mechanisms. A profile defines a combi

36、nation of base standards that collectively perform a specific well-defined IT function. Profiles standardize the use of options and other variations in the base standards, and provide a basis for the development of uniform, internationally recognized system tests. One of the most important roles for

37、 an ISP is to serve as the basis for the development (by organizations other than ISO and IEC) of internationally recognized tests and test centers. ISPs are produced not simply to legitimize a particular choice of base standards and options, but to promote real system interoperability. The developm

38、ent and widespread acceptance of tests based on this and other ISPs is crucial to the successful realization of this goal. ISO/IEC ISP10608 consists of several parts, of which this is Part2. ISO/IEC10608-1 specifies subnetwork-type independent requirements for Group TA profiles. ISO/IEC10608-2 speci

39、fies subnetwork-type dependent requirements for Profile TA51. ISO/IEC ISP10608-3 specifies subnetwork-type dependent requirements for Profile TA52. ISO/IEC ISP10608-4 specifies subnetwork-type dependent requirements for Profile TA53. ISO/IEC ISP10608-5 specifies subnetwork-type dependent requirement

40、s for Profiles TA1111 and TA1121. 1 Scope 1.1 General This part of ISO/IEC ISP10608 specifies subnetwork-type dependent requirements for end system operation when the end system is attached to a carrier-sense multiple access with collision detection (CSMA/CD) local area network. The Directory of Pro

41、files and ISPs in ISO TR10000 identifies this TA profile configuration as TA51. Thecomplete set of requirements for TA51 consists of the requirements specified in ISO/IEC ISP10608-1 and ISO/IEC ISP10608-2. 1.2 Position of profile within the taxonomy ISO/IEC ISP10608 covers the taxonomy elements iden

42、tified as “TA” in the Directory of Profiles and ISPs contained in ISO/IEC TR10000-2. These elements constitute Transport profiles, group A: Connection-mode Transport Service over Connectionless-mode Network Service. 1.3 Scenario This clause specifies requirements for the profile identified in ISO/IE

43、C TR10000 as TA51, Connection-mode Transport Service provided over the Connectionless-mode Network Service on a CSMA/CD LAN. Figure 1 illustrates the standards which comprise the TA51 profile. Figure 2 illustrates the configuration of systems to which TA51 is applicable. Transport Layer ISO8073 ISO8

44、073/Add.2 Network Layer ISO8473 ISO9542 Data-link Layer ISO8802-2 ISO8802-3 Physical Layer ISO8802-3 Figure 1 Standards comprising the TA51 ProfileISO/IEC ISP10608-2:1992(E) 2 BSI 01-2000 2 Normative References The following documents contain provisions which, through reference in this text, constit

45、ute provisions of this International Standardized Profile. At the time of publication, the editions indicated were valid. All documents are subject to revision, and parties to agreements based on this International Standardized Profile are warned against automatically applying any more recent editio

46、ns of the documents listed below, since the nature of references made by ISPs to such documents, is that they may be specific to a particular edition. Members of IEC and ISO maintain registers of currently valid International Standards and ISPs, and the CCITT maintains published editions of its curr

47、ent Recommendations. ISO8473:1988, Information processing systems Data communications Protocol for providing the connectionless-mode network service. ISO8802-2:1988, Information processing systems Open Systems Interconnection Local area networks Logical link control. ISO/IEC8802-3:1990, Information

48、processing systems Open Systems Interconnection Local area networks Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications Part3. ISO9542:1988, Information processing systems Telecommunications and information exchange between systems End sys

49、tem to Intermediate system routeing exchange protocol for use in conjunction with the Protocol for providing the connectionless-mode network service (ISO8473). ISO/IEC ISP10608-1:1992, Information technology International Standardized Profile TAnnnn Connection-mode Transport Service over Connectionless-mode Network Service Part1: General overview and subnetwork-type independent requirements. ISO/IEC10039:1990, Information technology Open Systems Interconnection Local area networks Medium Access Con