BS EN ISO 8230-3-2008 Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents (ISO 8230-3 2008)《干洗机的安全性要求 第3部分 用易燃溶剂的机械(ISO 8230-3-2008)》.pdf

《BS EN ISO 8230-3-2008 Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents (ISO 8230-3 2008)《干洗机的安全性要求 第3部分 用易燃溶剂的机械(ISO 8230-3-2008)》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 8230-3-2008 Safety requirements for dry-cleaning machines - Part 3 Machines using combustible solvents (ISO 8230-3 2008)《干洗机的安全性要求 第3部分 用易燃溶剂的机械(ISO 8230-3-2008)》.pdf（20页珍藏版）》请在麦多课文档分享上搜索。

1、BS EN ISO8230-3:2008ICS 97.060NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBRITISH STANDARDSafety requirementsfor dry-cleaningmachinesPart 3: Machines using combustiblesolvents (ISO 8230-3:2008)Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontro

2、lled Copy, (c) BSIThis British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2009. BSI 2009ISBN 978 0 580 54915 1Amendments/corrigenda issued since publicationDate CommentsBS EN ISO 8230-3:2008National forewordThis British Standard is the UK imp

3、lementation of EN ISO 8230-3:2008. Together with BS EN ISO 8230-1:2008 and BS EN ISO 8230-2:2008, this standard supersedes BS EN ISO 8230:1998 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee TCI/33, Textile machinery.A list of organizations represented

4、 on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Licensed Copy: Wa

5、ng Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 8230-3October 2008ICS 97.060 Supersedes EN ISO 8230:1997 English VersionSafety requirements for dry-cleaning machines - Part 3:Machines using combustible solvents (

6、ISO 8230-3:2008)Exigences de scurit pour les machines de nettoyage sec - Partie 3: Machines utilisant des solvants combustibles(ISO 8230-3:2008)Sicherheitsanforderungen an Textilreinigungsanlagen - Teil3: Maschinen, bei denen entflammbare Lsemittelverwendet werden (ISO 8230-3:2008)This European Stan

7、dard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

8、 such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own langua

9、ge and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb

10、ourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGManagement Centre: rue de Stassart, 36 B-1050 Brussels 2008 CEN All rights o

11、f exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 8230-3:2008: ELicensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIBS EN ISO 8230-3:2008EN ISO 8230-3:2008 (E) 3 Foreword This document (EN ISO 8230-3:

12、2008) has been prepared by Technical Committee ISO/TC 72 “Textile machinery and machinery for dry-cleaning and industrial laundering“ in collaboration with Technical Committee CEN/TC 214 “Textile machinery and accessories” the secretariat of which is held by SNV. This European Standard shall be give

13、n the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may b

14、e the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 8230:1997. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association,

15、and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annex ZA, B, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implemen

16、t this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and

17、 the United Kingdom. Endorsement notice The text of ISO 8230-3:2008 has been approved by CEN as a EN ISO 8230-3:2008 without any modification. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIBS EN ISO 8230-3:2008EN ISO 8230-3:2008 (E) 4 Annex ZA (in

18、formative) Relationship between this International Standard and the Essential Requirements of EU Directive 98/37/EC This International Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Esse

19、ntial Requirements of the New Approach Directive 98/37/EC, Machinery, amended by 98/79/EC. Once this standard is cited in the Official Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative

20、clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevant Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling wi

21、thin the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIBS EN ISO 8230-3:2008EN ISO 8230-3:2008 (E) 5 Annex ZB (informative) Relationship between this International Standard and the Essential Requirements of EU Directive 200

22、6/42/EC This International Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association to provide one means of conforming to Essential Requirements of the New Approach Directive 2006/42/EC, Machinery. Once this standard is cited in the O

23、fficial Journal of the European Communities under that Directive and has been implemented as a national standard in at least one Member State, compliance with the normative clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity with the relevan

24、t Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) falling within the scope of this standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c

25、) BSIBS EN ISO 8230-3:2008ISO 8230-3:2008(E) ISO 2008 All rights reserved iiiForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO

26、 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates cl

27、osely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Dr

28、aft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this doc

29、ument may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 8230-3 was prepared by Technical Committee ISO/TC 72, Textile machinery and accessories, Subcommittee SC 5, Industrial laundry and dry-cleaning machinery and accessories. T

30、his first edition of ISO 8230-3, together with ISO 8230-1:2008 and ISO 8230-2:2008, cancels and replaces ISO 8230:1997, of which it constitutes a technical revision. ISO 8230 consists of the following parts, under the general title Safety requirements for dry-cleaning machines: Part 1: Common safety

31、 requirements Part 2: Machines using perchloroethylene Part 3: Machines using combustible solvents Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIBS EN ISO 8230-3:2008ISO 8230-3:2008(E) iv ISO 2008 All rights reservedIntroduction This document is a

32、 type-C standard as stated in ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document. When requirements of this type-C standard are different from those which are stated in type-A or -B stan

33、dards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard. Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Cop

34、y, (c) BSIBS EN ISO 8230-3:2008INTERNATIONAL STANDARD ISO 8230-3:2008(E) ISO 2008 All rights reserved 1Safety requirements for dry-cleaning machines Part 3: Machines using combustible solvents 1 Scope This part of ISO 8230 specifies safety requirements for dry-cleaning machines that use a combustibl

35、e solvent (CS), as defined in ISO 8230-1, as their cleaning medium. It is applicable to such dry-cleaning machines, within the scope of ISO 8230-1, when they are used as intended and under conditions of misuse that are reasonably foreseeable by the manufacturer. This part of ISO 8230, in conjunction

36、 with ISO 8230-1, deals with all significant hazards, significant hazardous situations and significant hazardous events that have been identified as being significant to the types of machines covered by this part of ISO 8230 and which require specific action by the designer or manufacturer to elimin

37、ate or reduce the risk. It deals with the following significant hazards specific to the use of CS: hazards related to the entire dry-cleaning machine (electrical hazards, explosion hazards); hazards relating to the machine (combustible solvent emission, explosion hazards during the cleaning phase, e

38、xplosion hazards during the drying phase); hazards relating to the distilling equipment (combustible solvent emission, explosion hazards). This part of ISO 8230 applies to machines manufactured after the date of its issue. 2 Normative references The following referenced documents are indispensable f

39、or the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2719:2002, Determination of flash point Pensky-Martens closed cup method ISO 8230-1:2008, Safety re

40、quirements for dry-cleaning machines Part 1: Common safety requirements ISO 12100-1:2003, Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology IEC 60204-1:2005, Safety of machinery Electrical equipment of machines Part 1: General requirements EN 13

41、463-1:2001, Non-electrical equipment for potentially explosive atmospheres Part 1: Basic method and requirements Licensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIBS EN ISO 8230-3:2008ISO 8230-3:2008(E) 2 ISO 2008 All rights reservedEN 50104:2002, Ele

42、ctrical apparatus for the detection and measurement of oxygen Performance requirements and test methods (amended by EN 50104:2002/A1:2004) EN 60079-0:2006, Electrical apparatus for potentially explosive atmospheres General requirements EN 61779-1:2000, Electrical apparatus for the detection and meas

43、urement of flammable gases Part 1: General requirements and test methods 1)EN 61779-4:2000, Electrical apparatus for the detection and measurement of flammable gases Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit 2)3 Terms and d

44、efinitions For the purposes of this document, the terms and definitions given in ISO 12100-1 and ISO 8230-1 and the following apply. 3.1 area of explosion area of concentration of a combustible substance in the air where an explosion can occur 3.2 lower explosion limit LEL lower limit of the area of

45、 explosion 3.3 lower explosion point LEP temperature of a combustible liquid at which the concentration of the saturated vapour equals the lower explosion limit NOTE If the lower explosion point is unknown, it can be assumed that the CS does not form any explosive vapour air mixtures if temperatures

46、 do not exceed 15 K below the flash point. During washing and spinning, the formation of mist is possible. With the operating conditions existing in the cage, the ignition energy required for droplet size and density is not reached by means of the ignition sources to be expected. 3.4 flash point low

47、est temperature at which, under prescribed test conditions and in accordance with ISO 2719, a liquid releases combustible gas or combustible vapour in such quantities that a flame occurs immediately after contact with an effective ignition source 3.5 ignition temperature lowest temperature of a hot

48、surface, determined under prescribed test conditions, at which ignition of a combustible substance as gas air or vapour air mixture occurs 3.6 inert, verb adding of inert substances to prevent the creation of an explosive gas atmosphere 1) IEC 61779-1:1998 modified. 2) IEC 61779-4:1998 modified. Lic

49、ensed Copy: Wang Bin, ISO/EXCHANGE CHINA STANDARDS, 12/11/2009 06:22, Uncontrolled Copy, (c) BSIBS EN ISO 8230-3:2008ISO 8230-3:2008(E) ISO 2008 All rights reserved 33.7 inert gas gas that does not react with the vapour generated by the complete evaporation of the CS or oxygen 3.8 limiting oxygen concentration LOC maximum oxygen concentration in a mixture of a combustible substance and air and an inert gas, in which an explosion will not occur, determined under specified test conditions 4 Safety requirements and/or