BS EN ISO 16610-61-2015 Geometrical product specification (GPS) Filtration Linear areal filters Gaussian filters《几何产品技术规格 (GPS) 过滤 线性平面滤波器 高斯滤波器》.pdf
《BS EN ISO 16610-61-2015 Geometrical product specification (GPS) Filtration Linear areal filters Gaussian filters《几何产品技术规格 (GPS) 过滤 线性平面滤波器 高斯滤波器》.pdf》由会员分享,可在线阅读,更多相关《BS EN ISO 16610-61-2015 Geometrical product specification (GPS) Filtration Linear areal filters Gaussian filters《几何产品技术规格 (GPS) 过滤 线性平面滤波器 高斯滤波器》.pdf(30页珍藏版)》请在麦多课文档分享上搜索。
1、BSI Standards PublicationBS EN ISO 16610-61:2015Geometrical productspecification (GPS) FiltrationPart 61: Linear areal filters GaussianfiltersBS EN ISO 16610-61:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO16610-61:2015.The UK participation in its pre
2、paration was entrusted to TechnicalCommittee TDW/4, Technical Product Realization.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its cor
3、rectapplication. The British Standards Institution 2015. Published by BSI StandardsLimited 2015ISBN 978 0 580 78866 6ICS 17.040.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strateg
4、y Committee on 31 July 2015.Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 16610-61 July 2015 ICS 17.040.20 English Version Geometrical product specification (GPS) - Filtration - Part 61: Linear areal filters - Gaussian filters (ISO 1661
5、0-61:2015) Spcification gomtrique des produits (GPS) - Filtrage - Partie 61: Filtres surfaciques linaires: Filtres Gaussiens (ISO 16610-61:2015) Geometrische Produktspezifikation (GPS) - Filterung - Teil 61: Lineare Flchenfilter: Gau-Filter (ISO 16610-61:2015)This European Standard was approved by C
6、EN on 21 February 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standa
7、rds may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and not
8、ified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, I
9、celand, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Ma
10、nagement Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 16610-61:2015 EBS EN ISO 16610-61:2015EN ISO 16610-61:2015 (E) 3 European foreword The text of (EN ISO 16610-61:2015) has b
11、een prepared by Technical Committee ISO/TC 213 “Dimensional and geometrical product specifications and verification” in collaboration with Technical Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the secretariat of which is held by AFNOR. This European Stan
12、dard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2016, and conflicting national standards shall be withdrawn at the latest by January 2016. Attention is drawn to the possibility that some of the elements of
13、this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European S
14、tandard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
15、 Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 16610-61:2015 has been approved by CEN as EN ISO 16610-61:2015 without any modification. BS EN ISO 16610-61:2015ISO 16610-61:2015(E)Foreword ivIntroduction vi1 Scope . 12 Normative references 13 Terms and
16、definitions . 14 Characteristics of linear planar Gaussian filters . 24.1 General . 24.2 Weighting function of linear planar filters 24.3 Transmission characteristics of linear planar Gaussian filters . 44.3.1 Transmission characteristic of the long wave component 44.3.2 Transmission characteristic
17、of the short wave component 54.4 Separable weighting functions 65 Characteristics of linear cylindrical Gaussian filters 65.1 General . 65.2 Weighting function of linear cylindrical Gaussian filters . 65.3 Transmission characteristics of a linear cylindrical profile . 75.3.1 Transmission characteris
18、tic of the long wave component 75.3.2 Transmission characteristic of the short wave component 96 Other Information 116.1 General 116.2 Filter Designations 11Annex A (informative) Examples .12Annex B (informative) Concept diagram .15Annex C (informative) Relationship to the filtration matrix model 16
19、Annex D (informative) Relationship to the GPS matrix model .17Bibliography .18 ISO 2015 All rights reserved iiiContents PageBS EN ISO 16610-61:2015ISO 16610-61:2015(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member b
20、odies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental a
21、nd non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are d
22、escribed in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is draw
23、n to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on t
24、he ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSENISO16610612015GEOMETRICALPRODUCTSPECIFICATIONGPSFILTRATIONLINEARAREALFILTERSGAUSSIANFILTERS 几何 产品
链接地址:http://www.mydoc123.com/p-581190.html