BS EN ISO 11148-6-2012 Hand-held non-electric power tools Safety requirements Assembly power tools for threaded fasteners《手持式非电动工具 安全要求 螺纹紧固件的装配动力工具》.pdf

《BS EN ISO 11148-6-2012 Hand-held non-electric power tools Safety requirements Assembly power tools for threaded fasteners《手持式非电动工具 安全要求 螺纹紧固件的装配动力工具》.pdf》由会员分享，可在线阅读，更多相关《BS EN ISO 11148-6-2012 Hand-held non-electric power tools Safety requirements Assembly power tools for threaded fasteners《手持式非电动工具 安全要求 螺纹紧固件的装配动力工具》.pdf（42页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 11148-6:2012Hand-held non-electric power tools Safety requirementsPart 6: Assembly power tools for threaded fastenersCopyright European Committee for Standardization Pr

2、ovided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN ISO 11148-6:2012. It supersedes BS EN ISO 11148-6:2010 which is withdraw

3、n.The UK participation in its preparation was entrusted to Technical Committee MCE/8/-/2, Hand-held, non-electric power tools - Safety.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary prov

4、isions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 78567 2 ICS 25.140.10 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was publ

5、ished under the authority of the Standards Policy and Strategy Committee on 31 January 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted with

6、out license from IHS-,-,-EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 11148-6 December 2012 ICS 25.140.10 Supersedes EN ISO 11148-6:2010English Version Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) Machin

7、es portatives moteur non lectrique - Exigences de scurit - Partie 6: Machines dassemblage pour lments de fixation filets (ISO 11148-6:2012) Handgehaltene nicht elektrisch betriebene Maschinen - Sicherheitsanforderungen - Teil 6: Maschinen fr Schraubverbindungen (ISO 11148-6:2012) This European Stand

8、ard was approved by CEN on 17 December 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning

9、 such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its

10、 own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, German

11、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR N

12、ORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 11148-6:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for Resa

13、leNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2012EN ISO 11148-6:2012 (E) 3 Foreword This document (EN ISO 11148-6:2012) has been prepared by Technical Committee ISO/TC 118“Compressors and pneumatic tools, machines and equipment“ in collaboration with Techn

14、ical CommitteeCEN/TC 255 “Hand-held, non-electric power tools - Safety” the secretariat of which is held by SIS. This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by June 2013, and conflicting national

15、standards shall be withdrawn atthe latest by June 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patentrights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO

16、 11148-6:2010. This document has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this do

17、cument. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, CzechRepublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, Franc

18、e, Germany, Greece,Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 11148-6:2012 has been approved by CEN as a EN IS

19、O 11148-6:2012 without anymodification. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2012EN ISO 11148-6:2012 (E) 4 Annex ZA (informative) Relationship betwee

20、n this European Standard and the EssentialRequirements of EU Directive 2006/42/EC This European Standard has been prepared under a mandate given to CEN by the European Commissionand the European Free Trade Association to provide a means of conforming to Essential Requirements of theNew Approach Dire

21、ctive 2006/42/EC on machinery. Once this standard is cited in the Official Journal of the European Union under that Directive and has beenimplemented as a national standard in at least one Member State, compliance with the clauses of thisstandard confers, within the limits of the scope of this stand

22、ard, a presumption of conformity with thecorresponding Essential Requirements of that Directive and associated EFTA regulations. WARNING Other requirements and other EU Directives may be applicable to the product(s) fallingwithin the scope of this standard. Copyright European Committee for Standardi

23、zation Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2012ISO 11148-6:2012(E) ISO 2012 All rights reserved iiiContents PageForeword ivIntroduction v1 Scope 12 Normative references . 13 Terms and definitions .

24、 23.1 General definitions 23.2 Definitions related to assembly power tools for threaded fasteners 44 Safety requirements and/or protective measures 54.1 General . 54.2 Mechanical safety 54.3 Thermal safety 64.4 Noise reduction 64.5 Vibration . 64.6 Materials and substances processed, used or exhaust

25、ed . 74.7 Ergonomics . 74.8 Controls . 95 Verification 105.1 General conditions for tests .105.2 Noise .105.3 Vibration .105.4 Unintentional start .105.5 Power tool construction 105.6 Structure of verification of safety requirements . 116 Information for use . 116.1 Marking, signs and written warnin

26、gs . 116.2 Instructions handbook .126.3 Operating instructions .176.4 Data .176.5 Maintenance instructions 18Annex A (informative) List of significant hazards 19Annex B (informative) Examples of assembly power tools for threaded fasteners covered by this part of ISO 11148 .21Annex C (normative) Symb

27、ols for labels and signs23Annex D (normative) Additional safety requirements related to internal combustion engine power tools .25Bibliography .29Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without licen

28、se from IHS-,-,-BS EN ISO 11148-6:2012ISO 11148-6:2012(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees

29、. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the Intern

30、ational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.The main task of technical committees is to prepare International Standards. Draft International Stand

31、ards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.Attention is drawn to the possibility that some of the elements of this document may be the subject

32、 of patent rights. ISO shall not be held responsible for identifying any or all such patent rights.ISO 11148-6 was prepared by Technical Committee ISO/TC 118, Compressors and pneumatic tools, machines and equipment, Subcommittee SC 3, Pneumatic tools and machines.This second edition cancels and repl

33、aces the first edition (ISO 11148-6:2010), of which it constitutes a minor revision.ISO 11148 consists of the following parts, under the general title Hand-held non-electric power tools Safety requirements: Part 1: Assembly power tools for non-threaded mechanical fasteners Part 2: Cutting-off and cr

34、imping power tools Part 3: Drills and tappers Part 4: Non-rotary percussive power tools Part 5: Rotary percussive drills Part 6: Assembly power tools for threaded fasteners Part 7: Grinders Part 8: Sanders and polishers Part 9: Die grinders Part 10: Compression power tools Part 11: Nibblers and shea

35、rs Part 12: Circular, oscillating and reciprocating sawsA part 13, dealing with fastener driving tools, is under preparation.iv ISO 2012 All rights reservedCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted wit

36、hout license from IHS-,-,-BS EN ISO 11148-6:2012ISO 11148-6:2012(E)IntroductionThis document is a type C standard as stated in ISO 12100.The machinery concerned and the extent to which hazards, hazardous situations and events are covered are defined in the Scope of this part of ISO 11148.When provis

37、ions of this type C standard are different from those that are stated in type A or B standards, the requirements of this type C standard take precedence over the requirements of other standards for machines that have been designed and built according to the requirements of this type C standard.ISO 1

38、1148 consists of a number of independent parts for individual types of hand-held, non-electric power tools.Certain elements of this part of ISO 11148 cover hand-held, non-electric power tools driven by internal combustion engines powered by gaseous or liquid fuel. In these parts, the safety aspects

39、relating to internal combustion engines are found in a normative annex.The parts are type C standards and refer to pertinent standards of types A and B where such standards are applicable. ISO 2012 All rights reserved vCopyright European Committee for Standardization Provided by IHS under license wi

40、th CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2012Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2

41、012Hand-held non-electric power tools Safety requirements Part 6: Assembly power tools for threaded fastenersIMPORTANT The electronic file of this document contains colours that are considered useful for the correct understanding of the document. Users should consider printing this document using a

42、colour printer. ISO 3864-4 provides colourimetric and photometric properties together with, as a guideline, references from colour order systems.1 ScopeThis part of ISO 11148 applies to hand-held non-electric power tools (hereinafter “assembly power tools for threaded fasteners”) intended for tighte

43、ning or installing of threaded fasteners. The assembly power tools for threaded fasteners can be powered by compressed air, hydraulic fluid or internal combustion engines and are intended for use by one operator and supported by the operators hand or hands, with or without a suspension, e.g. a balan

44、cer.This part of ISO 11148 covers air-hydraulic impulse wrenches; impact wrenches; fastener installation tools; nutrunners; open-ended spanners (crow-foot with open-ended socket or tube nut wrench); ratchet wrenches; screwdrivers.NOTE 1 For examples of assembly power tools for threaded fasteners, se

45、e Annex B.This part of ISO 11148 does not cover special requirements and modifications of assembly power tools for threaded fasteners for the purpose of mounting them in fixtures.This part of ISO 11148 deals with all significant hazards, hazardous situations or hazardous events when the tools are us

46、ed as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer, with the exception of the use of assembly power tools for threaded fasteners in potentially explosive atmospheres.NOTE 2 EN 13463-1 gives requirements for non-electrical equipment for potentially expl

47、osive atmospheres.2 Normative referencesThe following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.ISO 3857-3

48、, Compressors, pneumatic tools and machines Vocabulary Part 3: Pneumatic tools and machinesISO 3864-2, Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labelsINTERNATIONAL STANDARD ISO 11148-6:2012(E) ISO 2012 All rights reserved 1Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN ISO 11148-6:2012ISO 11148-6:2012(E)ISO 5391, Pneumatic tools and machines Vocabul