BS EN 61143-1-1992 Specification for electrical measuring instruments X-t recorders Definitions and requirements《电气测量仪表规范 X-t记录仪 定义和要求》.pdf
《BS EN 61143-1-1992 Specification for electrical measuring instruments X-t recorders Definitions and requirements《电气测量仪表规范 X-t记录仪 定义和要求》.pdf》由会员分享,可在线阅读,更多相关《BS EN 61143-1-1992 Specification for electrical measuring instruments X-t recorders Definitions and requirements《电气测量仪表规范 X-t记录仪 定义和要求》.pdf(34页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD BS EN 61143-1:1994 IEC1143-1: 1992 Incorporating Amendment No.1 to BS7610-1:1992 (renumbers the BS as BS EN61143-1:1994) and amendment No.1 to BS EN61143-1: 1994 Electrical measuring instruments X-trecorders Part 1: Definitions and requirements The European Standard EN61143-1:1994 w
2、ith the incorporation of amendmentA1:1997 has the status of a British Standard ICS 17.220.20BSEN61143-1:1994 This British Standard, having been prepared under the directionof the Power Electrical Engineering Standards Policy Committee, was published underthe authority of the Standards Board and come
3、s intoeffect on 15 October1992 BSI 05-1999 The following BSI references relate to the work on this standard: Committee reference PEL/13 Draft for comment88/26208 DC ISBN 0 580 21222 X Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Power
4、 Electrical Engineering Standards Policy Committee (PEL/-) to Technical Committee PEL/13, upon which the following bodies were represented: Association of Consulting Engineers Department of Energy (Electricity Division) Department of Trade and Industry (National Physics Laboratory) Electricity Assoc
5、iation The Association for the Instrumentation, Control and Automation Industry GAMBICA (BEAMA Ltd.) Institution of Electrical Engineers Institution of Incorporated Executive Engineers Amendments issued since publication Amd. No. Date Comments 8388 January 1995 Renumbers BS7610-1 10283 February 1999
6、 Indicated by a sideline in the marginBSEN61143-1:1994 BSI 05-1999 i Contents Page Committees responsible Inside front cover National foreword ii Foreword 2 1 Scope 3 2 Normative references 3 3 Definitions 4 4 Description, classification and compliance 11 5 Reference conditions and intrinsic errors
7、12 6 Nominal range of use and variations 13 7 Further electrical and mechanical requirements 15 8 Constructional requirements 16 9 Information, markings and symbols 17 10 Markings and symbols for terminals 22 11 Tests to prove compliance with this part 22 Annex A (normative) Determination of the inf
8、luence of parasitic input quantities 23 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publications 25 Figure A.1 Circuit diagram for the common mode test 23 Figure A.2 Circuit diagram for the series mode test 23 Figure A.3
9、Circuit diagram for the parallel mode test 24 Table 1 Reference conditions and tolerances for testing purposes relating to the influence quantities 14 Table 2 Limits of the nominal range of use and permissible variations 15 Table 3 Examples of marking of reference values, referencerangesandnominal r
10、anges of use for temperature 18 Table 4 Symbols for marking recorders 19 List of references Inside back coverBSEN61143-1:1994 ii BSI 05-1999 National foreword This British Standard has been prepared by Technical Committee PEL/85 (formerly PEL/13) and is the English language version of EN61143-1:1994
11、 including amendment A1:1997. It is identical with IEC1143-1:1992 including amendment1:1997. It is envisaged that Part2 which specifies test methods will be published at a later date and an identical British Standard will follow. Cross-references International standard Corresponding British Standard
12、 BS89 Direct acting indicating analogue electrical measuring instruments and their accessories IEC51-1:1984 Part1:1990 Specification for definitions and general requirements common to all Parts (Identical) IEC51-2:1984 Part2:1990 Specification for special requirements for ammeters and voltmeters (Id
13、entical) IEC51-3:1984 Part3:1990 Specification for special requirements for wattmeters and varmeters (Identical) IEC51-4:1984 Part4:1990 Specification for special requirements for frequency meters (Identical) IEC51-5:1985 Part5:1990 Specification for special requirements for phase meters, power fact
14、or meters and synchroscopes (Identical) IEC51-6:1984 Part6:1990 Specification for special requirements for ohmmeters (impedance meters) and conductance meters (Identical) IEC51-7:1984 Part7:1990 Specification for special requirements for multi-function instruments (Identical) IEC51-8:1984 Part8:1990
15、 Specification for special requirements for accessories (Identical) IEC51-9:1988 BS89-9:1990 Recommended test methods (Identical) BS2011 Environmental testing IEC68-2-6:1982 Part2.1Fc: 1983 Test Fc. Vibration (sinusoidal) (Identical) IEC68-2-27:1987 Part2.1Ea: 1988 Test Ea. Shock (Identical) IEC414:
16、1973 BS5458:1977 Specification for safety requirements for indicating and recording electrical measuring instruments and their accessories (Identical) IEC617-2:1983 BS3939 Graphical symbols for electrical power, telecommunications and electronics diagrams Part2:1985 Symbol elements, qualifying symbo
17、ls and other symbols having general application (Identical)BSEN61143-1:1994 BSI 05-1999 iii The Technical Committee has reviewed the provisions of IEC27, IEC417, IEC473 and IEC1010 to which normative reference is made in the text, and has decided that they are acceptable for use in conjunction with
18、this standard. A related British Standard to IEC417:1973 is BS5817-8:1990 Specification for audiovisual, video and television equipment and systems Part8: Symbols and identification. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards
19、 are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi to iv, theENtitle page, pages2 to26, an inside back cover and a back cov
20、er. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.iv blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN61143-1 June 1994 +A1 November 1997 ICS 19.080 Supersedes HD301 SI:197
21、7 Descriptors: Measuring instrument, electrical measurement, recorder, X-t recorder English version Electrical measuring instruments X-t recorders Part1: Definitions and requirements (Includes amendment A1:1997) (IEC1143:1992+A1:1997) Appareils lectriques de mesure Enregistreurs X-t Partie1: Dfiniti
22、ons etprescriptions (inclut lamendement A1:1997) (CEI1143:1992+A1:1997) Elektrische Megerte X-t-Schreiber Teil1: Begriffe und Anforderungen (Enthlt nderung A1:1997) (IEC1143:1992+A1:1997) This European Standard was approved by CENELEC on 1994-03-08; amendment A1 was approved by CENELEC on 1997-10-01
23、. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtaine
24、d on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSEN6114311992SPECIFICATIONFORELECTRICALMEASURINGINSTRUMENTSXTRECORDERSDEFINITIONSANDREQUIREMENTS 电气

链接地址:http://www.mydoc123.com/p-576894.html