BS EN 60503-1998 Spools for broadcast videotape recorders (VTRS)《广播磁带录像机用卷筒》.pdf

《BS EN 60503-1998 Spools for broadcast videotape recorders (VTRS)《广播磁带录像机用卷筒》.pdf》由会员分享，可在线阅读，更多相关《BS EN 60503-1998 Spools for broadcast videotape recorders (VTRS)《广播磁带录像机用卷筒》.pdf（14页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 60503:1998 IEC 60503: 1998 Spools for broadcast videotape recorders (VTRS) The European Standard EN 60503:1998 has the status of a British Standard ICS 33.160.40BSEN60503:1998 This British Standard, having been prepared under the directionof the Electrotechnical Sector Board,

2、was published underthe authority of the Standards Board and comes intoeffect on 15June1998 BSI 04-1999 ISBN 0 580 29930 9 National foreword This British Standard is the English language version of EN 60503:1998. It is identical with IEC60503:1998. It supersedes BS5575:1978 which will be withdrawn on

3、2001-01-01. The UK participation in its preparation was entrusted by Technical Committee EPL/100, Audio, video and multimedia systems and equipment, to Subcommittee EPL/100/3, Equipment and systems in the field of audio, video and audiovisual engineering, which has the responsibility to: aid enquire

4、rs to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations repr

5、esented on this subcommittee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number60000 added to the old number. For instance, IEC27-1 has been renumbered as IEC60027-1. For a period of time during the change over from one numbering system to the othe

6、r, publications may contain identifiers from both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards whi

7、ch implement these international or European publications may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include a

8、ll the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i an

9、d ii, theEN title page, pages 2 to 8, an inside back cover and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. Amendments issued since publication Amd. No. Date Commen

10、tsBSEN60503:1998 BSI 04-1999 i Contents Page National foreword Inside front cover Foreword 2 Text of EN 60503 3ii blankEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60503 April 1998 ICS 33.160.40 Descriptors: Recording apparatus, magnetoscopes, video recording, magnetic tapes, bobbins, dimens

11、ions English version Spools for broadcast videotape recorders (VTRS) (IEC 60503:1998) Bobines pour magntoscopes de radiodiffusion (CEI 60503:1998) Spulen fr Videobandgerte fr den Rundfunk (VTRS) (IEC60503:1998) This European Standard was approved by CENELEC on1998-04-01. CENELEC members are bound to

12、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Centra

13、l Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same stat

14、us as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC Europea

15、n Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels 1998 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENEL

16、EC members. Ref. No. EN 60503:1998 EEN60503:1998 BSI 04-1999 2 Foreword The text of document 100B/110/FDIS, future edition2 of IEC60503, prepared by SC60B, Video recording, then by SC100B, Recording, of IECTC100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC par

17、allel vote and was approved by CENELEC as EN60503 on1998-04-01. The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard

18、IEC60503:1998 was approved by CENELEC as a European Standard without any modification. Contents Page Foreword 2 1 Scope and object 3 2 Normative references 3 3 Nominal spool sizes 3 4 Spool dimensions 4 5 Spool diagram 7 Annex ZA (normative) Normative references to international publications with th

19、eir corresponding European publications Inside back cover Figure 1 Spool type C, type B, transverse 7 Table 1 Nominal spool size 3 Table 2a Spool type C, spool dimensions 4 Table 2b Spool type C, dimension B 4 Table 3a Spool type B, spool dimensions 5 Table 3b Spool type B, dimension B 5 Table 4a Sp

20、ool transverse type, spool dimensions 6 Table 4b Spool transverse type, dimensions B 6 latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 1999-01-01 latest date by which the national standards conflicting with

21、the EN have to be withdrawn (dow) 2001-01-01EN60503:1998 BSI 04-1999 3 1 Scope and object This International Standard is applicable to tape spools which are used with video recorders for broadcast purposes. The object of this standard is to standardize the spools used throughout the various broadcas

22、t video recording formats. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All normative documents are subject to re

23、vision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents listed below. Members of ISO and IEC maintain registers of currently valid International Standards. IEC 60347:1982, Tra

24、nsverse track recorders. IEC 60558:1982, Type C helical video tape recorders. IEC 60602:1980, Type B helical video recorders. 3 Nominal spool sizes Table 1 Nominal spool size Tape size Format Nominal diameter of spools Dimensions IEC standard Table Figure mm in 25,40 mm/1,0 in Type C 165 203 229 248

25、 267 298 318 356 6,5 8,0 9,0 9,75 10,5 11,75 12,5 14,0 Table 2a Table 2a Table 2a Table 2a Table 2a Table 2a Table 2a Table 2a Table 2b Table 2b Table 2b Table 2b Table 2b Table 2b Table 2b Table 2b Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 None 60503 and 60558 60503 an

26、d 60558 60503 and 60558 60503 and 60558 None 60503 60503 25,40 mm/1,0 in Type B 165 203 229 248 267 298 305 318 356 6,5 8,0 9,0 9,75 10,5 11,75 12,0 12,5 14,0 Table 3a Table 3a Table 3a Table 3a Table 3a Table 3a Table 3a Table 3a Table 3a Table 3b Table 3b Table 3b Table 3b Table 3b Table 3b Table

27、3b Table 3b Table 3b Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 60602 60602 and 60503 60602 and 60503 60602 and 60503 60602 and 60503 None 60602 60602 and 60503 60503 50,80mm/2,0 in Transverse 165 203 267 318 356 397 6,5 8,0 10,5 12,5 14,0 15,6 Table 4a Table 4a

28、 Table 4a Table 4a Table 4a Table 4a Table 4b Table 4b Table 4b Table 4b Table 4b Table 4b Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 Figure 1 60347 60347 60347 60347 60347 60347EN60503:1998 4 BSI 04-1999 4 Spool dimensions Table 2a Spool type C, spool dimensions (seeFigure 1) Table 2b Spool type

29、C, dimension B (seeFigure 1) Dimensions Millimetres Inches Degrees A C 4,500 0,010 D 3,250 0,002 E G 120,0 0,1 H 0,65 max. 0,025 max. J 2,5 max. 0,098 max. K 91,5 min. 3,600 min. L 153 min. 6,000 min. M 30,8 0,1 1,212 0,003 NOTEIn the case of plastic hubs, dimension A shall bemm/ in Millimetres Inch

30、es 6,500 0,010 8,000 0,010 9,000 0,010 9,750 0,010 10,500 0,010 11,750 0,010 12,500 0,010 14,000 0,010 762 , +0,1 00 , 3000 , +0,0040000 , 114,0 +0,500 , 82,2 +0,1 00 , 5,60 +0,15 000 , 0219 , +0,006 0000 , 762 ,03 , + 00 , 3000 ,0012 , + 0000 , 164,8 +0,5 00 , 203,0 +0,5 00 , 229,0 +0,5 00 , 248,0

31、+0,5 00 , 267,0 +0,5 00 , 298,2 +0,5 00 , 318,0 +0,5 00 , 356,0 +0,5 00 ,EN60503:1998 BSI 04-1999 5 Table 3a Spool type B, spool dimensions (seeFigure 1) Table 3b Spool type B, dimension B (seeFigure 1) Dimensions Millimetres Inches Degrees A C 4,500 0,010 D 3,250 0,002 E G 120,0 0,1 H 0,65 max. 0,0

32、25 max. J 2,5 max. 0,098 max. K 91,5 min. 3,600 min. L 153 min. 6,000 min. M 30,8 0,1 1,212 0,003 Millimetres Inches 6,500 0,010 8,000 0,010 9,000 0,010 9,750 0,010 10,500 0,010 11,750 0,010 12,000 0,010 12,500 0,010 14,000 0,010 76,2 +0,1 00 , 3000 , +0,0040000 , 114,0 +0,5 00 , 82,5 +0,1 00 , 5,60

33、 +0,15 00 , 0219 , +0,006 0000 , 164,8 +0,5 00 , 203,0 +0,5 00 , 229,0 +0,5 00 , 248,0 +0,5 00 , 267,0 +0,5 00 , 298,2 +0,5 00 , 304,5 +0,5 00 , 317,2 +0,5 00 , 356,0 +0,5 00 ,EN60503:1998 6 BSI 04-1999 Table 4a Spool transverse type, spool dimensions (seeFigure 1) Table 4b Spool transverse type, di

34、mensionsB (seeFigure 1) Dimensions Millimetres Inches Degrees A C a 4,500 0,010 D 3,250 0,002 E F E/2 E/2 G 120,0 0,1 H 0,65 max. 0,025 max. J 2,5 max. 0,098 max. K 91,5 min. 3,600 min. L 153 min. 6,000 min. M 56,2 0,1 2,212 0,003 a Exclusive of friction ring. Friction rings, if provided, shall be s

35、uch as not to impair spool performance. Millimetres Inches 6,500 0 010 8,000 0,010 10,500 0,010 12,500 0,010 14,000 0,010 15,625 0,010 a a The size reel is for special applications only and may not fit on certain machines. 76,2 +0,1 00 , 3000 , +0,004 0000 , 114,0 +0,50 000 , 82,5 +0,1 00 , 5,60 +0,

36、15 000 , 0219 , +0,006 0000 , 165 +0,5 00 , 203 +0,5 00 , 267 +0,5 00 , 318 +0,5 00 , 356 +0,5 00 , 397 +0,5 00 ,EN60503:1998 BSI 04-1999 7 5 Spool diagram Figure 1 Spool type C, type B, transverse8 blankEN60503:1998 BSI 04-1999 Annex ZA (normative) Normative references to international publications

37、 with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequen

38、t amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTEWhen an international publication has been mod

39、ified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60347 1982 Transverse track video recorders IEC 60558 1982 Type C helical video tape recorders HD 573 S1 a 1990 IEC 60602 1980 Type B helical video recorders HD 574 S1 b 1990 a HD 573

40、 S1 includes A1:1987 to IEC 60558. b HD 574 S1 includes A1:1987 to IEC 60602.BS EN 60503:1998 IEC 60503: 1998 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the independent national body responsible for preparing BritishStandards. It presents the UK view on standards

41、in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our

42、products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers memb

43、ers an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In r

44、esponse to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishStandards, unless otherwise requested. Information on standards BSI provides a wide range of information on national, European and international standards thro

45、ugh its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel:02089967111. Fax:02089967048. Subscribing members of BSI are kept up to date with stand

46、ards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel:02089967002. Fax:02089967001. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the p

47、ublications of the internationalstandardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written p

48、ermission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel:02089967070.