BS EN 50290-2-36-2016 Communication cables Common design rules and construction Crosslinked Silicone rubber insulation compound《通信电缆 通用设计规则和结构 交联硅橡胶绝缘料》.pdf

《BS EN 50290-2-36-2016 Communication cables Common design rules and construction Crosslinked Silicone rubber insulation compound《通信电缆 通用设计规则和结构 交联硅橡胶绝缘料》.pdf》由会员分享，可在线阅读，更多相关《BS EN 50290-2-36-2016 Communication cables Common design rules and construction Crosslinked Silicone rubber insulation compound《通信电缆 通用设计规则和结构 交联硅橡胶绝缘料》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、Communication cablesPart 2-36: Common design rules and construction Crosslinked Silicone rubber insulation compoundBS EN 50290-2-36:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 50290-2-36:20

2、16.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publi

3、cation does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 93149 9ICS 29.035.20; 33.120.10Compliance with a British Standard cannot confe

4、r immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2016. Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 50290-2-36:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISC

5、HE NORM EN 50290-2-36 August 2016 ICS 33.120.10; 29.035.20 English Version Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compoundCbles de communication - Partie 2-36: Rgles de conception communes et construction - Mlange de caoutchouc

6、 silicone rticul pour enveloppes isolantes Kommunikationskabel - Teil 2-36: Gemeinsame Regeln fr Entwicklung und Konstruktion - Vernetzte Silikongummi-Isoliermischung This European Standard was approved by CENELEC on 2016-07-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regul

7、ations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC me

8、mber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versi

9、ons. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

10、 Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Managem

11、ent Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 50290-2-36:2016 EBS EN 50290-2-36:2016EN 50290-2-36:2016 (E) 2 Contents Page European foreword 3 1 Scope . 4 2 Normative references 4

12、 3 Compound test requirements 4 4 Cable test requirements 5 5 Health, Safety and Environmental (HSE) Regulations 5 BS EN 50290-2-36:2016EN 50290-2-36:2016 (E) 3 European foreword This document (EN 50290-2-36:2016) has been prepared by CLC/TC 46X, “Communication cables“. The following dates are fixed

13、: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-07-22 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2019-07-22 Attention is drawn to the

14、possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 50290-2-36:2016EN 50290-2-36:2016 (E) 4 1 Scope This Part 2-36 of EN 50290 gives specific requirements for

15、 crosslinked Silicone rubber compound (SiR) to be used for the insulation of fire resistant cables. It is essential to read this European Standard in conjunction with Part 2-20 of EN 50290 and other applicable product standards. Using raw material and type test data as outlined in this standard, the

16、 raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application. This part 2-36 of EN 50290 describes the compound type as given in Table 1. Table 1 Crosslinked SiR insulation compound Type Maximum operating temperatu

17、re SiR 180 C 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includ

18、ing any amendments) applies. EN 50290-2-20, Communication cables Part 2-20: Common design rules and construction General EN 60684-2, Flexible insulating sleeving Part 2: Methods of test (IEC 60684-2) EN 60754-1, Test on gases evolved during combustion of materials from cables Part 1: Determination o

19、f the halogen acid gas content (IEC 60754-1) EN 60754-2, Test on gases evolved during combustion of materials from cables Part 2: Determination of acidity (by pH measurement) and conductivity (IEC 60754-2) EN 60811-401, Electric and optical fibre cables Test methods for non-metallic materials Part 4

20、01: Miscellaneous tests Thermal ageing methods Ageing in an air oven (IEC 60811-401) EN 60811-501, Electric and optical fibre cables Test methods for non-metallic materials Part 501: Mechanical tests Tests for determining the mechanical properties of insulating and sheathing compounds (IEC 60811-501

21、) EN 60811-507, Electric and optical fibre cables Test methods for non-metallic materials Part 507: Mechanical tests - Hot set test for cross-linked materials (IEC 60811-507) EN 60811-606, Electric and optical fibre cables Test methods for non-metallic materials Part 606: Physical tests Methods for

22、determining the density (IEC 60811-606) 3 Compound test requirements The tests are to be carried out on granules or moulded plaques (or other suitable forms) produced from granules of the supplied compound. This data shall describe the general performance of Silicone rubber insulation compounds. The

23、 data shall be provided by the compound supplier and therefore can be included in any supply specification of the raw material. Test methods, relevant requirements and limits are shown in Table 2. In the case of special applications, additional requirements could be specified. BS EN 50290-2-36:2016E

24、N 50290-2-36:2016 (E) 5 4 Cable test requirements The anticipated performance assumes standard cable design and conventional process technology and is specified in Table 3. In case of specific applications, additional requirements could be specified. Relevant test methods and requirements, especiall

25、y referring to any cable fire performance, shall be included in the detailed specification of the cable. 5 Health, Safety and Environmental (HSE) Regulations The materials are subject to Health, Safety and Environmental (HSE) requirements as defined in EN 50290-2-20. Any deviations or compliance fai

26、lures must be identified by the raw material supplier and necessary corrective actions to be undertaken agreed with the cable maker. Table 2 Crosslinked Silicone rubber insulation compound properties on granulesaCharacteristics Test method Unit Values 1 Corrosivity of gases pH-value conductivity val

27、ue EN 60754-2 - S/mm 4,3 10 2 Halogen acid content HCl/HBr HF EN 60754-1 EN 60684-2, 45.2 % % 0,5 0,1 3 Density EN 60811-606 g/cm3to be reported by supplierbaAll values of Table 2 shall be provided by the compound supplier, see Clause 3. bInformative: to be given values are only to characterize the

28、material in order to give a perception whether the material is suitable to meet the cable requirements requested in the relevant product standard/specification. BS EN 50290-2-36:2016EN 50290-2-36:2016 (E) 6 Table 3 Crosslinked Silicone rubber insulation compound properties on cable Characteristics T

29、est method Unit Value 1 Mechanical properties 1.1 1.1.1 1.1.2 Before ageing Tensile strength median, min. Elongation at break median, min. EN 60811-501 MPa % 5 150 1.2 After ageing Ageing conditions temperature duration EN 60811-401 C h 2003 10x24 1.2.1 Tensile strength median, min. MPa 4 1.2.2 Elon

30、gation at break median, min. % 120 2 Hot set test Test conditions Temperature Duration Tensile force Results to be obtained Elongation under load - max. Residual Elongation - max. EN 60811-507 C min N/cm % % 2503 15 200,5 100 25 BS EN 50290-2-36:2016This page deliberately left blankBSI is the nation

31、al body responsible for preparing British Standards and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)About usWe bring

32、 together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. O

33、rganizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Servi

34、ces team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Stan

35、dards Development Organizations, hard copies can be ordered from our Customer Services team.Copyright in BSI publicationsAll the content in BSI publications, including British Standards, is the property of and copyrighted by BSI or some person or entity that owns copyright in the information used (s

36、uch as the international standardization bodies) and has formally licensed such information to BSI for commercial publication and use.Save for the provisions below, you may not transfer, share or disseminate any portion of the standard to any other person. You may not adapt, distribute, commercially

37、 exploit, or publicly display the standard or any portion thereof in any manner whatsoever without BSIs prior written consent.Storing and using standardsStandards purchased in soft copy format: A British Standard purchased in soft copy format is licensed to a sole named user for personal or internal

38、 company use only. The standard may be stored on more than 1 device provided that it is accessible by the sole named user only and that only 1 copy is accessed at any one time. A single paper copy may be printed for personal or internal company use only.Standards purchased in hard copy format: A Bri

39、tish Standard purchased in hard copy format is for personal or internal company use only. It may not be further reproduced in any format to create an additional copy. This includes scanning of the document.If you need more than 1 copy of the document, or if you wish to share the document on an inter

40、nal network, you can save money by choosing a subscription product (see Subscriptions).Reproducing extractsFor permission to reproduce content from BSI publications contact the BSI Copyright & Licensing team.SubscriptionsOur range of subscription services are designed to make using standards easier

41、for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can k

42、eep in touch with standards developments and receive substantial discounts on the purchase price of standards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the lates

43、t hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Subscribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many

44、 users as you wish. With updates supplied as soon as theyre available, you can be sure your documentation is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and ser

45、vices to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or other BSI publication please inform the Knowledge Centre.Useful ContactsCustomer ServicesTel: +44 345 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 345 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Group Headquarters389 Chiswick High Road London W4 4AL UKBSI Back Cover.indd 1 27/01/2016 14:20