BS EN 50194-2-2006 Electrical apparatus for the detection of combustible gases in domestic premises - Electrical apparatus for continuous operation in a fixed installation in recrea.pdf

《BS EN 50194-2-2006 Electrical apparatus for the detection of combustible gases in domestic premises - Electrical apparatus for continuous operation in a fixed installation in recrea.pdf》由会员分享，可在线阅读，更多相关《BS EN 50194-2-2006 Electrical apparatus for the detection of combustible gases in domestic premises - Electrical apparatus for continuous operation in a fixed installation in recrea.pdf（22页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 50194-2:2006Electrical apparatus for the detection of combustible gases in domestic premises Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises Additional test methods and performance requirementsThe Europ

2、ean Standard EN 50194-2:2006 has the status of a British StandardICS 13.320g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Licensed Copy: Wang Bin,

3、na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSIBS EN 50194-2:2006This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2006 BSI 2006ISBN 0 580 49481 0National forewordThis British Standard was published by BSI. It is t

4、he UK implementation of EN 50194-2:2006.The UK participation in its preparation was entrusted by Technical Committee GEL/31, Equipment for explosive atmospheres, to Subcommittee GEL/31/19, Gas detectors.A list of organizations represented on GEL/31/19 can be obtained on request to its secretary.This

5、 publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsLicensed Copy: Wang Bin, na

6、, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEUROPEAN STANDARD EN 50194-2 NORME EUROPENNE EUROPISCHE NORM August 2006 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Ce

7、ntral Secretariat: rue de Stassart 35, B - 1050 Brussels 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50194-2:2006 E ICS 13.320 English version Electrical apparatus for the detection of combustible gases in domestic premis

8、es Part 2: Electrical apparatus for continuous operation in a fixed installation in recreational vehicles and similar premises - Additional test methods and performance requirements Matriels lectriques pour la dtection des gaz combustibles dans les locaux usage domestique Partie 2: Matriels lectriqu

9、es en fonctionnement continu et en installation fixe dans les vhicules de loisir et locaux similaires - Mthodes dessai supplmentaires et exigences de qualit de fonctionnement Elektrische Gerte fr die Detektion von brennbaren Gasen in Wohnhusern Teil 2: Ortsfeste elektrische Gerte zum kontinuierliche

10、n Betrieb in Freizeitfahrzeugen oder hnlichen Umgebungen - Ergnzende Prfverfahren und Anforderungen an das Betriebsverhalten This European Standard was approved by CENELEC on 2006-03-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for

11、giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three offici

12、al versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical commit

13、tees of Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

14、 Licensed Copy: Wang Bin, na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 50194-2:2006 - 2 - Foreword This European Standard was prepared by WG 4 of the Technical Committee CENELEC TC 216, Gas detectors. The text of the draft was submitted to the formal vote and was approved by

15、CENELEC as EN 50194-2 on 2006-03-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2007-03-01 latest date by which the national standards conflicting with the EN have to be

16、withdrawn (dow) 2009-03-01 This Part 2 is intended to be used in conjunction with EN 50194:2000. This European Standard supplements or modifies the corresponding clauses of EN 50194; where it states “addition”, “modification” or “replacement” the relevant text of EN 50194 is to be adapted accordingl

17、y. Subclauses, tables and notes that are numbered starting from 101 are additional to those in Part 1. _ Licensed Copy: Wang Bin, na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI- 3 - EN 50194-2:2006 Contents 1 Scope.4 2 Normative references4 3 Definitions 5 4 General requirements

18、.6 4.1 General .6 4.2 Construction 7 4.3 Indicators and alarms 7 4.4 Fault signals7 4.5 Output signal .7 4.6 Labelling and instructions 8 5 Test and performance requirements9 5.1 General requirements for tests.9 5.2 Normal conditions for tests 9 5.3 Test methods and performance requirements 10 6 Sel

19、f-contained battery powered apparatus.16 Annex A (informative) Location of the apparatus and sensors - Guide for writing the instruction booklet.17 Annex B (informative) Emergency procedures - Leakage of gas or petrol .18 Table 101 - Electromagnetic emission Test conditions and performance requireme

20、nts .14 Table 102 - Electromagnetic immunity Test conditions and performance requirements.15 Table 103 - Immmunity for DC powered controls15 Licensed Copy: Wang Bin, na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 50194-2:2006 - 4 - 1 Scope This Clause of EN 50194 is replaced by

21、: This European Standard specifies test methods and performance requirements for electrical apparatus for the detection of combustible gases designed for continuous operation in a fixed installation in recreational vehicles and similar premises. NOTE 1 For caravan holiday homes EN 50194 applies. Thi

22、s standard specifies apparatus designed to operate in the event of an escape of liquefied petroleum gas (LPG) and/or petrol (gasoline) vapour and to provide a visual and audible alarm and an executive action in the form of an output signal that can actuate directly or indirectly a shut-off device an

23、d/or other ancillary device (Type A of EN 50194). The standard excludes apparatus for the detection of toxic gases such as carbon monoxide (see EN 50291). Apparatus complying with this standard is not considered suitable for industrial or commercial installations for which EN 61779-1 and EN 61779-4

24、apply. NOTE 2 Apparatus tested in accordance with the EN 61779 series of standards will not necessarily comply with this standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. F

25、or undated references, the latest edition of the referenced document (including any amendments) applies. DIN 51361 Mineral spirits Special boiling point spirits Requirements EN 437:2003 Test gases Test pressures Appliance categories EN 13878:2003 Leisure accommodation vehicles Terms and definitions

26、EN 50194:20001)Electrical apparatus for the detection of combustible gases in domestic premises Test methods and performance requirements EN 50018:2000 Electrical apparatus for potentially explosive atmospheres - Flameproof enclosure d EN 50270:2006 Electromagnetic compatibility Electrical apparatus

27、 for the detection and measurement of combustible gases, toxic gases or oxygen EN 60068-2-6 Environmental testing Part 2-6: Tests Test Fc: Vibration (sinusoidal) (IEC 60068-2-6) EN 60068-2-7 Environmental testing Part 2-7: Tests Test Ga: Acceleration, steady state (IEC 60068-2-7) EN 60068-2-27 Envir

28、onmental testing - Part 2-27: Tests - Test Ea and guidance: Shock (IEC 60068-2-27) 1)Will be replaced by EN 50194-1, presently under consideration. Licensed Copy: Wang Bin, na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI- 5 - EN 50194-2:2006 EN 60068-2-52 Environmental testing - P

29、art 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) (IEC 60068-2-52) EN 60529 Degrees of protection provided by enclosures (IP Code) (IEC 60529) EN 60721-3-6:1993 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their s

30、everities - Section 6: Ship environment (IEC 60721-3-6:1987 + A1:1991) EN 60945:2002 Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results (IEC 60945:2002) EN 61779-1 Electrical apparatus for the detection and measureme

31、nt of flammable gases - Part 1: General requirements and test methods (IEC 61779-1) EN 61779-4 Electrical apparatus for the detection and measurement of flammable gases - Part 4: Performance requirements for group II apparatus indicating a volume fraction up to 100 % lower explosive limit (IEC 61779

32、-4) EN ISO 10239:2000 EN ISO 10239:2000/AC:2002 Small craft Liquefied petroleum gas (LPG) systems (ISO 10239:2000 + corrigendum 2001) ISO 7637-1:2002 Road vehicles - Electrical disturbances from conduction and coupling - Part 1: Definitions and general considerations ISO 7637-2:2004 Road vehicles -

33、Electrical disturbances from conduction and coupling - Part 2: Electrical transient conduction along supply lines only 3 Definitions The definitions of EN 50194 apply, with the following additions: 3.19. recreational vehicle recreational vehicles considered by this standard include recreational craf

34、t, caravans and motor caravans NOTE Other motorised vehicles like trucks are known to have residential accommodation. They are not recreational vehicles but are considered as similar premises in respect of this standard. 3.20 caravan holiday home transportable leisure accommodation vehicle that does

35、 not meet requirements for construction and use of road vehicles, that retains means for mobility and that is for temporary or seasonal occupation EN 13878 3.21 recreational craft boat of a minimum length of 2,5 m and a maximum length of 24 m as specified in Directive 94/25/EC, which is intended for

36、 sports or leisure purposes NOTE For the purposes of this standard the word boat should be taken with the meaning recreational craft. Licensed Copy: Wang Bin, na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSIEN 50194-2:2006 - 6 - 3.22 remote sensor sensor assembly that is mounted in

37、 a separate location from the control unit NOTE This definition should be read in conjunction with Definition 3.12 of EN 50194. 3.23 control unit unit that may contain the power supply, signal processing, alarm circuits and indicators 3.24 vehicle supply powered apparatus apparatus designed to be po

38、wered by the vehicles electrical supply 3.25 caravan trailer leisure accommodation vehicle that meets requirements for construction and use of road vehicles EN 13878 3.26 motor caravan self-propelled leisure accommodation vehicle that meets requirements for construction and use of road vehicles It c

39、ontains at least: seats and table, sleeping accommodation which may be converted from the seats, cooking facilities, and storage facilities EN 13878 4 General requirements 4.1 General This subclause of EN 50194 is applicable with the following additions: This standard also includes apparatus for det

40、ecting petrol vapour in applications such as the bilges of boats, where petrol is used as fuel. It is not applicable for the detection of vapour of diesel fuel. NOTE 101 Due to the low vapour pressure leaks of diesel fuel do not cause the risk of an explosion at ambient temperatures. The requirement

41、s for flammable gas detection as defined in EN 50194 apply equally to petrol vapour detectors. In this standard there are requirements that cover all apparatus. Additional application specific requirements apply to certain groups of recreational vehicles, such as boats. An apparatus which complies w

42、ith the requirements for recreational craft will automatically comply with the requirements for motor caravans and caravans. An apparatus which complies with the requirements for motor caravans will automatically comply with the requirements for caravans. The apparatus are designed for continuous op

43、eration. NOTE 102 When the vehicle is not in use the apparatus may be switched off in order to save the vehicles power supply or the internal batteries. Licensed Copy: Wang Bin, na, Wed Feb 07 01:04:43 GMT+00:00 2007, Uncontrolled Copy, (c) BSI- 7 - EN 50194-2:2006 The apparatus may consist of one o

44、r more sensor(s) and a control unit. Sensors (integrated into the apparatus or remote) shall be designed to detect LPG and/or petrol vapour. NOTE 103 Sensors or apparatus designed according EN 50194 may be used as apparatus or as component of it, if the additional requirements of this standard are c

45、omplied with. The apparatus shall reliably detect the presence of combustible gas in recreational vehicles under the stated application conditions, shall produce an alarm and shall be able to initiate executive actions whenever the level exceeds the alarm set point. The apparatus, electrical assembl

46、ies and components shall comply with EN 50194, where applicable, with the construction requirements of 4.2 to 4.6 and the test and performance requirements of Clause 5. 4.2 Construction This subclause of EN 50194 is applicable with the following additions: Each sensor shall be constructed of materia

47、ls that will not corrode in the environment where it is designed for, e.g. in the presence of a salt-laden atmosphere as exists in a marine environment, or be affected by the gases and vapours that may be expected to be present in a bilge of a recreational craft. Adequate means shall be provided to

48、mount the remote sensor(s), pointing vertically downwards, securely to the vehicles substructure. The control unit shall be constructed of materials that are suitable for use in the intended application e.g. in the cabin or below deck area of a recreational craft. 4.3 Indicators and alarms This subc

49、lause of EN 50194 is applicable with the following additions: 4.3.3 Addition: If more than one sensor is connected to a control unit, the control unit shall indicate the alarm condition of the different sensors individually. 4.4 Fault signals This subclause of EN 50194 is replaced by: The apparatus shall provide a visual and audible fault signal in the event of interruption of communication between control unit and the remote sensor(s). The audible fault signal shall be clearly identified and