BS EN 24178-1981 Specification for information to be recorded in distribution trials involving complete filled transport packages《涉及完整、满载运输包装分发试验信息记录规范》.pdf

《BS EN 24178-1981 Specification for information to be recorded in distribution trials involving complete filled transport packages《涉及完整、满载运输包装分发试验信息记录规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 24178-1981 Specification for information to be recorded in distribution trials involving complete filled transport packages《涉及完整、满载运输包装分发试验信息记录规范》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 24178:1993 ISO4178:1980 Incorporating Amendment No.1 Specification for Information to be recorded in distribution trials involving complete, filled transport packages The European Standard EN24178:1992 has the status of a British Standard UDC 621.798.1:620.165.7BSEN24178:1993

2、This British Standard, having been prepared under the directionof the Packaging andFreight Containers StandardsCommittee, was published under the authorityofthe ExecutiveBoard and comes into effect on 31 March1981 BSI 10-1999 The following BSI references relate to the work on this standard: Committe

3、e reference PKS/501 Draft for comment79/61402 DC ISBN 0 580 11828 2 Cooperating organizations The Packaging and Freight Containers Standards Committee, under whose direction this British Standard was prepared, consists of representatives from the following: Association of Drum Manufacturers* British

4、 Bag Federation British Fibreboard Packaging Association* British Food Manufacturing Industries Research Association British Paper and Board Industry Federation (PIF) British Stationery and Office Products Federation Chemical Industries Association* Collapsible Tube Manufacturers Association Departm

5、ent of Trade (Paper, Printing, Publishing, Services and Distribution)* Department of Transport Food Manufacturers Federation Incorporated General Council of British Shipping Glass Manufacturers Federation* Institute of Packaging* Institute of Trading Standards Administration Institution of Productio

6、n Engineers Metal Packaging Manufacturers Association Ministry of Defence* Oil Companies Materials Association Paintmakers Association of Great Britain Ltd. Soap and Detergent Industry Association* Timber Packaging and Pallet Confederation* Timber Research and Development Association* The organizati

7、ons marked with an asterisk in the above list, together with the following, were directly represented on the Technical Committee entrusted with the preparation of this British Standard: Department of Industry (Laboratory of the Government Chemist) Electronic Components Industry Federation Electronic

8、 Engineering Association Pira (The Research Association for the Paper and Board, Printing and Packaging Industries) Society of Motor Manufacturers and Traders Limited Telecommunication Engineering and Manufacturing Association (TEMA) Vitreous Enamel Development Council Technical Expert Amendments is

9、sued since publication Amd. No. Date of issue Comments 7466 March 1993 Indicated by a sideline in the marginBSEN24178:1993 BSI 10-1999 i Contents Page Cooperating organizations Inside front cover National foreword ii Foreword 2 0 Introduction 3 1 Scope and field of application 3 2 Information to be

10、recorded 3BSEN24178:1993 ii BSI 10-1999 National foreword This British Standard has been prepared under the direction of the Packaging and Freight Containers Standards Committee. It is identical with ISO4178 “Complete, filled transport packages Distribution trials Information to be recorded” which w

11、as developed by Technical Committee ISO/TC122, Packaging, and was published in 1980 by the International Organization for Standardization (ISO). In 1992 the European Committee for Standardization (CEN) accepted ISO4178:1980 as European Standard EN24178:1992. As a consequence of implementing the Euro

12、pean Standard this British Standard is renumbered as BSEN24178 and any reference to BS 6051 should be read as a reference to BSEN24178. Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a British Standard without deviation. Some term

13、inology and certain conventions are not identical with those used in British Standards; attention is especially drawn to the following. Wherever the words “International Standard” appear, referring to this standard, they should be read as “British Standard”. A British Standard does not purport to in

14、clude all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pag

15、es i and ii, theEN title page, pages2 to4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover.EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN24178 November1992 UDC

16、 621.798.1:620.165.7 Descriptors: Packaging, transport packing, complete- and filled packages, information, data acquisition, vibration English version Complete, filled transport packages Distribution trials Information to be recorded (ISO4178:1980) Emballages dexpdition complets et pleins Essais re

17、latifs au systme de distribution Informations noter (ISO4178:1980) Versandfertige Packstcke Probeversand Aufzuzeichnende Angaben (ISO4178:1980) This European Standard was approved by CEN on1992-10-30. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi

18、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member. This European Standard exists in three

19、official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standard bodies of Austri

20、a, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and UnitedKingdom. CEN European Committee for Standardization Comit Europen de Normalisation Europisches Komitee fr Normung Central Secretariat: rue d

21、e Stassart 36, B-1050 Brussels 1992 Copyright reserved to CEN members Ref.No.EN24178:1992EEN24178:1992 BSI 10-1999 2 Foreword In1991, ISO4178:1980 Complete, filled transport packages Distribution trials Information to be recorded was submitted to the CEN Primary Questionnaire procedure. Following th

22、e positive result of the CEN/CS Proposal ISO4178:1980 was submitted to the Formal Vote. The result of the Formal Vote was positive. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May1993, and con

23、flicting national standards shall be withdrawn at the latest by May1993. According to the CEN/CENELEC Internal Regulations, the following countries are bound to implement this European Standard: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherl

24、ands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.EN24178:1992 BSI 10-1999 3 0 Introduction The relationship between the hazards encountered by complete, filled transport packages in a distribution system and the resulting damage that may be sustained by the packages and/or their co

25、ntents is important in the development of new test methods, in refining existing test methods, and in the preparation of appropriate test schedules. The study of such relationships is facilitated if, when carrying out distribution trials involving complete, filled transport packages, adequate inform

26、ation is recorded and if such information is recorded on a uniform basis. This enables proper comparisons to be made of data obtained at different times and under various circumstances. The purpose of this International Standard is to aid such comparisons by specifying the information to be recorded

27、. Its contents are likely to be of interest to all concerned with distribution trials involving complete, filled transport packages. 1 Scope and field of application This International Standard specifies the information to be recorded when carrying out distribution trials involving complete, filled

28、transport packages. It is applicable to distribution systems in which the hazards of stacking, vertical impact, horizontal impact, and vibration are encountered or are likely to be encountered. 2 Information to be recorded The following information shall be recorded in the order given. Where possibl

29、e, results shall be set out in the form of a table. 2.1 Description of trial A brief description of the trial shall be given, including: a) the purpose of the trial; b) a brief description of the package(s) used; c) the starting point and destination of the package(s), if a journey was involved; d)

30、a description of the operations carried out on the package(s), and the order in which they were carried out; e) the time intervals between the various operations carried out on the package(s); f) the duration of each of the various operations carried out on packages; g) the modes of transport, if an

31、y, involved at each stage of the trial. 2.2 Results of trial The results of the trial shall be given and may be quoted in terms of the reduction in quality of the package and/or its contents, by the extent of loss of package contents, by the extent of damage to the package and/or its contents, or in

32、 terms of measurements made on the package and/or the contents. Preferably, the results shall be in such terms that changes in the factors under investigation in the trial can be correctly assigned to the operations and hazards in the distribution system that produce them. 2.3 Package A description

33、of each package shall be given, including: a) mass, in kilograms; b) dimensions (actual), in millimetres; c) the nature of the packaging, including fittings and method of sealing; d) the contents; e) the marking of the package; f) the handling aids attached or available for use. 2.4 Hazards in trial

34、 Climatic conditions at each operation or hazard in the trial shall be recorded, preferably by means of a continuous recorder. Where necessary, operations involving the same hazard shall be recorded separately. Information shall be recorded for each type of hazard as follows. 2.4.1 Stacking The foll

35、owing information shall be recorded for each stage in the trial at which packages were stacked: a) the number of packages stacked; b) the number of packages on which no load was superimposed; c) the attitude of each package; d) the height of the stack and, if the packages in the stack were assorted,

36、 the average density of the stack; e) the nature of the upper and lower loading surfaces; f) the duration of loading of packages, preferably in the form of a cumulative frequency curve; g) the stacking pattern, if the packages in the stack were identical; h) how measurements were carried out.EN24178

37、:1992 4 BSI 10-1999 2.4.2 Vertical impact The following information shall be recorded for each stage in the trial at which packages sustained vertical impact: a) the number of packages observed or measured; b) the number of packages which sustained no drop; c) the attitude of the packages; d) the dr

38、op heights, preferably in the form of a cumulative frequency distribution of drop height but, if this is not possible, the5 and50 and95%ile points shall be recorded whenever possible; e) the number of drops; f) the nature of the impact surfaces; g) how measurements were carried out; h) the time inte

39、rvals between drops, if more than one drop per package was involved. Where applicable the following information shall also be recorded: j) the vehicle or craft involved; k) the degree of loading of the vehicle; l) the positions in the vehicle at which measurements were made; m) the route and type of

40、 terrain (or sea or air conditions). 2.4.3 Horizontal impact The following information shall be recorded for each stage in the trial at which packages sustained horizontal impact: a) the number of packages observed or measured; b) the number of packages which sustained no impact; c) the attitude of

41、the packages; d) the form of the cumulative frequency distribution for velocity of impact, but if this is not possible, the5 and50 and95% ile points shall be recorded for1 to n impacts on an individual package; e) the number of impacts; f) the nature of the impact surfaces; g) how measurements were

42、carried out; h) the time interval between impacts, if the trial comprises several operations involving horizontal impact. Where applicable, the following information shall also be recorded: j) the vehicle or craft involved; k) the degree of loading of the vehicle; l) the positions in the vehicle at

43、which measurements were made; m) the route and type of terrain (or sea or air conditions). 2.4.4 Vibration The following information shall be recorded for each stage in the trial at which packages were vibrated: a) the number of packages on which measurements were made; b) the attitude of the packag

44、es; c) the vibration frequency and amplitude. If there was more than one vibration frequency or amplitude, the distribution curve shall be given; d) the duration of vibration; e) the magnitude of the superimposed load, if any, in kilograms; f) how measurements were carried out and the records analys

45、ed. Where applicable, the following information shall also be recorded: g) the vehicle or craft involved; h) the degree of loading of the vehicle; j) the positions in the vehicle at which measurements were made; k) the route and type of terrain (or sea or air conditions). 2.5 General information The

46、 following general information shall also be recorded: a) organization(s) and individuals concerned in the trial and in the analysis of the results; b) any other relevant information.blankBS EN 24178:1993 ISO4178:1980 BSI 389 Chiswick High Road London W4 4AL BSIBritishStandardsInstitution BSI is the

47、 independent national body responsible for preparing BritishStandards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Revisions BritishStandards are updated by amendment or revision. Users of BritishStandards should make sure that

48、they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using this BritishStandard would inform the Secretary of the technical committee responsible, the

49、 identity of which can be found on the inside front cover. Tel:02089969000. Fax:02089967400. BSI offers members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel:02089969001. Fax:02089967001. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as BritishS