BS EN 13972-2002 Rigid plastic containers - Definition of nominal brimful and total capacity and measurement of brimful and total capacity《硬质塑料容器 公称、充满和总容量的定义 公称、充满和总容量的测量》.pdf

《BS EN 13972-2002 Rigid plastic containers - Definition of nominal brimful and total capacity and measurement of brimful and total capacity《硬质塑料容器 公称、充满和总容量的定义 公称、充满和总容量的测量》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13972-2002 Rigid plastic containers - Definition of nominal brimful and total capacity and measurement of brimful and total capacity《硬质塑料容器 公称、充满和总容量的定义 公称、充满和总容量的测量》.pdf（12页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13972:2002 Rigid plastics containers Definition of nominal, brimful and total capacity and measurement of brimful and total capacity The European Standard EN 13972:2002 has the status of a British Standard ICS 55.100; 55.140 BS EN 13972:2002 This British Standard, having been

2、prepared under the direction of the Consumer Products and Services Sector Policy and Strategy Committee, was published under the authority of the Standards Policy and Strategy Committee on 21 October 2002 BSI 21 October 2002 ISBN 0 580 40621 0 National foreword This British Standard is the official

3、English language version of EN 13972:2002. The UK participation in its preparation was entrusted by Technical Committee PKW/5, Primary and transport packaging, to Subcommittee PKW/5/25, Rigid plastics packaging, which has the responsibility to: A list of organizations represented on this subcommitte

4、e can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Sear

5、ch” facility of the BSI Electronic Catalogue or of British Standards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal ob

6、ligations. aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summar

7、y of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 9 and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEU

8、ROPENNE EUROPISCHENORM EN13972 October2002 ICS55.100;55.140 Englishversion RigidplasticscontainersDefinitionofnominal,brimfulandtotal capacityandmeasurementofbrimfulandtotalcapacity ConteneursenplastiquerigideDfinitiondescapacits nominale,rasbordsettotale,etmesuragedescapacits rasbordsettotale Forms

9、tabileKunststoffbehlterDefinitiondesNenn,des RandvollunddesGesamtvolumenssowieMessungdes RandvollvolumensunddesGesamtvolumens ThisEuropeanStandardwasapprovedbyCENon19August2002. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardt

10、hestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nsla

11、tion undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Iceland,Ireland,Italy,Luxembourg,Malta,Netherlands,Norway,Po

12、rtugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2002CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnationalMembers. Ref.No.EN13972:200

13、2EEN13972:2002(E) 2 Contents page Foreword3 Introduction .4 1 Scope 5 2 Normativereferences 5 3 Termsanddefinitions. .5 4 Principle6 5 Sampling.6 6 Apparatus .6 7 Procedureforthemeasurementofbrimfulcapacity . 6 8 Procedureforthemeasurementoftotalcapacity. .7 9 Calculationofcapacities. 7 10 Testrepor

14、t 8 Bibliography 9EN13972:2002(E) 3 Foreword ThisdocumentEN13972:2002hasbeenpreparedbyTechnicalCommitteeCEN/TC 261“Packaging“,the secretariatofwhichisheldbyAFNOR. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidenticaltextor byendorsement,atthelatestbyApril2003,

15、andconflictingnationalstandardsshallbewithdrawnatthelatestby April2003. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark,Finland, France,Germany,Greece,Iceland,Ireland,I

16、taly,Luxembourg,Malta,Netherlands,Norway,Portugal,Spain, Sweden,SwitzerlandandtheUnitedKingdom.EN13972:2002(E) 4 Introduction Thepurposeofpackagingisthecontainment,protection,distributionandpromotionofproducts.Amajorroleis preventionofproductdamageand/orproductwaste. ThisEuropeanStandardwasdeveloped

17、totestthedesignofacontainerandtoproviderequirementsandtest procedurestomeetrecommendationsoncapacities.EN13972:2002(E) 5 1Scope ThisEuropeanStandardspecifiesagravimetricmethodfordeterminingthebrimfulandtotalcapacitiesofplastic bottlesandjarsupto5l,ofplasticcanisters/jerricanswithanominalvolumeupto20

18、landofplasticpailswitha nominalvolumeupto60l. NOTE Plasticsbottles,jarscanisters/jerricansandpailsarereferredtoas“containers”inthisstandard. 2 Normativereferences ThisEuropeanStandardincorporatesbydatedorundatedreference,provisionsfromotherpublications.These normativereferencesarecitedattheappropria

19、teplacesinthetext,andthepublicationsarelistedhereafter.For datedreferences,subsequentamendmentstoorrevisionsofanyofthesepublicationsapplytothisEuropean Standardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferencesthelatesteditionofthe publicationreferredtoapplies(includingamendments). E

20、N13974, RigidplasticscontainersSpecificationoftolerancefordimensions,weightandvolume. 3 Termsanddefinitions ForthepurposeofthisEuropeanStandard,thetermsanddefinitionsgiveninEN13974:2002(someofwhichare repeatedbelowforconvenience)andthefollowingapply. 3.1 plasticsbottle rigidplasticscontainerwithshou

21、lders,withasmallapertureandgenerallyblowmoulded EN13974:2002 3.2 plasticsjar rigidplasticscontainerofanybaseshape,withanaperturewithanareasimilartothatofthebase EN13974:2002 3.3 plasticscanister/jerrican rigidplasticscontainerwithmostlyrectangularorcircularsection NOTE Anapertureonthetoporsideoftheb

22、odyandcarryingdeviceisusual. EN13974:2002 3.4 pail rigidplasticscontainerofanyshape,thetopofwhichisgreaterthanorequaltotheareaofthebottom.The containerhasalidwithorwithoutaleakproofsealandisgenerallynestable EN13974:2002 3.5 nominalcapacity capacityforwhichthecontainerisdesignedEN13972:2002(E) 6 3.6

23、 brimfulcapacity volumeofwaterinlitresheldbythecontainerwhenfilledthroughthefillingorificetothepointofoverflowing 3.7 totalcapacity totalinternalvolumeoftheclosedcontainer 4Principle Calculationofthecapacitiesofaplasticcontainerfromthemassofthewaterfillingthecontainer. 5Sampling Thetestshallbeperfor

24、medonapredeterminednumberofcontainerswhichshallberepresentativeofthe consignment. NOTE Containersandclosuresshouldbetestednotearlierthan48hafterproduction. 6Apparatus 6.1Balance Balancewithanaccuracyofatleast0,1%oftheweightbeingmeasured. 6.2Thermometer Thermometer,withascalerangegraduatedinincrement

25、sofnomorethan1C,withanaccuracyof1C. 6.3Device Device,tomaketwoholesinthecontainerorlid. 6.4Testingliquid Testingliquid,normallytapwaterat23C1C,wateratothertemperaturesmaybeusedbyagreementbutwith thesametolerance. NOTE Thetemperaturerangehasbeenlimitedto1Cbecausetestshaveshownthattheexpansionofplasti

26、c containerscannotbeneglectedifbroadertemperaturerangesareused. 7 Procedureforthemeasurementofbrimfulcapacity 7.1 Expressionofresults Measurementofthebrimfulcapacityshallbeinaccordancewith7.2to7.8. 7.2 Determinethemassofeachemptycontainerwithouttheclosureorlidandrecordthevaluesing. 7.3 Standtheconta

27、ineronthebalance. 7.4 Fillthecontainerwithwateratthetesttemperatureuntilitbeginstooverflow. 7.5 Removeanywaterthathasoverflowedontotheoutsidesurfaceofthecontainerorthebalance.EN13972:2002(E) 7 7.6 Recordthemassingandtemperatureofthefilledcontainer. 7.7 Calculatethemassofthewaterbysubtractingthemasso

28、ftheemptycontainerfromthemassofthefilled containering. 7.8 Determinethebrimfulcapacityinaccordancewithclause7. 8 Procedureforthemeasurementoftotalcapacity 8.1 Expressionofresults Measurementofthetotalcapacityshallbeinaccordancewith8.2to8.9. 8.2 Preparation a) Forbottles/jars,usethecontainerandclosur

29、e; b) forcanisters/jerricans,usethecontainerandclosure,drillingtwoholesinthehighestplaceofthecontainer; c) forpails,usethecontainerandlid,drillingtwoholesinthelidofthecontaineronalinefromtheouterrimtothe centreofthelid. 8.3 Determinethemassofeachemptycontainerincludingtheclosure/lidandrecordthevalue

30、sing. 8.4 Filltheemptycontainerwithwateratthetesttemperature: a) forbottles/jars,filltototalcapacity; b) forcanisters/jerricans,usingoneofthetwodrilledholesinthehighestpositionpossible,filluntilthewaterruns outofthesecondhole.Ensurethatallentrainedairisremoved.Thencontinuetofilltototalcapacity; c) f

31、orpails,usingoneofthetwodrilledholesfilluntilthewaterrunsoutofthesecondhole.Ensurethatall entrainedairisremoved.Thencontinuetofillingtototalcapacity. 8.5 Sealthecontainer: a) forbottles/jars,replacetheclosure; b) forcanisters/jerricans,sealtheholeswithatapeofnegligiblemass; c) forpails,sealtheholesw

32、ithatapeofnegligiblemass. 8.6 Removeanysurfacewaterfromtheoutsideofthecontainer. 8.7 Placethecontaineronthebalanceandrecordthemassofthefilledcontaineringandthetemperature. 8.8 Calculatethemassofthewaterbysubtractingthemassoftheemptycontainerfromthemassofthefilled containerg. 8.9 Determinethetotalcap

33、acityinaccordancewith8. 9 Calculationofcapacities 9.1 General Thecapacityofthecontainershallbeexpressedinmillilitresorlitrestothreesignificantfigures,andiscalculated fromthedifferencebetweenthemassofthefilledandemptycontainer.EN13972:2002(E) 8 9.2 Determinethecapacitybyusingtheequation Capacity = m

34、VCF Where m isthemeasuredmassofwater,ingrams VCF istheVolumeCorrectionFactorforwateratthetesttemperature. VolumeCorrectionFactorsforwaterat23C:=1,00247 1) NOTE Alistofcorrectionfactorsfortherange12Cto30CisgiveninTable1ofENISO902:19992. 9.3 Exampleofacalculation: Testtemperature =23C Massofwater =550

35、0g Capacity =5500 1,00247=5513,585ml=5510mlor5,51l 10 Testreport Thetestreportshallincludethefollowinginformation: a) areferencetothisEuropeanStandard; b) adescriptionofthecontainer(i.e.design,name,supplieretc.)andtypeofplasticsmaterial; c) conditioningstatus,ifthereisanyconditioningrequestedforthep

36、rocessandmaterialused. EXAMPLE Timebetweenmanufactureandmeasurement,annealingprocessesetc. d) areportofthesamplingprocedureused; e) thedateofthetest; f) thenumberofreplicatestested; g) thenominalcapacityofthecontainer; h) thecavitynumber,ifapplicable; i) theaverageresultofallcontainerstested; j) the

37、brimfuland/ortotalcapacityofeachcontainer;identificationofcontainerswhichdidnotsatisfythespecified requirements,ifany; k) temperatureofthewaterusedforthecapacitydetermination; l) acalculationtoascertainwhetherthecontainerscomplywiththeacceptancecriteria,ifany; m) thenameandsignatureofthepersonconduc

38、tingthetest. 1 ) Reference:WalterWittenberger: RechneninderChemie (SpringerVerlagNewYork/Vienna)1.EN13972:2002(E) 9 Bibliography 1Walter Wittenberger: RechneninderChemie (SpringerVerlagNewYork/Vienna). 2 ENISO902:1999, LightgaugemetalcontainersDefinitionsanddeterminationofdimensionsandcapacities Par

39、t2:Generalusecontainers(ISO902:1997).BS EN 13972:2002 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is inco

40、rporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if any

41、one finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: +44 (0)20 8996 9000. Fax: +44 (0)20 8996 7400. BSI offers members an individual updating serv

42、ice called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: +44 (0)20 8996 9001. Fax: +44 (0)20 8996 7001. Email: ordersbsi-

43、. Standards are also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide

44、 range of information on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: +44 (0)20 8996 7111. Fax: +44 (0)20 8996 7048. Email: infobsi-. Subscri