BS EN 13454-1-2004 Binders composite binders and factory made mixtures for floor screeds based on calcium sulfate - Definitions and requirements《硫酸钙基地板找平层用粘合剂、合成粘合剂和工厂制混合物 定义和要求》.pdf

《BS EN 13454-1-2004 Binders composite binders and factory made mixtures for floor screeds based on calcium sulfate - Definitions and requirements《硫酸钙基地板找平层用粘合剂、合成粘合剂和工厂制混合物 定义和要求》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13454-1-2004 Binders composite binders and factory made mixtures for floor screeds based on calcium sulfate - Definitions and requirements《硫酸钙基地板找平层用粘合剂、合成粘合剂和工厂制混合物 定义和要求》.pdf（30页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 13454-1:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate Part 1: Definitions and requirements The European Standard EN 13454-1:2004 has the status of a British Standard ICS 01.040.91; 91.100.10; 91.100.50 BS EN 13454-1:2004 T

2、his British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 December 2004 BSI 1 December 2004 ISBN 0 580 44933 5 National foreword This British Standard is the official English language version of EN 13454-1:2004. The UK participation in its preparation

3、 was entrusted by Technical Committee B/544, Plastering, rendering, dry lining, to Subcommittee B/544/1, Gypsum plasters, cast gypsum and ancillaries, which has the responsibility to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-referenc

4、es The British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British St

5、andards Online. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to t

6、he responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside f

7、ront cover, the EN title page, pages 2 to 27 and a back cover. The BSI copyright notice displayed in this document indicates when the document was last issued. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN134541 September2004 ICS01.040.91

8、;91.100.10;91.100.50 Englishversion Binders,compositebindersandfactorymademixturesforfloor screedsbasedoncalciumsulfatePart1:Definitionsand requirements Liants,liantscompositesetmlangesfabriqusenusine basedesulfatedecalciumpourchapesdesolPartie1: Dfinitionsetspcifications CalciumsulfatBinder,Calcium

9、sulfatCompositbinderund CalciumsulfatWerkmrtelfrEstricheTeil1:Begriffeund Anforderungen ThisEuropeanStandardwasapprovedbyCENon24June2004. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswhichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalt

10、eration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheCentralSecretariatortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(English,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmembe

11、rintoitsownlanguageandnotifiedtotheCentralSecretariathasthesamestatusast heofficial versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,Cyprus,CzechRepublic,Denmark,Estonia,Finland,France, Germany,Greece,Hungary,Iceland,Ireland,Italy,Latvia,Lithuania,Luxembourg,Malta,Netherlands,Norwa

12、y,Poland,Portugal, Slovakia, Slovenia,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2004CEN Allrightsofexploitationinanyformandbyanymeansreserved worldwideforCENnati

13、onalMembers. Ref.No.EN134541:2004:EEN 13454-1:2004 (E) 2 Contents Foreword4 1 Scope5 2 Normative references5 3 Terms and definitions .5 4 Types of binders and factory made mixtures .6 4.1 Calcium sulfate binders (CAB) .6 4.2 Calcium sulfate composite binders (CAC)6 4.3 Factory made mixtures (CA).6 5

14、 Requirements for binders (CAB; CAC)7 5.1 General7 5.1.1 Reaction to fire.7 5.1.2 Release of regulated substances.7 5.2 Content of calcium sulfate (CaSO 4 ).7 5.3 pH7 5.4 Setting times7 5.5 Strength7 5.6 Shrinkage and swelling.8 6 Requirements for factory made mixtures CA .8 6.1 General8 6.2 Reactio

15、n to fire.8 6.3 Release of regulated substances.8 6.4 Water vapour permeability8 6.5 Impact sound insulation .8 6.6 Thermal resistance9 6.7 Chemical resistance9 6.8 pH9 6.9 Consistency9 6.9.1 General9 6.9.2 Flowing mixtures.9 6.9.3 Highly plastic mixtures .9 6.9.4 Stiff mixtures9 6.10 Working time9

16、6.11 Strength10 6.11.1 Compressive strength.10 6.11.2 Flexural strength10 6.12 Shrinkage and swelling.10 6.13 Other characteristics.11 7 Evaluation of conformity.11 7.1 General11 7.2 Initial type testing 11 7.3 Factory production control.11 7.4 Technical requirements for binders (CAB), composite bin

17、ders (CAC) and factory made mixtures (CA) .12 8 Designation12 9 Marking, labelling and packaging 13 9.1 Binders (CAB) and composite binders (CAC) 13 9.2 Factory made mixtures (CA).13 10 Conformity criteria and assessment procedure.14 10.1 General14 EN 13454-1:2004 (E) 3 10.2 Statistical conformity c

18、riteria .15 10.2.1 General15 10.2.2 Inspection by variables.16 10.2.3 Inspection by attributes17 10.3 Assessment based on individual results for factory made mixtures 17 10.4 Conformity requirements17 Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Constr

19、uction Products Directive .19 ZA.1 Scope and relevant characteristics .19 ZA.2 Procedures for attestation of conformity of binders and composite binders based on calcium sulfate .20 ZA.2.1 Systems of attestation of conformity 20 ZA.2.2 EC Certificate and declaration of conformity .23 ZA.3 CE marking

20、 and labelling24 Bibliography27 EN 13454-1:2004 (E) 4 Foreword This document (EN 13454-1:2004) has been prepared by Technical Committee CEN/TC 241 “Gypsum and gypsum based products”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, e

21、ither by publication of an identical text or by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by June 2006. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association,

22、 and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document for binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate consists of two part

23、s: Part 1: Definitions and requirements Part 2: Test methods This document specifies binders, composite binders and factory made mixtures where the principal active constitu- ent is calcium sulfate. The requirements in EN 13454-1 on binders and composite binders are based on the results of tests acc

24、ording to EN 13454-2. The requirements on factory made mixtures for floor screeds based on calcium sulfate are in accordance with EN 13813. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following coun- tries are bound to implement this European Standa

25、rd: Austria, Belgium, Cyprus, Czech Republic, Denmark, Esto- nia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 13454-1:2004 (E) 5

26、1 Scope This document applies to calcium sulfate binders and composite binders made of calcium sulfate used for the manufacture of floor screeds for interior use in buildings. It also includes requirements for factory made mixtures made of calcium sulfate used for the manufacture of floor screeds wh

27、ich are given in EN 13813. This document does not cover the application of floor screeds. Floor screeds made with products covered by this document may contribute to thermal and sound insulation and fire protection of the floor. 2 Normative references The following referenced documents are indispens

28、able for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 12086, Thermal insulating products for building applications - Determination of water vapour t

29、ransmission prop- erties. EN 13454-2:2003, Binders, composite binders and factory made mixtures for floor screeds based on calcium sul- fate - Part 2: Test methods. EN 13501-1, Fire classification of construction products and building elements - Part 1:Classification using test data from reaction to

30、 fire tests. EN 13813:2002, Screed material and floor screeds - Screed material - Properties and requirements. EN 13892-2, Methods of test for screed materials - Part 2: Determination of flexural and compressive strength. EN ISO 140-6, Acoustics - Measurement of sound insulation in buildings and of

31、building elements - Part 6: Labora- tory measurements of impact sound insulation of floors (ISO 140-6:1998). 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 calcium sulfate constituents calcium sulfate in its various dehydration phases, for e

32、xample hemihydrate and anhydrite 3.2 additives materials added to calcium sulfate binder or mixture by the manufacturer to influence the chemical and/or the physical properties NOTE Additives are, for example, fillers, pozzolans, pigments and artificial resins 3.3 admixtures materials added to the b

33、inder or mixture in small quantities and which, by chemical or physical action or both, change the properties of the calcium sulfate constituent, e.g. its workability, hardening or setting NOTE Admixtures are, for example accelerators, retarders and plasticizers EN 13454-1:2004 (E) 6 3.4 aggregates

34、materials consisting of uncrushed and/or crushed mineral material with particle sizes and shapes suitable for the production of floor screeds 3.5 screed layer or layers of screed material laid in situ, directly onto a base, bonded or unbonded, or onto an intermediate layer or insulating layer, to ob

35、tain one or more of the following purposes: to obtain a defined level, to carry the final flooring, to provide a wearing surface 3.6 binder material used for the purpose of holding solid particles together in a coherent mass 3.7 consistency fluidity of fresh screed material which characterises its e

36、ase of use 3.8 flow diameter dimension for consistency of stiff factory made mixtures 3.9 spread dimension for consistency of flowing and highly plastic mixtures 4 Types of binders and factory made mixtures 4.1 Calcium sulfate binders (CAB) Calcium sulfate binders (CAB) consist of calcium sulfate co

37、nstituents binding by hydration and may contain admix- tures and additives (see 5.2.a). 4.2 Calcium sulfate composite binders (CAC) Calcium sulfate composite binders (CAC) consist of calcium sulfate binders (CAB) and contain additional additives (see 5.2.b). 4.3 Factory made mixtures (CA) Factory ma

38、de mixtures (CA) consist of binders or composite binders and aggregates and may contain admixtures and additives with or without water. The means of determining the suitability of the aggregates for use in factory made mixtures shall be recorded in the manufacturers documentation of the factory prod

39、uction control. With respect to the manufacturing methods, factory made mixtures shall be suitable for application in one of the three consistencies: stiff, highly plastic or flowing (see 6.9). If calcium sulfate binders or calcium sulfate composite binders, as specified in this document, are used f

40、or the manufacture of factory made mixtures, the tests specified in EN 13454-2 for determination of the pH value and for determination of shrinkage and swelling need not to be carried out. Factory made mixtures can be produced and delivered as: EN 13454-1:2004 (E) 7 a) prebatched (dry) in a factory

41、and mixed on the construction site in factory specified proportions and conditions, b) premixed (dry) in a factory and mixed on the construction site by adding water, c) ready mixed (wet) which is supplied to the construction site in a pre-mixed and gauged condition. 5 Requirements for binders (CAB;

42、 CAC) 5.1 General 5.1.1 Reaction to fire Calcium sulfate binders (CAB and CAC) are reaction to fire Class A1 flwithout testing according to Commission De- cision 96/603/EC as amended, provided that they contain less than 1 % by mass or volume of organic material, whichever is the more onerous. For p

43、roducts which contain 1 % or more of organic material, the product shall be tested and classified in accordance with EN 13501-1. 5.1.2 Release of regulated substances NOTE For CE marking purposes see Annex ZA. 5.2 Content of calcium sulfate (CaSO 4 ) The content of calcium sulfate in the following m

44、aterials shall be: a) calcium sulfate binders (CAB): 85 % calcium sulfate by mass, b) calcium sulphate composite binders (CAC): 50 % and 85 % calcium sulfate by mass. The content of calcium sulfate shall be determined as specified in EN 13454-2. 5.3 pH The pH of binders shall be 7,0. The pH shall be

45、 determined as specified in EN 13454-2. 5.4 Setting times The setting times shall be as follows: a) initial setting time 30 min, b) final setting time 12 h. The setting times shall be determined as specified in EN 13454-2. 5.5 Strength The strength of binders shall comply with the requirements of Ta

46、ble 1. EN 13454-1:2004 (E) 8 Table 1 Strengths of binders (CAB) and (CAC) defined as characteristics values Strength class Minimum flexural strength N/mm 2 Minimum compressive strength N/mm 2 Tested after 3 days 28 days 3 days 28 days 20 1,5 4,0 8,0 20,0 30 2,0 5,0 12,0 30,0 40 2,5 6,0 16,0 40,0 The

47、 strength of binders shall be determined as specified in EN 13454-2. 5.6 Shrinkage and swelling The values for shrinkage and swelling shall not exceed 0,2 mm/m. Shrinkage and swelling shall be determined as specified in EN 13454-2. 6 Requirements for factory made mixtures CA 6.1 General NOTE Factory

48、 made mixtures placed on the market of the European Economic Area, and therefore subject to conformity with the construction Products Directive, are covered by EN 13813; tests performed to EN 13454-2 may, however, be taken into account to demonstrate conformity to EN 13813. Factory made mixtures are, though, marked in accordance with EN 13813. 6.2 Reaction to fire Factory made mixtures (CA) are reaction to fire Class A1 flwithout testing according to Commission Decision 96/603/EC as amended, provided that they contain less than 1 % b