BS EN 13164-2012 Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification《建筑物隔热产品 工厂制聚苯乙烯泡沫(XPS)制品 规格》.pdf

《BS EN 13164-2012 Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification《建筑物隔热产品 工厂制聚苯乙烯泡沫(XPS)制品 规格》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13164-2012 Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification《建筑物隔热产品 工厂制聚苯乙烯泡沫(XPS)制品 规格》.pdf（52页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13164:2012Thermal insulation productsfor buildings Factory madeextruded polystyrene foam(XPS) products SpecificationCopyright European Committee for Standardization Provide

2、d by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13164:2012. It supersedes BS EN 13164:2008, which is withdrawn.The UK participation

3、 in its preparation was entrusted to T e c h n i c a l C o m m i t t e e P R I / 7 2 / 2 , P o l y s t y r e n e .A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract.

4、 Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 69979 5 ICS 91.100.60 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the auth

5、ority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IH

6、S-,-,-BS EN 13164:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13164 November 2012 ICS 91.100.60 Supersedes EN 13164:2008English Version Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification Produits isolants thermiques pour le

7、btiment - Produits manufacturs en mousse de polystyrne extrud (XPS) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation This European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply with the CE

8、N/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Ce

9、ntre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as t

10、he official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Nethe

11、rlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of explo

12、itation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13164:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012EN 1316

13、4:2012 (E) 2 Contents Page Foreword 51 Scope 72 Normative references 73 Terms, definitions, symbols, units, abbreviated terms .84 Requirements 124.1 General . 124.2 For all applications . 124.2.1 Thermal resistance and thermal conductivity . 124.2.2 Length, width, squareness, flatness . 134.2.3 Thic

14、kness 134.2.4 Reaction to fire of the product as placed on the market 144.2.5 Durability characteristics . 144.3 For specific applications 144.3.1 General . 144.3.2 Dimensional stability under specified conditions . 144.3.3 Deformation under specified compressive load and temperature conditions . 15

15、4.3.4 Compressive stress or compressive strength 154.3.5 Tensile strength perpendicular to faces 164.3.6 Compressive creep . 164.3.7 Water absorption 174.3.8 Freeze-thaw resistance 174.3.9 Water vapour transmission . 184.3.10 Release of dangerous substances 184.3.11 Reaction to fire of the product i

16、n standardized assemblies simulating end-use applications . 184.3.12 Continuous glowing combustion 194.3.13 Shear strength . 195 Test methods . 195.1 Sampling 195.2 Conditioning 195.3 Testing . 195.3.1 General . 195.3.2 Thermal resistance and thermal conductivity . 196 Designation code 217 Evaluatio

17、n of conformity 227.1 General . 227.2 Initial type testing . 227.3 Factory production control 228 Marking and labelling . 23Annex A (normative) Determination of the declared values of thermal resistance and thermal conductivity . 24A.1 General . 24A.2 Input data . 24A.3 Declared values. 24A.3.1 Gene

18、ral . 24A.3.2 Case where thermal resistance and thermal conductivity are declared . 24A.3.3 Case where only thermal resistance is declared . 25Annex B (normative) Initial type testing (ITT) and Factory production control (FPC) 27Copyright European Committee for Standardization Provided by IHS under

19、license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012EN 13164:2012 (E) 3 Annex C (normative) Determination of the aged values of thermal resistance and thermal conductivity . 30C.1 General . 30C.2 Procedure for XPS foam without diffusion

20、tight facings 30C.2.1 Principle 30C.2.2 Sample preparation . 30C.2.3 Procedure . 30C.3 Procedure for XPS foam for use with diffusion tight facing on both sides 31C.3.1 Principle 31C.3.2 Ageing procedure 31C.4 Determination of value after ageing: “aged value” 31C.4.1 Determination of aged value for X

21、PS products without diffusion tight facings on both sides 31C.4.2 Determination of aged value for XPS products for use with diffusion tight facing on both sides 32C.5 Blowing agent 33C.6 Product grouping 33Annex D (normative) XPS multi-layered insulation products 34D.1 General . 34D.2 Requirements .

22、 34D.2.1 For all applications 34D.2.2 For specific applications 35D.3 Test methods . 35D.4 Evaluation of conformity 35Annex E (informative) Additional properties 36E.1 General . 36E.2 Behaviour under cyclic loading . 36E.3 Compressive modulus of elasticity . 36E.4 Bending strength . 36E.5 Determinat

23、ion of volume percentage of closed cells 36Annex F (informative) Plan for cutting test specimen . 38Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive . 40ZA.2 Procedures for attestation of conformity of factory made extruded

24、polystyrene foam products . 42ZA.2.1 Systems of attestation of conformity 42Bibliography 48Tables Table 1 Tolerances of length, width, squareness and flatness 13 Table 2 Classes for thickness tolerances 13 Table 3 Dimensional stability under specified conditions 15Table 4 Levels for deformation unde

25、r specified compressive load and temperature conditions . 15 Table 5 Levels for compressive stress or compressive strength . 16 Table 6 Levels for tensile strength, perpendicular to faces . 16 Table 7 Levels for long term water absorption by total immersion 17 Table 8 Levels for long term water abso

26、rption by diffusion . 17 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012EN 13164:2012 (E) 4 Table 9 Test methods, test specimens and conditions . 20 Table A.1 Va

27、lues for k for one sided 90 % tolerance interval with a confidence level of 90 %. 25 Table B.1 Minimum number of tests for ITT and minimum product testing frequencies 27Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 29Table E.1 Test methods, test specimens,

28、conditions and minimum testing frequencies . 37Table ZA.1 Relevant clauses for extruded polystyrene foam products 41 Table ZA.2 Systems of attestation of conformity 42Table ZA.3.1 Assignment of evaluation of conformity tasks for products under system 1 for reaction to fire and system 3 for other cha

29、racteristics 43Table ZA.3.2 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 44Figures Figure ZA.1 Example CE marking information 47Copyright European Committee for Standardization Provided by IHS under license with CENN

30、ot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012EN 13164:2012 (E) 5 Foreword This document (EN 13164:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This E

31、uropean Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements

32、 of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13164:2008. This document has been prepared under a mandate given to CEN by the European Commission and the European Free

33、 Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Compared with EN 13164:2008, the main changes are: a) better harmonisation between the individual standards of the

34、package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes of some editorial and technical content and addition of information on some specific items such as for XPS: Annex C; d) addition to links to EN 15715, Thermal

35、 insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to the Annex ZA. This European Standard is one of a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appro

36、priate. In pursuance of resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products; all of wh

37、ich come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products f

38、or buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleN

39、o reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012EN 13164:2012 (E) 6 EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) prod

40、ucts Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory m

41、ade products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reductions in energy used and emissions produced during the installed life of the insulation products exceeds by far the energy used and emiss

42、ions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Fin

43、land, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee fo

44、r Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13164:2012EN 13164:2012 (E) 7 1 Scope This European Standard specifies the requirements for factory made products of extruded polystyrene foam, with or wit

45、hout facings or coatings, which are used for thermal insulation of buildings. The products are manufactured in the form of boards which are also available with special edge and surface treatment (tongue the performance of systems incorporating these products is not covered. This standard describes p

46、roduct characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. The standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a give

47、n application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 mK/W or a declared thermal conductivity greater than 0,060 W/(mK) at 10 C are not covered by this standard. This standard does not cover in situ insulation products,

48、 nor products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14307), or civil engineering applications (covered by EN 14934). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited ap