BS EN 13163-2012 Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification《建筑物隔热产品 工厂制膨胀聚乙烯(EPS)产品 规范》.pdf

《BS EN 13163-2012 Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification《建筑物隔热产品 工厂制膨胀聚乙烯(EPS)产品 规范》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13163-2012 Thermal insulation products for buildings Factory made expanded polystyrene (EPS) products Specification《建筑物隔热产品 工厂制膨胀聚乙烯(EPS)产品 规范》.pdf（60页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13163:2012Thermal insulation productsfor buildings Factory madeexpanded polystyrene (EPS)products SpecificationCopyright European Committee for Standardization Provided by

2、IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13163:2012. It supersedes BS EN 13163:2008, which is withdrawn.The UK participation in i

3、ts preparation was entrusted to T e c h n i c a l C o m m i t t e e P R I / 7 2 / 2 , P o l y s t y r e n e .A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User

4、s are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 69978 8 ICS 91.100.60 Compliance with a British Standard cannot confer immunityfrom legal obligations.This British Standard was published under the authority

5、of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-

6、BS EN 13163:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13163 November 2012 ICS 91.100.60 Supersedes EN 13163:2008English Version Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) products - Specification Produits isolants thermiques pour le btiment - P

7、roduits manufacturs en polystyrne expans (EPS) - SpcificationWrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus expandiertem Polystyrol (EPS) - SpezifikationThis European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply with the CEN/CENELEC Internal Regulation

8、s which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. Th

9、is European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN mem

10、bers are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portu

11、gal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in any form and by an

12、y means reserved worldwide for CEN national Members. Ref. No. EN 13163:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012EN 13163:2012 (E) 2 Contents Page Fo

13、reword 51 Scope 72 Normative references 73 Terms, definitions, symbols, units and abbreviated terms .93.1 Terms and definitions .93.2 Symbols, units and abbreviated terms . 104 Requirements 134.1 General . 134.2 For all applications . 134.3 For specific applications 165 Test methods . 225.1 Sampling

14、 225.2 Conditioning 225.3 Testing . 236 Designation code 267 Evaluation of conformity 277.1 General . 277.2 Initial type testing . 277.3 Factory production control 278 Marking and labelling . 27Annex A (normative) . 29A.1 General . 29A.2 Input data . 29A.3 Declared values. 29Annex B 31B.1 Initial ty

15、pe testing and factory production control 31B.2 Indirect testing for factory production control 36Annex C 38Annex D (normative) Multi layered EPS products 39D.1 General . 39D.2 Requirements 39D.3 Test methods . 40D.4 Evaluation of conformity 40Annex E (informative) Verification of the reaction to fi

16、re classification of raw materials 41E.1 General . 41E.2 Material covered by this annex . 41E.3 Preparation of samples 41E.4 Initial type tests for EPS raw material 41E.5 Factory Production Control for EPS raw material . 42E.6 Certification of conformity for EPS raw material . 42E.7 Continuous surve

17、illance of EPS raw material . 43Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012EN 13163:2012 (E) 3 E.8 Material certificate for EPS raw material . 43E.9 Requirem

18、ent for raw material supply 44Annex F (informative) Additional properties 45F.1 General . 45F.2 Long-term compressive behaviour . 45F.3 Shear behaviour 45F.4 Water vapour diffusion resistance factor . 46F.5 Examples of determination of thermal conductivity 46F.6 Additional information 47Annex ZA (in

19、formative) Clauses of this European Standard addressing the provisions of the EU Construction Products directive 48Bibliography 56Tables Table 1 Classes of dimensional tolerances . 15Table 2 Dimensional stability under specified temperature or specified temperature and humidity conditions. 16Table 3

20、 Levels for compressive stress at 10 % deformation . 17Table 4 Levels for bending strength 17Table 5 Levels of deformation under specified compressive load and temperature conditions 18Table 6 Levels for dynamic stiffness 20Table 7 Classes for thickness tolerances 21Table 8 Levels for compressibilit

21、y 21Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 30Table B.1 Number of tests for ITT and minimum product testing frequencies 31Table B.2 Minimum product testing frequencies for the reaction to fire characteristics 34Table C.1 Classification of EPS pr

22、oducts 38Table C.2 Classification EPS products with acoustical properties 38Table E.1 Testing frequency of raw material . 43Table F.1 Correlation between bending strength and shear strength . 45Table F.2 Tabulated values of water vapour diffusion resistance index and water vapour permeability . 46Ta

23、ble ZA.1 Relevant clauses for EPS and intended uses . 49Table ZA.2 Systems of attestation of conformity . 50Table ZA.3.1 Assignment of evaluation of conformity tasks for products under system 1 for reaction to fire and system 3 for other characteristics 51Copyright European Committee for Standardiza

24、tion Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012EN 13163:2012 (E) 4 Table ZA.3.2 Assignment of evaluation of conformity tasks for products under system 3 or 3 combined with system 4 for reaction to fire 52F

25、igures Figure F.1 Example of a relationship between thermal conductivity (at 50 mm reference thickness and 10 C mean temperature) apparent density for indirect testing of non infrared absorbing EPS . 47Figure ZA.1 Example CE marking information 55Copyright European Committee for Standardization Prov

26、ided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012EN 13163:2012 (E) 5 Foreword This document (EN 13163:2012) has been prepared by Technical Committee CEN/TC 88 “Thermal insulating materials and products”, the secretar

27、iat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the po

28、ssibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trad

29、e Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document supersedes EN 13163:2008. The main changes to EN 13163:2008 are: a) better harmonisation between the indiv

30、idual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new annex on multi-layered products; c) new annex on voluntary verification of the reaction to fire classification of raw materials; d) changes on some editorial and technical content and addit

31、ion of information on some specific items such as for EPS dimensional stability, compressibility; e) addition of links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; f) changes to the Annex ZA. This standard is one of

32、 a series of standards for thermal insulation products used in buildings, but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a European package of standards. The package of stan

33、dards comprises the following group of interrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Therm

34、al insulation products for buildings Factory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification Copyright European Committee for Standardization Provided by IHS under license w

35、ith CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012EN 13163:2012 (E) 6 EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification EN 13166, Thermal insulation products for buildings Facto

36、ry made phenolic foam (PF) products Specification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products f

37、or buildings Factory made expanded perlite board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The red

38、uction in energy used and emissions produced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following count

39、ries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Pol

40、and, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13163:2012EN 13163:20

41、12 (E) 7 1 Scope This European Standard specifies the requirements for factory made expanded polystyrene products, with or without rigid or flexible facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards or rolls or other pref

42、ormed ware (flat, tapered, tongue and grooves, shiplap, profiled etc.). Products covered by this standard are also used for sound insulation and in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard des

43、cribes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required class or level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The classes

44、and levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 mK/W or a declared thermal conductivity at 10 C greater than 0,060 W/(mK) are not covered by this standard. This standard does not cove

45、r in-situ insulation products (covered by FprEN 16025-1 and -2), products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14309), products intended to be used in civil engineering applications (covered by EN 14933) and products intended to be

46、used in beam and block systems in floors (covered by EN 15037-4). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references,

47、the latest edition of the referenced document (including any amendments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating produc

48、ts for building applications Determination of squareness EN 825, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1602, Thermal insulating products for building applicatio