BS EN 13162-2012 Thermal insulation products for buildings Factory made mineral wool (MW) products Specification《建筑物隔热产品 工厂生产矿棉(MW)产品 规格》.pdf

《BS EN 13162-2012 Thermal insulation products for buildings Factory made mineral wool (MW) products Specification《建筑物隔热产品 工厂生产矿棉(MW)产品 规格》.pdf》由会员分享，可在线阅读，更多相关《BS EN 13162-2012 Thermal insulation products for buildings Factory made mineral wool (MW) products Specification《建筑物隔热产品 工厂生产矿棉(MW)产品 规格》.pdf（46页珍藏版）》请在麦多课文档分享上搜索。

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 13162:2012Thermal insulation products for buildings Factory made mineral wool (MW) products SpecificationCopyright European Committee for Standardization Provided by IHS un

2、der license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13162:2012 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 13162:2012. It supersedes BS EN 13162:2008, which is withdrawn.The UK participation in its pre

3、paration was entrusted to T e c h n i c a l C o m m i t t e e B / 5 4 0 / 6 , F i b r o u s a n d i n o r g a n i c t h e r m a l insulation materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all th

4、e necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013.ISBN 978 0 580 69977 1 ICS 91.100.60 Compliance with a British Standard cannot confer immunityfromlegal obligations.This British St

5、andard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2013.Amendments issued since publicationDate T e x t a f f e c t e dCopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networkin

6、g permitted without license from IHS-,-,-BS EN 13162:2012EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 13162 November 2012 ICS 91.100.60 Supersedes EN 13162:2008English Version Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification Produits isolant

7、s thermiques pour le btiment - Produits manufacturs en laine minrale (MW) - Spcification Wrmedmmstoffe fr Gebude - Werkmig hergestellte Produkte aus Mineralwolle (MW) - Spezifikation This European Standard was approved by CEN on 6 October 2012. CEN members are bound to comply with the CEN/CENELEC In

8、ternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to a

9、ny CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official

10、versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norw

11、ay, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2012 CEN All rights of exploitation in a

12、ny form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13162:2012: ECopyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13162:2012EN 13162:2012 (E) 2

13、 Contents Page Foreword 31 Scope 52 Normative references 53 Terms, definitions, symbols, units and abbreviated terms .74 Requirements 105 Test methods . 176 Designation code 197 Evaluation of conformity 208 Marking and labelling . 21Annex A (normative) Determination of the declared values of thermal

14、 resistance and thermal conductivity . 23Annex B (normative) Initial type testing (ITT) and factory production control (FPC) . 25Annex C (normative) MW multi-layered insulation products 29Annex D (informative) Examples for the determination of the declared values of thermal resistance and thermal co

15、nductivity for a product or a product group 31Annex ZA (informative) Clauses of this European Standard addressing the provisions of the EU Construction Products Directive. 34Bibliography . 42Tables Table 1 Level and classes for thickness tolerances 11Table 2 Dimensional stability under specified tem

16、perature and humidity conditions . 13Table 3 Classes for thickness tolerances . 15Table 4 Levels for compressibility . 15Table 5 Test methods, test specimens and conditions . 18Table A.1 Values for k for one sided 90 % tolerance interval with a confidence level of 90 % . 24Table B.1 Minimum number o

17、f tests for ITT and minimum product testing frequencies 25Table B.2 Minimum product testing frequencies for the reaction to fire characteristics . 27Table D.1 test results . 31Table D.2 R test results . 32Table ZA.1 Relevant clauses for Mineral wool and intended use . 35Table ZA.2 Systems of attesta

18、tion of conformity 36Table ZA.3.1 Assignment of evaluation of conformity tasks for products under system 1 . 37Table ZA.3.2 Assignment of evaluation of conformity tasks for products under system 3 or system 3 combined with system 4 for reaction to fire 38Figures Figure ZA.1 Example CE marking inform

19、ation 41 Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13162:2012EN 13162:2012 (E) 3 Foreword This document (EN 13162:2012) has been prepared by Technical Committee CEN/T

20、C 88 “Thermal insulating materials and products”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be wit

21、hdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate give

22、n to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document supersedes EN 13162:2008. Compared with EN 1

23、3162:2008, the main changes are: a) better harmonisation between the individual standards of the package (EN 13162 to EN 13171) on definitions, requirements, classes and levels; b) new normative annex on multi-layered products; c) changes of some editorial and technical content and addition of infor

24、mation on some specific items such as for MW: lamella, compressibility; d) addition to links to EN 15715, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products; e) changes to Annex ZA. This standard is one of a series of standards for the

25、rmal insulation products used in buildings but this standard may be used in other areas where appropriate. In pursuance of Resolution BT 20/1993 revised, CEN/TC 88 have proposed defining the standards listed below as a package of documents. The package of standards comprises the following group of i

26、nterrelated standards for the specifications of factory made thermal insulation products, all of which come within the scope of CEN/TC 88: EN 13162, Thermal insulation products for buildings Factory made mineral wool (MW) products Specification EN 13163, Thermal insulation products for buildings Fac

27、tory made expanded polystyrene (EPS) products Specification EN 13164, Thermal insulation products for buildings Factory made extruded polystyrene foam (XPS) products Specification EN 13165, Thermal insulation products for buildings Factory made rigid polyurethane foam (PU) products Specification Cop

28、yright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13162:2012EN 13162:2012 (E) 4 EN 13166, Thermal insulation products for buildings Factory made phenolic foam (PF) products Spec

29、ification EN 13167, Thermal insulation products for buildings Factory made cellular glass (CG) products Specification EN 13168, Thermal insulation products for buildings Factory made wood wool (WW) products Specification EN 13169, Thermal insulation products for buildings Factory made expanded perli

30、te board (EPB) products Specification EN 13170, Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification EN 13171, Thermal insulation products for buildings Factory made wood fibre (WF) products Specification The reduction in energy used and emissions prod

31、uced during the installed life of insulation products exceeds by far the energy used and emissions made during the production and disposal processes. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this Europea

32、n Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Sloven

33、ia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13162:2012EN 13162:2012 (E) 5 1 Scope This European Standard

34、specifies the requirements for factory made mineral wool products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the mat blankets, boards or slabs. Products covered by this standard are also used in prefabricated thermal

35、 insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. This standard does not specify the required level of

36、 a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards. Products with a declared thermal resistance lower than 0,25 m2K/W or a declared therm

37、al conductivity greater than 0,060 W/(mK) at 10 C are not covered by this standard. This standard does not cover in situ insulation products (covered by EN 14064 parts 1 and 2) and products intended to be used for the insulation of building equipment and industrial installations (covered by EN 14303

38、). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any am

39、endments) applies. EN 822, Thermal insulating products for building applications Determination of length and width EN 823, Thermal insulating products for building applications Determination of thickness EN 824, Thermal insulating products for building applications Determination of squareness EN 825

40、, Thermal insulating products for building applications Determination of flatness EN 826, Thermal insulating products for building applications Determination of compression behaviour EN 1604, Thermal insulating products for building applications Determination of dimensional stability under specified

41、 temperature and humidity conditions EN 1606, Thermal insulating products for building applications Determination of compressive creep EN 1607, Thermal insulating products for building applications Determination of tensile strength perpendicular to faces EN 1609, Thermal insulating products for buil

42、ding applications Determination of short term water absorption by partial immersion EN 12086:1997, Thermal insulating products for building applications Determination of water vapour transmission properties EN 12087, Thermal insulating products for building applications Determination of long-term wa

43、ter absorption by immersion Copyright European Committee for Standardization Provided by IHS under license with CENNot for ResaleNo reproduction or networking permitted without license from IHS-,-,-BS EN 13162:2012EN 13162:2012 (E) 6 EN 12089, Thermal insulating products for building applications De

44、termination of bending behaviour EN 12090, Thermal insulating products for building applications Determination of shear behaviour EN 12430, Thermal insulating products for building applications Determination of behaviour under point load EN 12431, Thermal insulating products for building application

45、s Determination of thickness for floating floor insulation products EN 12667, Thermal performance of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Products of high and medium thermal resistance EN 12939, Thermal performa

46、nce of building materials and products Determination of thermal resistance by means of guarded hot plate and heat flow meter methods Thick products of high and medium thermal resistance EN 13172:2012, Thermal insulation products Evaluation of conformity EN 13501-1, Fire classification of constructio

47、n products and building elements Part 1: Classification using data from reaction to fire tests EN 13820, Thermal insulating materials for building applications Determination of organic content EN 13823, Reaction to fire tests for building products Building products excluding floorings exposed to the

48、 thermal attack by a single burning item EN 15715:2009, Thermal insulation products Instructions for mounting and fixing for reaction to fire testing Factory made products EN 29052-1, Acoustics Determination of dynamic stiffness Part 1: Materials used under floating floors in dwellings (ISO 9052-1) EN 29053, Acoustics Materials for acoustical applications Determination of air flow resistance (ISO 9053) EN ISO 354, Acoustics Measurement of sound absorpti