BS EN 10217-1-2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties《承压用焊接钢管 交付技术状态 规定室温特性.pdf

《BS EN 10217-1-2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties《承压用焊接钢管 交付技术状态 规定室温特性.pdf》由会员分享，可在线阅读，更多相关《BS EN 10217-1-2002 Welded steel tubes for pressure purposes - Technical delivery conditions - Non-alloy steel tubes with specified room temperature properties《承压用焊接钢管 交付技术状态 规定室温特性.pdf（44页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARDBS EN 10217-1:2002IncorporatingAmendment No. 1Welded steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature propertiesThe European Standard EN 10217-1:2002, with the incorporation of amendment A1:2005, has the sta

2、tus of a British StandardICS 23.040.10g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 10217-1:2002This British Standard, was published under t

3、he authority of the Standards Policy and Strategy Committee on 4 July 2002 BSI 6 March 2006ISBN 0 580 39841 2National forewordThis British Standard is the official English language version of EN 10217-1:2002, including amendment A1:2005. Together with BS EN 10216-1:2002 it supersedes BS 3601:1987 an

4、d BS 3059-1:1987 which are withdrawn.The start and finish of text introduced or altered by CEN amendment is indicated in the text by tags . Tags indicating changes to CEN text carry the number of the CEN amendment. For example, text altered by CEN amendment A1 is indicated in the text by .The UK par

5、ticipation in its preparation was entrusted by Technical Committee ISE/73, Steels for pressure purposes, to Subcommittee ISE/73/1, Steel tubes for pressure purposes, which has the responsibility to:A list of organizations represented on this subcommittee can be obtained on request to its secretary.C

6、ross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or o

7、f British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users of this publication are responsible for their correct application.Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to u

8、nderstand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises

9、a front cover, an inside front cover, the EN title page, pages 2 to 41 and a back cover.The BSI copyright date displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date Comments15473 6 March 2006 See national foreword1EUROPEAN STANDARD NO

10、RME EUROPENNE EUROPISCHE NORMEN 10217-1 May 2002 + A1 January 2005 ICS 23.040.10English version Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (includes amendment A1:2005) Tubes souds en acier pour s

11、ervice sous pression - Conditions techniques de livraison - Partie 1: Tubes en acier non alli avec caractristiques spcifies temprature ambiante (inclut lamendement A1:2005) Geschweite Stahlrohre fr Druckbeanspruchungen - Technische Lieferbedingungen - Teil 1: Rohre aus unlegierten Sthlen mit festgel

12、egten Eigenschaften bei Raumtemperatur (enthlt nderung A1:2005) This European Standard was approved by CEN on 25 April 2002. Amendment A1 was approved by CEN on 9 December 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Eu

13、ropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. This European Standard exists in three official versions (English,

14、 French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, De

15、nmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATIONEUR

16、OPISCHES KOMITEE FR NORMUNG Management Centre: rue de Stassart, 36 B-1050 Brussels 2002 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10217-1:2002 + A1:2005 EEN 10217-1:2002 (E) 2Contents1 SCOPE 52 NORMATIVE REFERENCES . 53 TERMS

17、 AND DEFINITIONS . 64 SYMBOLS .75 CLASSIFICATION AND DESIGNATION75.1 Classification .75.2 Designation 76 INFORMATION TO BE SUPPLIED BY THE PURCHASER76.1 Mandatory information76.2 Options .86.3 Example of an order 87 MANUFACTURING PROCESS 87.1 Steelmaking process.87.2 Deoxidation process .87.3 Tube m

18、anufacture and delivery conditions 98 Requirements.108.1 General .108.2 Chemical composition 108.3 Mechanical properties.128.4 Appearance and internal soundness. 138.5 Straightness .148.6 Preparation of ends.148.7 Dimensions, masses and tolerances 159 Inspection .209.1 Types of inspection.209.2 Insp

19、ection documents 209.3 Summary of inspection and testing. 2110 SAMPLING2310.1 Frequency of tests.2310.2 Preparation of samples and test pieces2411 TEST METHODS.2611.1 Chemical analysis 2611.2 Tensile test on base material .2611.3 Transverse tensile test on the weld.2611.4 Flattening test 2611.5 Drif

20、t expanding test.2611.6 Weld bend test .2711.7 Impact test2711.8 Leak tightness test 2811.9 Dimensional inspection 2911.10 Visual examination 2911.11 Non-Destructive Testing .2911.12 Retest, sorting and reprocessing 2912 MARKING2912.1 Marking to be applied2912.2 Additional marking 3013 PROTECTION .3

21、0Annex A (normative).31Annex ZA (informative) 40 Bibliography41EN 10217-1:2002 (E) 3ForewordThis document (EN 10217-1:2002) has been prepared by Technical Committee ECISS/TC 29, “Steel tubes and fittings for steel tubes“, the secretariat of which is held by UNI. This European Standard shall be given

22、 the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2002, and conflicting national standards shall be withdrawn at the latest by November 2002. This document has been prepared under a mandate given to CEN by the European Commiss

23、ion and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this document. Other parts of EN 10217 are: Part 2: Electric welded non-alloy and alloy steel tubes with

24、specified elevated temperature properties. Part 3: Alloy fine grain steel tubes. Part 4 : Electric welded non-alloy and alloy steel tubes with specified low temperature properties Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.Part 6: Subm

25、erged arc welded non-alloy steel tubes with specified low temperature properties. Part 7: Stainless steel tubes. Another European Standard series covering tubes for pressure purposes is: EN 10216: Seamless steel tubes for pressure purposes. According to the CEN/CENELEC Internal Regulations, the nati

26、onal standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kin

27、gdom. Foreword to amendment A1This document (EN 10217-1:2002/A1:2004) has been prepared by Technical Committee ECISS/TC 29 “Steel tubes and fittings for steel tubes”, the secretariat of which is held by UNI. This Amendment to European Standard EN 10217-1:2002 shall be given the status of a national

28、standard, either by publication of an identical text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the latest by July 2005. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade As

29、sociation, and supports essential requirements of EU Directive 97/23/EC. EN 10217-1:2002 (E) 4For relationship with EU Directive 97/23/EC, see informative Annex ZA, which is an integral part of this document.According to the CEN/CENELEC Internal Regulations, the national standards organizations of t

30、he following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain

31、, Sweden, Switzerland and United Kingdom. EN 10217-1:2002 (E) 51 SCOPE This Part of EN 10217 specifies the technical delivery conditions for two qualities TR1 and TR2 of welded tubes of circular cross section, made of non-alloy quality steel and with specified room temperature properties.2 NORMATIVE

32、 REFERENCES EN 10217 incorporates by date or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For date references, subsequent amendments to or revisions of, any of these public

33、ations apply to EN 10217 only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). The requirements of EN 10217 rule when they differ from those in the standards and documents referred to below:EN 7

34、60, Welding consumables - Fluxes for submerged arc welding Classification EN 895, Destructive tests on welds in metallic materials - Transverse tensile test EN 910, Destructive tests on weld in metallic materials -Bend test EN 1321, Destructive tests on welds in metallic materials - Macroscopic and

35、microscopic examination of weldsEN 10002-1, Metallic materials - Tensile testing - Part 1 : Method of test (at ambient temperature) EN 10020, Definitions and classification of grades of steel EN 10021, General technical delivery requirements for steel and iron products EN 10027-1, Designation system

36、s for steels - Part 1 : Steel names, principle symbols.EN 10027-2, Designation systems for steels Part 2 : Numerical systems. EN 10045-1, Metallic materials - Charpy impact test - Part 1 : Test method EN 10052, Vocabulary of heat treatment terms for ferrous products EN 10204, Metallic products - Typ

37、es of inspection documents ENV 10220, Seamless and welded steel tubes - Dimensions and masses per unit length EN 10233, Metallic materials - Tubes - Flattening test EN 10234, Metallic materials - Tubes - Drift expanding test EN 10246-1, Non-Destructive Testing of steel tubes Part 1 : Automatic elect

38、romagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightnessEN 10246-3, Non-Destructive Testing of steel tubes - Part 3 :Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes f

39、or the detection of imperfections EN 10246-5, Non-Destructive Testing of steel tubes Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfectionsEN 10217-1:200

40、2 (E) 6EN 10246-7, Non-Destructive Testing of steel tubes - Part 7 : Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections EN 10246-8, Non-Destructive Testing of steel tubes Part 8: Automatic ultr

41、asonic testing of the weld seam of electric welded tubes for the detection of longitudinal imperfectionsEN 10246-9, Non-Destructive Testing of steel tubes Part 9: Automatic ultrasonic testing of the weld seam of submerged arc-welded steel tubes for the detection of longitudinal and/or transverse imp

42、erfectionsEN 10246-10, Non-Destructive Testing of steel tubes Part.10: Radiographic testing of the weld seam of automatic fusion arc-welded steel tubes for the detection of imperfections.EN 10256, Non-Destructive Testing of steel tubes - Qualification and competence of level 1 and level 2 NDT person

43、nel prEN 102661), Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards EN ISO 377, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997) prEN 10168 1), Iron and steel product

44、s - Inspection documents - List of information and description EN ISO 2566-1, Steel - Conversion of elongation values Part 1: Carbon and low-alloy steels (ISO 2566-1:1984) ISO 14284, Steel and iron - Sampling and preparation of samples for the determination of chemical composition CR 10260, Designat

45、ion systems for steel - Additional symbolsCR 10261, ECISS Information Circular IC 11 - Iron and steel - Review of available methods of chemical analysis. 3 TERMS AND DEFINITIONS For the purposes of this Part of EN 10217, the definitions given in EN 10020, EN 10021, EN 10052, prEN 10266 and the follo

46、wing apply. 3.1employer organisation for which a person works on a regular basis. NOTE The employer may be either the tube manufacturer or a third party organisation providing Non-Destructive Testing (NDT) services. 3.2qualification of welding procedure testing and inspection of the welding procedur

47、e for submerged arc welded (SAW) tubes by the manufacturer in accordance with annex A . 3.3approval of welding procedure testing and inspection of the welding procedure for SAW tubes witnessed and approved in accordance with Annex A by an authorised body. 1) In preparation; until this document is pu

48、blished as a European standard, a corresponding national standard should be agreed at the time of enquiry and order.EN 10217-1:2002 (E) 74 SYMBOLS For the purposes of this Part of EN 10217, the symbols given in prEN 10266 and the following apply: C1, C2 category conformity indicators (see clauses 7.

49、3.1 and 7.3.3.) TC test category. 5 CLASSIFICATION AND DESIGNATION 5.1 Classification In accordance with the classification system in EN 10020, the steel grades are classified as non-alloy quality steels. 5.2 Designation 5.2.1 For the tubes covered by this Part of EN 10217 the steel designation consists of: a) the number of this Part of EN 10217; plus either: a) the steel name in accordance with EN 10027-1 and CR 10260;or:a) the steel number allocated in accordance with EN 10027-2 . 5.2.2 The steel name is designated by: a) the capital le