BS EN 4652-410-2015 Aerospace series Connectors coaxial radio frequency Type 4 C interface Clamp nut assembly version Straight plug Product standard《航空航天系列 射频同轴连接器 类型4 C接口 紧固螺母组件版本.pdf

《BS EN 4652-410-2015 Aerospace series Connectors coaxial radio frequency Type 4 C interface Clamp nut assembly version Straight plug Product standard《航空航天系列 射频同轴连接器 类型4 C接口 紧固螺母组件版本.pdf》由会员分享，可在线阅读，更多相关《BS EN 4652-410-2015 Aerospace series Connectors coaxial radio frequency Type 4 C interface Clamp nut assembly version Straight plug Product standard《航空航天系列 射频同轴连接器 类型4 C接口 紧固螺母组件版本.pdf（16页珍藏版）》请在麦多课文档分享上搜索。

1、BSI Standards PublicationBS EN 4652-410:2015Aerospace series Connectors, coaxial, radiofrequencyPart 410: Type 4, C interface Clampnut assembly version Straight plug Product standardBS EN 4652-410:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 4652-410:201

2、5.The UK participation in its preparation was entrusted to Technical Committee ACE/6, Aerospace avionic electrical and fibre optic technology.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessa

3、ry provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 89785 6 ICS 49.060 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was p

4、ublished under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 4652-410:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 4652-410 December 2015 ICS 49.060 English Version Aerospac

5、e series - Connectors, coaxial, radio frequency - Part 410: Type 4, C interface - Clamp nut assembly version - Straight plug - Product standard Srie arospatiale - Connecteurs coaxiaux pour radio frquences - Partie 410 : Type 4, interface C - Version presse toupe - Fiche droite - Norme de produit Luf

6、t- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 410: Typ 4, C-Anschluss - Klemmverbindung - freier Steckverbinder, gerade - Produktnorm This European Standard was approved by CEN on 6 June 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate

7、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standa

8、rd exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the natio

9、nal standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slov

10、akia, Slovenia, Spain, Sweden, Switzerland, Turkey andUnited Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means

11、 reserved worldwide for CEN national Members. Ref. No. EN 4652-410:2015 EBS EN 4652-410:2015EN 4652-410:2015 (E) 2 Contents Page European foreword 3 1 Scope 4 2 Normative references 4 3 Terms and definitions . 4 4 Required characteristics 4 5 Test methods 8 6 Qualification 10 7 Quality assurance 11

12、8 Designation . 11 9 Marking . 11 10 Packaging . 11 11 Storage 11 BS EN 4652-410:2015EN 4652-410:2015 (E) 3 European foreword This document (EN 4652-410:2015) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carri

13、ed out in accordance with the rules of this Association, this European Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard,

14、either by publication of an identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be withdrawn at the latest by June 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or

15、 CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech R

16、epublic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. B

17、S EN 4652-410:2015EN 4652-410:2015 (E) 4 1 Scope This European Standard specifies the characteristics of bayonet coupling (C interface) coaxial straight plugs 50 ohms. The cable to connector assembly is a clamp technology. 2 Normative references The following documents, in whole or in part, are norm

18、atively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2591 1), Aerospace series Elements of electrical and optic

19、al connection Test methods EN 2812, Aerospace series Stripping of electric cables EN 4652-001, Aerospace series Connectors, coaxial, radio frequency Part 001: Technical specification EN 4652-412, Aerospace series Connectors, coaxial, radio frequency Part 412: Type 4, C interface Clamp nut assembly v

20、ersion Square flange receptacle Product standard EN 4652-413, Aerospace series Connectors, coaxial, radio frequency Part 413: Type 4, C interface Clamp nut assembly version Bulkhead receptacle Product standard EN 9133, Aerospace series Quality management systems Qualification procedure for aerospace

21、 standard parts TR 6058, Aerospace series Cable code identification list 2)3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 4652-001 apply. 4 Required characteristics The connection technology shall comply to required tests described in Clause 5. Inter

22、face shall comply to EN 4652-001. Water ingress resistance is required in unmated condition for cable group A. 1) All parts quoted in this standard. 2) Published as ASD-STAN Technical Report at the date of publication of this standard. http:/www.asd-stan.org/ BS EN 4652-410:2015EN 4652-410:2015 (E)

23、5 4.1 Configuration, dimension and mass Mass without heat shrink tubing. See Figure 1 and Table 1. Dimensions in millimetres Key 1 Marking 2 Flat 10 3 HEX. F Figure 1 C straight plug Marking: see Clause 9. Table 1 C straight plug dimensions and mass Cable group A C D E HEX. F Mass (cable jacket) (ca

24、ble conductor) g max. max. max. max. A 48 7,8 2,3 15 12 50,2 B 42 5,55 1,4 13 8 42,5 BS EN 4652-410:2015EN 4652-410:2015 (E) 6 4.2 Materials and finish Centre contact . : Copper alloy gold plated over nickel undercoat Insulators : PTFE Sealings : Silicone rubber or silicon fluoride Body : Copper all

25、oy, nickel plated Heat shrink tube . : Polyolefin Coupling nut, rear screw and other parts materials shall have mechanical and electrical characteristics consistent with the requirements of this product standard. 4.3 Temperature Operating temperature shall be between 65 C and 165 C. 4.4 Electrical c

26、haracteristics Impedance : 50 Maximum operating frequency : 6 GHz VSWR : 1,15 up to 6 GHz Insertion loss . : 0,05f dB max., f in GHz Contact resistance (initial centre contact) : 1,0 m max. Insulation resistance : 5 000 M min. Withstand voltage . : 1 500 Veff (at sea level) 4.5 General characteristi

27、cs Force to engage or disengage Longitudinal force . : 20 N Torque . : 0,45 Nm max. Service life . : 500 cycles Retention of centre contact . : 27 N Retention of cable : see Table 2. BS EN 4652-410:2015EN 4652-410:2015 (E) 7 Table 2 Retention of cable Cable group Retention of cable N min. A 180 B 18

28、0 4.6 Admissible cables, tools and stripping lengths See Table 3 to Table 5. Table 3 Stripping lengths Cable group Cable code (see TR 6058) Stripping lengths mm A KW B KX Table 4 Stripping lengths cable group A A B min. mm max. mm min. mm max. mm 4,6 5,4 8,6 9,4 Table 5 Stripping lengths cable group

29、 B A B min. mm max. mm min. mm max. mm 3,6 4,4 7,6 8,4 For stripping, see EN 2812. BS EN 4652-410:2015EN 4652-410:2015 (E) 8 5 Test methods See Table 6. Table 6 Test methods EN 2591- Designation of the test Details 101 Visual examination Applicable 102 Examination of dimensions and mass See 4.1. 201

30、 Contact resistance - low level Applicable on centre contact 202 Contact resistance at rated current 1,0 m max. = initial centre contact, and 1,5 m max after test For nickel plated connectors: 0,4 m max. = initial external contact, and 1,5 m max after test 204 Discontinuity of contacts in the micros

31、econd range Duration of micro discontinuity: 1 s Method B Test time: throughout duration of tests EN 2591-402 and EN 2591-403 206 Measurement of insulation resistance 5 000 M min. 207 Voltage proof test Method A Pressure Mated aUnmated aSea level 1 500 1 500 12,1 kPa 800 550 4,7 kPa 375 350 2,7 kPa

32、250 200 aValues in Volts RMS. 212 Surface transfer impedance Applicable (up to 100 MHz) 3 m 1 MHz 1 m 10 MHz 3 m 30 MHz 5 m 100 MHz 214 Lightning strike, current and voltage pulse 10 kA wave form 5 A, 10 A RMS 221 Voltage Standing Wave Ratio (VSWR) Method B VSWR 1,15 up to 6 GHz BS EN 4652-410:2015E

33、N 4652-410:2015 (E) 9 EN 2591- Designation of the test Details 222 Insertion Loss (I.L.) 0,05f dB max., f in GHz Measurement shall be performed with connector mated with EN 4652-412 or EN 4652-413 receptacle from same technology and cable group. 223 Measurement of characteristic impedance of a coaxi

34、al connector or contact 50 5 at 200 MHz 224 RF leakage 50 dB for cable group A at 2 GHz to 3 GHz 55 dB for cable group B at 2 GHz to 3 GHz 225 RF high potential withstanding voltage 1 000 V at 5 MHz 226 Corona level Corona extinction voltage 315 V rms at 4,4 kPa (70000 feet altitude) 303 Cold/low pr

35、essure and damp heat Five (5) cycles Minimum temperature 60 C 305 Rapid change of temperature Mated connectors TA= +05165 C; TB= 5065 C. 307 Salt mist The connectors shall be suspended in the test chamber with non-metallic cords, so that no accumulation of condensed saline solution can occur. The co

36、nnectors shall be: subjected to 50 cycles of mating and unmating at a rate 5 cycles/min.; exposed to the salt mist: mated for 240 h Not exposed to the salt mist: unmated for 48 h. 308 Sand and dust The mated connectors shall be arranged so that their longitudinal axis is parallel to the wind directi

37、on, with the rear of the plug facing the wind. Wind velocity in the duct: (3,5 0,5) m/s Number of cycles: one (1) 311 Low air pressure Refer to test EN 2591-207. BS EN 4652-410:2015EN 4652-410:2015 (E) 10 EN 2591- Designation of the test Details 314 Immersion at low air pressure Specimen without hea

38、t shrinkable tube. In unmated condition (applicable only for cable group A connector). After the three (3) cycles, remove the specimen from salt water, clean the interface with soft paper. In mated condition: not applicable. 315 Fluid resistance See EN 4652-001. 317 Flammability Method A 402 Shock M

39、ethod A, half sine Severity 30 g, duration 11 ms Number of shocks: one (1) in each way for each of the three (3) axis (six (6) shocks in all) 403 Sinusoidal and random vibration Method A: sinusoidal vibration with the following individual modalities: Level 2 50 Hz to 70 Hz 1,5 mm double amplitude 70

40、 Hz to 2 000 Hz 15 g Three (3) axis or two (2) axis (straight connectors) Duration 4 h per axis at ambient temperature 404 Transverse load Applicable on rear of plug; torque moment = 5 Nm 406 Mechanical endurance 500 cycles 408 Mating and unmating forces 0,45 Nm max. 409 Contact retention in insert

41、27 N min., applicable on cabled specimen 417 Tensile strength (crimped connection) See Table 2. 418 Gauge insertion/extraction forces (female contacts) Not applicable 507 Plating porosity Applicable 508 Measurement of thickness of coating on contacts Applicable 509 Adhesion of coating on contacts Ap

42、plicable 513 Magnetic permeability 2 6 Qualification Qualification test programme: see EN 4652-001. BS EN 4652-410:2015EN 4652-410:2015 (E) 11 7 Quality assurance See EN 9133. 8 Designation EXAMPLE Description block CONNECTOR, COAXIAL Identity block EN4652-410A50 Number of the basic standard Connect

43、or interface type code (see EN 4652-001) 4 = C Technology of assembly code (see EN 4652-001) 1 = clamp Connector model code (see EN 4652-001) 0 = straight plug Cable group code (see Table 3) Impedance: 50 = 50 NOTE If necessary, the code I9005 shall be placed between the description block and the id

44、entity block. 9 Marking See EN 4652-001. 10 Packaging See EN 4652-001. 11 Storage See EN 4652-001. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standards and other standards-related publications, information and services

45、.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbout usWe bring together business, industry, government, consumers, inno

46、vators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultation process. Organizations of all sizes and across all sectors choose s

47、tandards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Customer Services team or Knowledge Centre.Buying standardsYou can buy

48、and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards from other Standards Development Organizations, hard copies can be order

49、ed from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) youll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its avail