BS EN 1107-2-2001 Flexible sheets for waterproofing - Determination of dimensional stability - Plastic and rubber sheets for roof waterproofing《防水柔性板 尺寸稳定性的测定 屋顶防水用橡胶和塑料薄板》.pdf

《BS EN 1107-2-2001 Flexible sheets for waterproofing - Determination of dimensional stability - Plastic and rubber sheets for roof waterproofing《防水柔性板 尺寸稳定性的测定 屋顶防水用橡胶和塑料薄板》.pdf》由会员分享，可在线阅读，更多相关《BS EN 1107-2-2001 Flexible sheets for waterproofing - Determination of dimensional stability - Plastic and rubber sheets for roof waterproofing《防水柔性板 尺寸稳定性的测定 屋顶防水用橡胶和塑料薄板》.pdf（10页珍藏版）》请在麦多课文档分享上搜索。

1、BRITISH STANDARD BS EN 1107-2:2001 Flexible sheets for waterproofing Determination of dimensional stability Part 2: Plastic and rubber sheets for roof waterproofing The European Standard EN 1107-2:2001 has the status of a British Standard ICS 91.100.50 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PER

2、MITTED BY COPYRIGHT LAWBS EN 1107-2:2001 This British Standard, having been prepared under the direction of the Sector Committee for Building and Civil Engineering, was published under the authority of the Standards Committee and comes into effect on 15 March 2001 BSI 03-2001 ISBN 0 580 37011 9 Nati

3、onal foreword This British Standard is the official English language version of EN 1107-2:2001. The UK participation in its preparation was entrusted by Technical Committee B/546, Flexible sheets for waterproofing, to Subcommittee B/546/2, Roof sheeting and sealing sheeting, which has the responsibi

4、lity to: A list of organizations represented on this subcommittee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section enti

5、tled “International Standards Correspondence Index”, or by using the “Find” facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complia

6、nce with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international a

7、nd European developments and promulgate them in the UK. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 6, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the document was last issued

8、. Amendments issued since publication Amd. No. Date CommentsEUROPEANSTANDARD NORMEEUROPENNE EUROPISCHENORM EN11072 January2001 ICS91.100.50 Englishversion FlexiblesheetsforwaterproofingDeterminationofdimensional stabilityPart2:Plasticandrubbersheetsforroofwaterproofing FeuillessouplesdtanchitDtermin

9、ationdelastabilit dimensionellePartie2:Feuillesdtanchitdetoiture plastiquesetlastomres AbdichtungsbahnenBestimmungderMahaltigkeitTeil 2:KunststoffundElastomerbahnenfrDachabdichtungen ThisEuropeanStandardwasapprovedbyCENon1January2001. CENmembersareboundtocomplywiththeCEN/CENELECInternalRegulationswh

10、ichstipulatetheconditionsforgivingthisEurope an Standardthestatusofanationalstandardwithoutanyalteration.Uptodatelistsandbibliographicalreferencesconcernings uchnational standardsmaybeobtainedonapplicationtotheManagementCentreortoanyCENmember. ThisEuropeanStandardexistsinthreeofficialversions(Englis

11、h,French,German).Aversioninanyotherlanguagemadebytra nslation undertheresponsibilityofaCENmemberintoitsownlanguageandnotifiedtotheManagementCentrehasthesamestatusasthe official versions. CENmembersarethenationalstandardsbodiesofAustria,Belgium,CzechRepublic,Denmark,Finland,France,Germany,Greece, Ice

12、land,Ireland,Italy,Luxembourg,Netherlands,Norway,Portugal,Spain,Sweden,SwitzerlandandUnitedKingdom. EUROPEANCOMMITTEEFORSTANDARDIZATION COMITEUROPENDENORMALISATION EUROPISCHESKOMITEEFRNORMUNG ManagementCentre:ruedeStassart,36B1050Brussels 2001CEN Allrightsofexploitationinanyformandbyanymeansreserved

13、 worldwideforCENnationalMembers. Ref.No.EN11072:2001EPage2 EN11072:2001 Contents Page Foreword3 Introduction 3 1 Scope3 2 Normativereferences 3 3 Termsanddefinitions. .3 4 Principle 3 5 Apparatus4 6 Sampling.4 7 Preparationoftestspecimens . .4 8 Procedure .4 9 Expressionofresults . .5 10 Testreport

14、.6Page3 EN11072:2001 Foreword ThisEuropeanStandardhasbeenpreparedbyTechnicalCommitteeCEN/TC254“Flexiblesheetsfor waterproofing“,thesecretariatofwhichisheldbyBSI. ThisEuropeanStandardshallbegiventhestatusofanationalstandard,eitherbypublicationofanidentical textorbyendorsement,atthelatestbyJuly2001,an

15、dconflictingnationalstandardsshallbewithdrawnat thelatestbyJuly2002. AccordingtotheCEN/CENELECInternalRegulations,thenationalstandardsorganizationsofthefollowing countriesareboundtoimplementthisEuropeanStandard:Austria,Belgium,CzechRepublic,Denmark, Finland,France,Germany,Greece,Iceland,Ireland,Ital

16、y,Luxembourg,Netherlands,Norway,Portugal, Spain,Sweden,SwitzerlandandtheUnitedKingdom. Introduction ThisEuropeanStandardisintendedforcharacterisationofplasticandrubbersheetsasmanufacturedor suppliedbeforeuse.Thistestmethodrelatesexclusivelytoproducts,ortotheircomponentswhere appropriate,andnottowate

17、rproofingmembranesystemscomposedofsuchproductsandinstalledinthe works. ThistestisintendedtobeusedinconjunctionwithEuropeanStandard“DefinitionsandCharacteristics“for plasticandrubbersheetsforroofwaterproofing. 1Scope ThisEuropeanStandardspecifiesamethodforthedeterminationofdimensionalvariationafterhe

18、atingof plasticandrubbersheetsforroofwaterproofing. 2 Normativereferences ThisEuropeanStandardincorporates,bydatedorundatedreferences,provisionsfromotherpublications. Thesenormativereferencesarecitedattheappropriateplacesinthetextandthepublicationsarelisted hereafter.Fordatedreferences,subsequentame

19、ndmentstoorrevisionsofanyofthesepublicationsapply tothisEuropeanStandardonlywhenincorporatedinitbyamendmentorrevision.Forundatedreferences, thelatesteditionsofthepublicationreferredtoapplies(includingamendments). prEN13416:1998 FlexiblesheetsforwaterproofingBitumen,plasticandrubbersheetsforroof wate

20、rproofingRulesforsampling. 3 Termsanddefinitions Forthepurposeofthisstandard,thefollowingdefinitionapplies: 3.1 topsurface uppersideofthesheet,asusedinsitu.Itisusuallytheinsideoftheroll 4Principle Theprincipleofthetestismeasurementoftheinitiallongitudinalandtransversaldimensionsofthetest specimen.He

21、atingofthetestspecimenforaspecifiedtimeataspecifiedtemperature.Measurementofthe resultinglongitudinalandtransversaldimensionsofthetestspecimensafterreconditioningandcalculation ofthedimensionalvariations.Page4 EN11072:2001 5Apparatus Thetestingequipmentconsistsofpartsindicatedin5.1and5.2 5.1 Ventila

22、tedairoven Theovenshallberegulatedinsuchawaythatthetestspecimenscanbemaintainedatthespecified temperature 2 Cduringthefulltestingperiod.Athermometerorathermocoupleshallbeplacednearthe testspecimensrecordingtherealtesttemperature. Theovenshallbesoequippedthattestspecimenscanbeplacedinitwithouthinderi

23、ngtheirdimensional variationsduringthetestperiodforexamplebyplacingthetestspecimenonaglassplatecoatedwith talcumpowdercanforexampleeffectthis. 5.2 Mechanicaloropticalmeasuringdevice Themeasuringdeviceshallbecapableofdeterminingthelongitudinalandtransversaldimensionsofthe testspecimenswithanaccuracyo

24、fatleast0,1mm. 6Sampling TestsamplesshallbetakeninaccordancewithprEN13416:1998. 7 Preparationoftestspecimens Takeatleastthreesquaretestspecimensofapproximately250mmx250mm,evenlydistributedacross thewidthofthesheet,theouterones(100 10)mmfromtheedges. NOTELargertestspecimensmayberequiredwhenthesurface

25、profilemakesthisnecessary. Applyinthemiddleofthetestspecimenspermanentmarkingsinthelongitudinalandtransversaldirection asindicatedinFigure1. Anymethodofmarkingshallallowaccuracyofmeasurementwiththechosenmeasurementdevicetoat least0,1mmasprescribedin5.2. Conditionthetestspecimens,priortotesting,forat

26、least20hinastandardatmosphereof (23 2) Cand(50 5)%relativehumidity. 8Procedure 8.1Test conditions Thetestspecimensshallbesubjectedtoatemperatureof(80 2) Cfor6h15min. 8.2 Testmethod Measuretheinitiallongitudinalandtransversaldimensions( L 0 and T 0 )oftheconditionedtestspecimensas indicatedinFigure1w

27、ithanaccuracyof0,1mm. Placethetestspecimensontheplatewiththetopsurfaceuppermostintheovenasdescribedin5.1 regulatedat(80 2) C.Page5 EN11072:2001 After6h 15min,takethetestspecimensoutoftheovenontheplateandreconditionthemforatleast 60mininastandardatmosphereof(23 2) Cand(50 5)%relativehumidity.Measurea

28、gainthe longitudinalandtransversaldimensions( L t and T t )asindicatedinFigure1withanaccuracyof0,1mm. Dimensionsinmillimetres Key 1Permanentmarking 2Transversalcentreline 3Longitudinalcentreline Figure1Measurementofdimensionsoftestspecimen 9 Expressionofresults 9.1Evaluation Foreachtestspecimen,calc

29、ulateandstatethevariationindimension( L)and( T),expressedasa percentageofinitialdimensions,usingtheequations L LL L t 0 0 100 and (1) T TT T t 0 0 100 (2) where L 0 and T 0 areinitialdimensionsinmillimetres,measuredwithanaccuracyof0,1mm. L t and T t aredimensionsafterexposuretoelevatedtemperature,in

30、millimetres,measuredwithanaccuracy of0,1mm. Land Tcanbepositiveornegativeandshallberoundedto0,1percent. Statethemeanvaluesof Land Tforthesamplestested.Page6 EN11072:2001 9.2 Precisionofthetestmethod Noinformationisavailableatthistime. 10Test report Thetestreportshallincludethefollowinginformation: a

31、) referencetothisEuropeanStandard(EN11072)andanydeviationfromit; b) alldetailsnecessarytoidentifytheproducttested; c) informationonsamplinginaccordancewithclause6; d) detailsofpreparationofthetestspecimeninaccordancewithclause7; e) thetestresultsinaccordancewithclause9; f) anypeculiaritiesinthemetho

32、demployedorencounteredduringthetest; g) thedateofthetest(s).blankBS EN 1107-2:2001 BSI 389 Chiswick High Road London W4 4AL BSI British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the in

33、ternational level. It is incorporated by Royal Charter. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. It is the constant aim of BSI to improve the quality of our products and services

34、. We would be grateful if anyone finding an inaccuracy or ambiguity while using this British Standard would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside front cover. Tel: 020 8996 9000. Fax: 020 8996 7400. BSI offers members an individ

35、ual updating service called PLUS which ensures that subscribers automatically receive the latest editions of standards. Buying standards Orders for all BSI, international and foreign standards publications should be addressed to Customer Services. Tel: 020 8996 9001. Fax: 020 8996 7001. Standards ar

36、e also available from the BSI website at http:/www.bsi-. In response to orders for international standards, it is BSI policy to supply the BSI implementation of those that have been published as British Standards, unless otherwise requested. Information on standards BSI provides a wide range of info

37、rmation on national, European and international standards through its Library and its Technical Help to Exporters Service. Various BSI electronic information services are also available which give details on all its products and services. Contact the Information Centre. Tel: 020 8996 7111. Fax: 020

38、8996 7048. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details of these and other benefits contact Membership Administration. Tel: 020 8996 7002. Fax: 020 8996 7001. Further information about BSI

39、 is available on the BSI website at http:/www.bsi-. Copyright Copyright subsists in all BSI publications. BSI also holds the copyright, in the UK, of the publications of the international standardization bodies. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be

40、reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and s

41、ize, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. If permission is granted, the terms may include royalty payments or a licensing agreement. Details and advice can be obtained from the Copyright Manager. Tel: 020 8996 7070.