BS AU 225-1988 Specification for dimensions of steering ball joints for commercial road vehicles《商用道路车辆转向球形接合件尺寸规范》.pdf
《BS AU 225-1988 Specification for dimensions of steering ball joints for commercial road vehicles《商用道路车辆转向球形接合件尺寸规范》.pdf》由会员分享,可在线阅读,更多相关《BS AU 225-1988 Specification for dimensions of steering ball joints for commercial road vehicles《商用道路车辆转向球形接合件尺寸规范》.pdf(6页珍藏版)》请在麦多课文档分享上搜索。
1、BRITISH STANDARD AUTOMOBILE SERIES BS AU 225:1988 ISO7803:1987 Specification for Dimensions of steering ball joints for commercial road vehicles ISO title: Commercial road vehicles Steering ball joints UDC 629.114.4:629.11.014.5:629.11.011.72:(083.3)BSAU225:1988 This BritishStandard, having been pre
2、pared under the directionof the Automobile Standards Committee, was published under the authority ofthe Board of BSI and comesintoeffect on 31August1988 BSI02-2000 The following BSI references relate to the work on this standard: Committee reference AUE/13 Draft for comment82/73029 DC ISBN 0 580 167
3、30 5 Committees responsible for this British Standard The preparation of this BritishStandard was entrusted by the Automobile Standards Committee (AUE/-) to Technical Committee AUE/13, upon which the following bodies were represented: Department of Transport (Highways) Freight Transport Association
4、Institute of Road Transport Engineers (Incorporated) London Regional Transport Ministry of Defence National Bus Company Road Haulage Association Ltd. Society of Motor Manufacturers and Traders Limited Amendments issued since publication Amd. No. Date of issue CommentsBSAU225:1988 BSI 02-2000 i Conte
5、nts Page Committees responsible Inside front cover National foreword ii 1 Scope and field of application 1 2 Dimensions 1 3 Designation 1BSAU225:1988 ii BSI 02-2000 National foreword This BritishStandard has been prepared under the direction of the Automobile Standards Committee and is identical wit
6、h ISO7803:1987 “Commercial road vehicles Steering ball joints”, published by the International Organization for Standardization (ISO). Terminology and conventions. The text of the International Standard has been approved as suitable for publication as a BritishStandard without deviation. Some termin
7、ology and certain conventions are not identical with those used in BritishStandards; attention is drawn especially to the following. The comma has been used as a decimal marker. In BritishStandards it is current practice to use a full point on the baseline as the decimal marker. Wherever the words “
8、International Standard” or “ISO7803” appear, referring to this standard, they should be read as “BritishStandard” and “BS AU225” respectively. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct appli
9、cation. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pagesi andii, page1 and a back cover. This standard has been updated (see copyright date) and may have had amendments i
10、ncorporated. This will be indicated in the amendment table on the inside front cover.BSAU225:1988 BSI 02-2000 1 1 Scope and field of application This International Standard specifies the main dimensions of steering ball joints for commercial vehicles. The ball joint is considered as being a single p
11、iece with its socket. Thus this International Standard covers the ball-socket assembly. 2 Dimensions For dimensions, see the figure and table. 3 Designation Example for the designation of a ball joint of nominal size S 8 D=30mm, where the angles =40 and=20 : Ball joint ISO78033040 20 Dimensions in m
- 1.请仔细阅读文档,确保文档完整性,对于不预览、不比对内容而直接下载带来的问题本站不予受理。
- 2.下载的文档,不会出现我们的网址水印。
- 3、该文档所得收入(下载+内容+预览)归上传者、原创作者;如果您是本文档原作者,请点此认领!既往收益都归您。
下载文档到电脑,查找使用更方便
10000 积分 0人已下载
下载 | 加入VIP,交流精品资源 |
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- BSAU2251988SPECIFICATIONFORDIMENSIONSOFSTEERINGBALLJOINTSFORCOMMERCIALROADVEHICLES 商用 道路 车辆 转向 球形 接合
链接地址:http://www.mydoc123.com/p-547806.html